Abstract:Polymer acceptors based on the polymerization of small-molecule acceptor (PSMAs) have developed rapidly in recent years. All-polymer solar cells (all-PSCs) composed of PSMAs and polymer donors not only retain the excellent mechanical properties, but also have better morphological properties than traditional polymer acceptors such as N2200. However, since PSMAs are generally not highly polymerized, their electron mobilities are generally lower than the hole mobilities of the high-molecular-weight polymer donors they are used with. In this work, we apply the sequential processing (SqP) method and use toluene as the processing solvent to prepare PSMA-based all-PSCs, which effectively improves the electron mobility and shows much higher efficiency (15.8%) than the SqP device prepared from chloroform (13.9%) – the conventional solvent used for high-performance PSMAs. Not only that, the efficiency of the toluene-processed SqP device is also higher than that of the device prepared by the traditional blending-casting (BC) method (14.2%). In addition, for the first time, we reveal the film formation process of all-polymer active layers prepared by the SqP method using the in situ UV-Vis absorption technique, and investigate the vertical phase separation and the rate of exciton generation across the device using film-depth-dependent absorption spectroscopy, which systematically explained the effect of increased mobility on device parameters. This methodology is applied in two different all-polymer systems, namely, PM6:PYF-T- o and PM6:PY-IT, and both systems manifest the same conclusion.

Achieving Optimal Bulk Heterojunction in All-Polymer Solar Cells by Sequential Processing with Nonorthogonal Solvents.

Efficient All-Polymer Solar Cells with Sequentially Processed Active Layers

Over 16% efficiency all-polymer solar cells by sequential deposition

An Improved Performance of All Polymer Solar Cells enabled by Sequential Processing via Non-halogenated Solvents

High Efficiency Layer‐by‐Layer All‐Polymer Solar Cell Enabled by Bottom‐Layer Optimization

Manipulating Polymer Backbone Configuration via Halogenated Asymmetric End-Groups Enables Over 18% Efficiency All-Polymer Solar Cells

High performance all-polymer solar cells enabled with solvent and solid dual additives

Optimizing the Morphology of All-Polymer Solar Cells for Enhanced Photovoltaic Performance and Thermal Stability

Nonhalogenated‐Solvent‐Processed High‐Performance All‐Polymer Solar Cell with Efficiency over 14%

Efficient Non-Halogenated Solvent Processed Ternary All-Polymer Solar Cells with A Favorable Morphology Enabled by Two Well-Compatible Donors.

Improving Photovoltaic Parameters of All-Polymer Solar Cells Through Integrating Two Polymeric Donors

High Performance All-Polymer Solar Cells by Synergistic Effects of Fine-Tuned Crystallinity and Solvent Annealing.

In‐situ study the dynamics of blade‐coated all‐polymer bulk heterojunction formation and impact on photovoltaic performance of solar cells

Improving Performance of All‐Polymer Solar Cells Through Backbone Engineering of Both Donors and Acceptors

Ternary All‐Polymer Solar Cells with Efficiency up to 18.14% Employing a Two‐Step Sequential Deposition

Optimizing the power conversion processes in diluted donor/acceptor heterojunctions towards 19.4% efficiency all-polymer solar cells

Tuning polymer-backbone coplanarity and conformational order to achieve high-performance printed all-polymer solar cells

Sequentially Deposited Active Layer with Bulk-Heterojunction-like Morphology for Efficient Conventional and Inverted All-Polymer Solar Cells

High‐Efficiency P3HT‐Based All‐Polymer Solar Cells with a Thermodynamically Miscible Polymer Acceptor

Siloxane-Terminated Side Chain Engineering of Acceptor Polymers Leading to over 7% Power Conversion Efficiencies in All-Polymer Solar Cells.

Versatile Sequential Casting Processing for Highly Efficient and Stable Binary Organic Photovoltaics.