Abstract:For robotic polishing of curved surfaces with compliant polishing disc, it is critical to accurately control the tilt angle of the polishing disc and normal contact force between the disc and the workpiece surface simultaneously. As conventional industrial robots lack force control capability, a 3-DOF two-rotational-one-translational (2R1T) force-controlled end-effector based on the 3-PPS parallel mechanism is developed for robotic polishing. During the polishing process, the changes of the tilt angle of the end-effector's moving platform will result in displacement variations of the contact point, owing to the inherent parasitic motion of the end-effector module, the geometry of the disc, and the compliance of the disc. Without proper compensation of the displacement variation, the control accuracy of contact force will be significantly decreased. To tackle this problem, a parametric model is established to predict the contact point variation. A hybrid orientation/force control architecture with compensation of the contact point variation is proposed. Based on the kinematic analysis, orientation control is achieved through a position controller. The force tracking control considering the uncertainty of the environment is achieved through an admittance controller. By introducing the contact point compensation model into the control architecture, the control accuracy of the contact force is significantly improved. The proposed control architecture is evaluated on a macro-mini manipulator consisting of a 6-DOF industrial robot and the 2R1T force-controlled end-effector. The experimental results indicate that the orientation control is accurate and the mean force errors with three different kinds of tilt angle references are reduced by 78.9 , 81.1 and 72.3 compared to the conventional hybrid orientation/force control, respectively, which validate the effectiveness of the proposed control method.

Kinematic Design of a 3-DOF Force-controlled End-effector with Flexure Joints for Robotic Finishing Applications

Dynamic Modeling and Analysis for Coupling Processing 6-DOF 3 P3 R Manipulator

A Novel Flexure-Based 3-DOF Micro-Parallel Manipulator with a Gripper for Micro/nano Manipulation

Design and Kinematic Analysis of a Flexible-Link Parallel Mechanism With a Spatially Quasi-Translational End Effector

Design, modeling, analysis and testing of a novel piezo-actuated XY compliant mechanism for large workspace nano-positioning

Design and Analysis of a Precision Multi-DOF Placement Device

Development of a redundant anthropomorphic hydraulically actuated manipulator with a roll-pitch-yaw spherical wrist

Design and Optimization of Electromagnetically Driven End-Effector

Design And Modeling Of A Hydraulic Soft Actuator With Three Degrees Of Freedom

Design and Simulation of a 3-DOF Dexterous Joint Actuator Based on Multi-Drive Hierarchical Output and Spherical Rotation Mechanism

Hybrid orientation/force control for robotic polishing with a 2R1T force-controlled end-effector

Kinematic and dynamic analysis of a 3-DOF parallel mechanism

Kinematic Modeling and Performance Analysis of a 5-DoF Robot for Welding Applications

Design of a spatial constant-force end-effector for polishing/deburring operations

Design of a 3-Axis Articulated Tool Head with Parallel Kinematics Achieving Desired Motion/force Transmission

Kinematic optimal design of a 2-degree-of-freedom 3-parallelogram planar parallel manipulator

Kinematics analysis and workspace optimization for a 4-DOF 3T1R parallel manipulator

Design of a novel 3-DoF parallel kinematic mechanism: type synthesis and kinematic optimization.

Optimum Design For A Micromanipulation End-Effector Based On Flexure Hinge

Kinematic analysis of a flexible six-DOF parallel mechanism

Analysis and design of spatial compliant mechanisms using a 3-D dynamic stiffness model