Abstract:The compressive mechanical properties of concrete-based materials are strongly affected by the presence of additions in the mix and load application velocity. Fiber-Reinforced Rubberized Concrete (FRRC) was recently proposed in the literature as a concrete-based material with the aim of obtaining a ductile material with reduced environmental burden and characterized by excellent energy absorption performances during impact loading. FRRC joins and balances the advantages and drawbacks of Fiber Reinforce Concrete (FRC) and Rubberized Concrete (RuC). However, its behavior has rarely been investigated under dynamic loadings, although gaining sufficient knowledge on their high strain rate behavior is crucial for their full-scale application. This study aims to investigate the high-strain rate compressive behavior of FRRC with fine rubber aggregates and micro-straight steel fibers. Tests were performed using conventional quasi-static loading with a compressive testing machine and high-strain rate tests with a 080-mm Split Hopkinson Pressure Bar (SHPB) for strain rates up to 200 s(-1). The experimental program comprises the characterization of Plain Concrete (PC), FRC, RuC, and FRRC with a full test matrix (a total of 192 specimens) covering fiber contents up to 1.5% and rubber volume substitution ratios up to 30%. The micro-scale characterization of the material using SEM scans provided a complete understanding of the observed macro-scale behavior. A high-speed camera was used to capture the cracking development processes. The measurements both for quasi-static and dynamic tests indicate that the addition of fibers improves the ductility or toughness with a slight increase in the compressive strength and the substitution with rubber aggregates significantly reduces the compressive strength with improved ductility or toughness. The combination of fiber and rubber (FRRC) leads to a combination of the previously described single marginal effects. The dynamic tests reveal the marked strain rate dependency, although specimens with large rubber volume substitution were more sensitive to the strain rate effect within the considered test range. Based on the test data, data-driven models for strength reduction factor (SRF) and dynamic increase factor (DIF) are proposed for different types of FRRC. The image-based waveform discussion provides evidence of the "double-peak" phenomenon highlighting the different features of the observed signals and damage evolution. Ultimately, this study indicates that FRRC has an excellent high-strain rate compressive behavior and can be a promising material to be employed to protect structures against impact and blast loads.

Dynamic Bond Behavior Of Gfrp Sheet-Concrete Interface Under Impact Loading

Experimental Study on Dynamic Behavior of GFRP-to-concrete Interface

Experimental study on dynamic behavior of CFRP-to-steel interface

Dynamic Behavior of CFRP-Strengthened Reinforced Concrete Beams Without Stirrups under Impact Loading

Axial Impact Behavior of FRP-Confined Concrete Stub Columns with Square and Circular Cross Section

Tests for anti-shear failure mechanism of CFRP-strengthened RC Beams without Stirrups under impact loading

Impact Testing of Reinforced Concrete Beams Shear-Strengthened with Fiber-Reinforced Polymer Wraps

High-strain rate compressive behavior of Fiber-Reinforced Rubberized Concrete

Ultimate Strength of Reinforced Concrete Beams Retrofitted with Hybrid Bonded Fiber-Reinforced Polymer

Experimental and 3D Numerical Study on CFRP–Concrete Interface Under Dynamic Loading

Effect of Shear Resistance on Flexural Debonding Load-Carrying Capacity of RC Beams Strengthened with Externally Bonded FRP Composites

Bond behavior of the FRP grid-concrete interface with geopolymer mortar as an adhesive

EXPERIMENTAL STUDY ON BOND BEHAVIOR BETWEEN FRP PLATE AND CONCRETE WITH GRID SHEAR BOND

Experimental Study on Mechanical Properties of Interface between Basalt Fiber-Reinforced Polymer/Glass Fiber-Reinforced Polymer Composite Cement Plate and Concrete

Refined Modeling of the Interfacial Behavior Between FRP Bars and Concrete under Different Loading Rates

Experimental Study on Direct Shear Performance of Concrete-Concrete Interface of Prefabricated Structure Sleeve Grouting Connection

Experimental Investigation of Fatigue Debonding Growth in FRP–Concrete Interface

The Bond-Slip Relationship at FRP-to-Brick Interfaces under Dynamic Loading

Fracturing behaviors of FRP-strengthened concrete structures

Study on bonding behavior of FRP grid-ECC composite layer and concrete with quantitative interface treatment

Experimental study on the fatigue bond behavior of concrete beams reinforced with hybrid fiber‐reinforced polymer and steel bars