Abstract:<p>A great challenge in producing TiC reinforced metal matrix composites is encountered to directly add TiC particles into molten steel during casting owing to floating of nano-sized TiC on molten steels and agglomeration. As such, this work proposes a novel strategy using pre-distribution in situ nano-sized TiC/Al master alloy to fabricate 45 steel matrix composites reinforced with trace nano-sized TiC particles while without changing the original casting process; this strategy can effectively avoid the aforementioned challenge. The average grain sizes of as-cast and heat-treated 45 steel with 0.018 wt% nano-sized TiC particles remarkably decrease from 14.75 μm to 9.51 μm respectively to 8.77 μm and 5.46 μm respectively, which is attributed to that the nanoparticles provide effective nucleation sites and inhibit grain growth. Furthermore, adding trace nano-sized TiC particles significantly enhances their strength and toughness. The 45 steel matrix composites reinforced with 0.054 wt% nano-sized TiC particles exhibits the best tensile mechanical properties with yield strength of 624 MPa, ultimate strength of 920 MPa, elongation of 23.8% and impact toughness of 50.21 J/cm<sup>2</sup>, which are 19.3%, 13%, 10.2% and 38% respectively higher than the 45 steel. The strengthening and toughening mechanisms of 45 steel by nano-sized TiC are attributed to grain boundary strengthening, work hardening and dispersion strengthening. The strategy proposed in this work may provide a promising method for enhancing steel performances for industrial productions.</p>

Simultaneously Increasing the High-Temperature Tensile Strength and Ductility of Nano-Sized TiCp Reinforced Al-Cu Matrix Composites

High Temperature Tensile Properties of in Situ TiBw/Ti6Al4V Composites with a Novel Network Reinforcement Architecture

Simultaneous Improvement in Strength and Ductility of TC4 Matrix Composites Reinforced with Ti1400 Alloy and In Situ-Synthesized TiC

Enhancing strength-ductility synergy in nano-sized TiB 2 /Al composite via rapid solidification and thermo-mechanical processing

Investigation of the mechanical properties of TiC particle-reinforced Al-Cu alloys: insights into interface precipitation mechanisms and strengthening effects

Microstructure and mechanical properties of aluminum alloy composites with endogenous nano-TiCp

In-situ TiC/Ti composites based on Ti 2 AlC–Ti system: Reaction process, microstructure, and mechanical properties

Grain Refinement and Mechanical Properties of Cu-Cr-Zr Alloys with Different Nano-Sized TiCp Addition.

Preparation, Microstructure and Mechanical Properties of In-Situ TiC/Al–Si–Fe Aluminum Matrix Composites

Superior strength-ductility combination in TiC/TC4 composites via In situ construction Ti 2 Cu nanoparticles

Hierarchically heterogeneous strategy for Ti 2 AlC/TiAl composite with superior mechanical properties

Pregabalin Treatment of Anxiety in Patients with Substance Use Disorders

Reaction mechanism and microstructure evolution of superhigh strength in-situ TiC/Ti composite based on Cr 2 AlC-Ti system

Simultaneously enhanced strength and toughness of cast medium carbon steels matrix composites by trace nano-sized TiC particles

Effect of temperature on mechanical behavior of Cu–Cr–Co–Ti alloys

Enhanced high temperature performance of two-scale network-structured (TiB+Ti5Si3)/TA15 composites by simultaneous adjustment of matrix and nano-scaled Ti5Si3

Study of the high-temperature mechanical properties of Al-6061/NiTi reinforced metal matrix composites

In-situ synthesized a dual-scale Ti 2 AlC reinforced TiAl composites with superior mechanical properties

Enhanced tensile properties in a Cu-Al2O3 alloy via trace Ti addition

Precipitation behavior and mechanical properties of Al-Zn-Mg-Cu matrix nanocomposites: Effects of SiC nanoparticles addition and heat treatment

Influence of TiCN addition on the microstructures and mechanical properties of the AZ31 alloy