Abstract:Geopolymers have been employed as a replacement material for cement in construction because they are better for the environment than are other replacement material options. In recent decades, externally bonded carbon fiber-reinforced polymer (CFRP) laminates have been used to strengthen or repair structures and improve their durability. The efficiency and reliability of a fiber-reinforced polymer (FRP) application depends significantly on the effectiveness of the bond between the FRP and the concrete substrate. This study examines the effect of the size of the coarse aggregate (5-10, 10-16, and 16-20 mm) on the bond between CFRP and metakaolin-based geopolymer (MKGP) concrete. The failure mode, failure load, distribution of strain along the bond length, maximum interfacial shear bond stress, effective bond length, local slip at the maximum interfacial shear bond stress, and bond-slip relationship between the CFRP sheet and the concrete substrate are investigated. Results show that the failure loads and maximum interfacial shear bond stress of MKGP specimens decreased with an increase in the size of the coarse aggregate, which can be attributed to the decreased splitting tensile strength of MKGP concrete with increasing size of the coarse aggregate. It was shown that this size affected the bond capacity between the CFRP and the concrete substrate and increased the effective bond length of ordinary Portland cement (OPC) and MKGP concrete by up to 24.5% and 46.8%, respectively. The average local slip between CFRP and MKGP concrete at the maximum interfacial shear bond stress increased with the size of the coarse aggregate, due to the decreased splitting tensile strength of MKGP concrete. Experimental results were used to recalibrate prevalent models used to calculate the effective bond length. Models to calculate the effective bond length are proposed that consider the influence of the coarse aggregate size. Popovics's equations were employed to develop a relationship between the local bond stress and local slip by incorporating the effect of the size of the coarse aggregate. The findings of this study may contribute to the tailoring of bond behavior between CFRP and geopolymer concrete for engineering applications.

Rate-Dependent Bonding of Steel Reinforcement in Geopolymer Concrete

Experimental Study on Dynamic Behavior of GFRP-to-concrete Interface

Dynamic Bond Behavior Of Gfrp Sheet-Concrete Interface Under Impact Loading

Influence of Coarse Aggregate Size on the Bonding Between CFRP Sheets and Metakaolin-Based Geopolymer Concrete and Ordinary Concrete

Experimental Investigation and Analysis of Bond–Slip Behavior between Geopolymer Concrete and Steel Tube with Varying Structural Measures

Compressive Strength and Chloride Resistance of Slag/Metakaolin-Based Ultra-High-Performance Geopolymer Concrete.

Bond Performance of Hook-End Steel Fiber to the Mortars Cured for 360 Days

Effect of Loading Rate on the Bonding Strength Between Rebar and Concrete

Bond performance of reinforcing bars in fly ash-based engineered geopolymer composites under uniform and nonuniform corrosion conditions

Experimental and numerical investigations on the bond-slip behavior of the interface between geopolymer concrete and steel tube

Mechanical Behaviors of Metakaolin-Based Foamed Geopolymer (MKFG) under Dynamics Loading

Dynamic tensile properties of geopolymer concrete and fibre reinforced geopolymer concrete

Temperature-Dependent Pullout Behavior of Geopolymer Concrete Reinforced with Polymer- or Mineral-Impregnated Carbon Fiber Composites: An Experimental and Numerical Study

Experimental Study on Bond Performance of Carbon- and Glass-Fiber Reinforced Polymer (CFRP/GFRP) Bars and Steel Strands to Concrete

Early performance and bonding mechanism of metakaolin (MK)- ground granulated blast furnace slag (GGBS) based geopolymer road repair mortar

Fracture Properties and Softening Curves of Steel Fiber-Reinforced Slag-Based Geopolymer Mortar and Concrete

Bond performance of GFRP bars embedded in steel‐PVA hybrid fiber concrete subjected to repeated loading

Durability study and mechanism analysis of red mud-coal metakaolin geopolymer concrete under a sulfate environment

Bonding Properties between Fly Ash/Slag-Based Engineering Geopolymer Composites and Concrete

Alkalinity and Its Consequences for the Performance of Steel-Reinforced Geopolymer Materials

Effect of Size of Coarse Aggregate on Mechanical Properties of Metakaolin-Based Geopolymer Concrete and Ordinary Concrete