Abstract:Hydrodeoxygenation (HDO) of lignin-derived bio-oil offers a promising route for the production of advanced biofuels. However, the conventional HDO of lignin-derived bio-oil faces serious problems, such as low hydrocarbon yield and easy deactivation of catalysts. Herein, a novel reaction system consisting of a highly stable bifunctional catalyst (i.e., Ni-WOx/NiAl2O4) and a dodecane solvent was developed for the HDO of lignin-derived phenolics. The Ni-0 species, derived from NiWO4 precursors on the NiAl2O4, were of small crystallite size and high dispersion, together with the strong oxophilicity of W, thereby exhibiting high activity. The use of a highly stable NiAl2O4 spinel support and the replacement of common solid acid with more stable WOx for the cleavage of C-O bond accounted for excellent stability. The optimized 10Ni-15WO(x)/NiAl2O4 exhibited a high guaiacol conversion of 97.8% with a high cycloalkane yield of 83.8% under the optimum conditions (250 degrees C, 5 MPa H-2, and 4 h). Cycloalkanes with a high yield over 90% were also obtained by the HDO of other complex lignin-derived compounds. More importantly, the catalyst always retained its initial activity for the HDO of guaiacol in five runs, with negligible coke formation. Subsequently, the HDO behavior of the bio-oil obtained from walnut shell pyrolysis was also studied. The relative content of cycloalkanes in the products reached 44.3% after the reaction. This study highlights the prospect of a highly stable catalyst consisting of hydrogenation metal and oxophilic promoter, and dodecane solvent to enable efficient production of cycloalkanes from the HDO of lignin-derived phenolics.

Highly Selective Conversion of Natural Oil to Alcohols or Alkanes over a Pd Stabilized CuZnAl Catalyst under Mild Conditions

Selective Production of gamma-Valerolactone and Valeric Acid in One-Pot Bifunctional Metal Catalysts

Highly Selective Catalytic Conversion of Phenolic Bio‐Oil to Alkanes

Selective Conversion of CO2 into para-Xylene over a ZnCr2 O4 -ZSM-5 Catalyst

Selective Conversion of Furfural to Cyclopentanone with CuZnAl Catalysts

Syngas conversion to higher alcohols via wood-framed Cu/Co-carbon catalyst

One-Pass Conversion of Benzene and Syngas to Alkylbenzenes by Cu–ZnO–Al2O3 and ZSM-5 Relay

Selective conversion of furfural to cyclopentanone over the N-doped CuNi alloy carbon materials derived from porphyrin-based bimetallic metal-organic frameworks

Temperature-Controlled Selectivity of Hydrogenation and Hydrodeoxygenation in the Conversion of Biomass Molecule by the Ru1/mpg-C3N4 Catalyst

Spatial segregation of catalytic sites within Pd doped H-ZSM-5 for fatty acid hydrodeoxygenation to alkanes

Coupling Conversion of CO2 and High‐carbon Alkane to CO and Gasoline

Selective hydrodeoxygenation of lignin-derived phenolics to cycloalkanes over highly stable NiAl<sub>2</sub>O<sub>4</sub> spinel-supported bifunctional catalysts

Highly Selective Production of C5-C12 Hydrocarbons over Efficient Ru/heteropoly-acid Catalysts

Selective Conversion of Syngas to Propane over ZnCrOx-SSZ-39 OX-ZEO Catalysts

Selective conversion of CO2 and H2 into aromatics

Zn-doped W/aluminium oxide catalyst: Efficient strategy towards sustainable oxidation of alcohols

Catalyst-Controlled Selectivity in Oxidation of Olefins: Highly Facile Success to Functionalized Aldehydes and Ketones

Direct Conversion of CO and H2O into Liquid Fuels under Mild Conditions

Selective Conversion of Furfural to Cyclopentanone or Cyclopentanol Using Different Preparation Methods of Cu–Co Catalysts

One-step synthesis of highly active and stable Ni-ZrO2 catalysts for the conversion of methyl laurate to alkanes