Abstract:Aluminum matrix composite have shown the great prospects in improving service performance and life of high-end equipment under harsh conditions due to lightweight and high specific strength. However, the presence of coarse Mg2Si phase with undesired morphology in Mg2Si/Al composites limits their engineering application. This study proposes a strategy of TiB2 ceramic particles regulating the morphology and size of Mg2Si to strengthen the aluminum matrix composites by incorporating dual-scale hybrid reinforcements of Mg2Si and TiB2. The TiB2 particles were introduced into the Al-15 wt pct Mg2Si composite by a master alloy method, and the influence of TiB2 particles on the morphology and size of Mg2Si, and Al grains of composites were investigated. The results demonstrate that 3 wt pct TiB2 particles can refine the primary Mg2Si from 14.6 to 10.4 μm, resulting in a more regular morphology. Additionally, the eutectic Mg2Si transforms from a long and slender Chinese character shape to a short rod shape, reducing the aspect ratio by 65.9 pct from 10.9 to 3.7. During the solidification process, TiB2 particles promote the heterogeneous nucleation of primary Mg2Si phases and impede the growth, leading to significant refinement. However, the improved morphology of eutectic Mg2Si is mainly attributed to the inhibited preferential growth due to the formation of a nanoparticle layer, with no observed heterogeneous nucleation of TiB2. Moreover, TiB2 particles significantly refine the grain size of Al from 212.7 to 70.8 μm. The addition of 3 wt pct TiB2 greatly improves the strength of the composites from 302 to 373 MPa, without losing ductility. After T6 heat treatment, Al-15 wt pct Mg2Si composites exhibit simultaneous improvement in the strength and ductility. Compared with composites without TiB2 particles (361 MPa and 32 pct), Al-15Mg2Si-3TiB2 composites have more superior strength–ductility combination of 434 MPa and 35 pct due to the significant modification of Mg2Si phase, grain refinement, and Orowan strengthening.

A New Approach for Improving the Elevated-Temperature Strength and Ductility of Al–Cu–Mg–Si Alloys with Minor Amounts of Dual-Phased Submicron/nanosized TiB2–TiC Particles

Enhanced Strength and Ductility at Room and Elevated Temperatures of Al-Cu Alloy Matrix Composites Reinforced with Bimodal-Sized TiCp Compared with Monomodal–sized TiCp

The Superior Elevated-Temperature Mechanical Properties of Al-Cu-Mg-Si Composites Reinforced with in Situ Hybrid-Sized TiCx-TiB2 Particles

Microstructure Refinement and Strengthening Mechanisms of Bimodal-Sized and Dual-Phased (Ticn-Al3tim)/al Hybrid Composites Assisted Ultrasonic Vibration

Enhanced high temperature mechanical properties and heat resistance of an Al–Cu–Mg–Fe–Ni matrix composite reinforced with in-situ TiB2 particles

Significant Microstructure Refinement and Improved Mechanical Properties of Mg2Si/Al Composites Induced by Nanoscale TiB2 Particles

Enhancing High-Temperature Strength and Ductility of Γ-Tial Matrix Composites with Controllable Dual Alloy Structure

Remarkable Improvement in Strength and Ductility of Al-Cu Foundry Alloy by Submicron-Sized TiC Particles

Enhanced High Temperature Mechanical Properties and Heat Resistance of an Al–Cu–Mg–Fe–Ni Matrix Composite Reinforced with In-Situ TiB 2 Particles

In-situ Tailoring Microstructure by Directly Synthesized TiC–TiB2 Nanoparticles to Achieve Well-Balanced Strength and Ductility in Al–Cu Alloy

Processing, Multiscale Microstructure Refinement and Mechanical Property Enhancement of Hypoeutectic Al–Si Alloys Via in Situ Bimodal-Sized TiB2 Particles

Enhancement of the Strength-Ductility Synergy of Al-Si-Mg Alloys Via C-doped TiB2 Particles

Enhancing strength-ductility synergy in nano-sized TiB 2 /Al composite via rapid solidification and thermo-mechanical processing

Novel method to achieve synergetic strength–ductility improvement of Al–Cu alloy by in situ TiC–TiB2 particles via direct reaction synthesis

Simultaneously Increasing the High-Temperature Tensile Strength and Ductility of Nano-Sized TiCp Reinforced Al-Cu Matrix Composites

Acquiring Mg-Ag microalloying TiB 2 /Al-4.5Cu composite simultaneously with ultrahigh strength and ductility via optimized salt-metal reaction and multistage heat treatment

Enhancing Strength-Ductility Synergy and Mechanisms of Al-based Composites by Size-Tunable In-Situ TiB2 Particles with Specific Spatial Distribution

Microstructure and Mechanical Properties of In-Situ TiB2/AlSi7Mg Composite Via Powder Metallurgy and Hot Extrusion

In-Situ Synthesized a Dual-Scale Ti2alc Reinforced Tial Composites with Superior Mechanical Properties

In situ TiB2 particulate reinforced near eutectic Al–Si alloy composites

Optimizing Microstructure and Enhancing Mechanical Properties of Al–Si–Mg–Mn–based Alloy by Novel C-doped TiB2 Particles