Abstract:With the demonstration of small-area, single-junction polymer solar cells (PSCs) with power conversion efficiencies (PCEs) over the 10% performance milestone, the manufacturing of high-performance large-area PSC modules is becoming the most critical issue for commercial applications. However, materials and processes that are optimized for fabricating small-area devices may not be applicable for the production of high-performance large-area PSC modules. One of the challenges is to develop new conductive interfacial materials that can be easily processed with a wide range of thicknesses without significantly affecting the performance of the PSCs. Toward this goal, we report two novel naphthalene diimide-based, self-doped, n-type water/alcohol-soluble conjugated polymers (WSCPs) that can be processed with a broad thickness range of 5 to 100 nm as efficient electron transporting layers (ETLs) for high-performance PSCs. Space charge limited current and electron spin resonance spectroscopy studies confirm that the presence of amine or ammonium bromide groups on the side chains of the WSCP can n-dope PC71BM at the bulk heterojunction (BHJ)/ETL interface, which improves the electron extraction properties at the cathode. In addition, both amino functional groups can induce self-doping to the WSCPs, although by different doping mechanisms, which leads to highly conductive ETLs with reduced ohmic loss for electron transport and extraction. Ultimately, PSCs based on the self-doped WSCP ETLs exhibit significantly improved device performance, yielding PCEs as high as 9.7% and 10.11% for PTB7-Th/PC71BM and PffBT4T-2OD/PC71BM systems, respectively. More importantly, with PffBT4T-2OD/PC71BM BHJ as an active layer, a prominent PCE of over 8% was achieved even when a thick ETL of 100 nm was used. To the best of our knowledge, this is the highest efficiency demonstrated for PSCs with a thick interlayer and light-harvesting layer, which are important criteria for eventually making organic photovoltaic modules based on roll-to-roll coating processes.

Sequentially Deposited Active Layer with Bulk-Heterojunction-like Morphology for Efficient Conventional and Inverted All-Polymer Solar Cells

Over 16% efficiency all-polymer solar cells by sequential deposition

Layer‐by‐Layer All‐Polymer Solar Cells Approaching 19% with Dual‐Donor Modulation of an Interpenetrating Network

High Efficiency Layer‐by‐Layer All‐Polymer Solar Cell Enabled by Bottom‐Layer Optimization

Orthogonal solvent-sequential deposition of nonfullerene acceptor solution on polymer donor film: complete interpenetration and highly efficient inverted organic solar cells

Efficient All-Polymer Solar Cells with Sequentially Processed Active Layers

Effective Regulation of Morphologies and Exciton‐Generation Process Enables Quasi‐Planar All‐Polymer Organic Solar Cells Exceed 18% Efficiency

Layer-by-layer processed binary all-polymer solar cells with efficiency over 16% enabled by finely optimized morphology

Layer‐by‐Layer‐Processed Ternary All‐polymer Organic Solar Cells with 17.74% Efficiency Enabled by introducing a designed narrow‐bandgap guest polymer acceptor

Ternary All‐Polymer Solar Cells with Efficiency up to 18.14% Employing a Two‐Step Sequential Deposition

Sequentially N‐Doped Acceptor Primer Layer Facilitates Electron Collection of Inverted Non‐Fullerene Organic Solar Cells

Bulk Heterojunction or Layer‐by‐Layer Structure PM6:L8‐BO Based Polymer Solar Cells Exhibiting an Efficiency of 17.84 % or 18.43 %

Single Junction Inverted Polymer Solar Cell Reaching Power Conversion Efficiency 10.31% by Employing Dual-Doped Zinc Oxide Nano-Film As Cathode Interlayer

High-performance inverted polymer solar cells: Device characterization, optical modeling, and hole-transporting modifications

An Improved Performance of All Polymer Solar Cells enabled by Sequential Processing via Non-halogenated Solvents

High‐Efficiency Binary Organic Solar Cells Enabled by Pseudo‐Bilayer Configuration in Dilute Solution

Physically Adsorbed Fullerene Layer on Positively Charged Sites on Zinc Oxide Cathode Affords Efficiency Enhancement in Inverted Polymer Solar Cell.

n-Type Water/Alcohol-Soluble Naphthalene Diimide-Based Conjugated Polymers for High-Performance Polymer Solar Cells

Achieving 15.81% and 15.29% Efficiency of All-Polymer Solar Cells Based on Layer-by-layer and Bulk Heterojunction Structures

Naphthalene diimide-based random terpolymers with axisymmetric and asymmetric electron acceptors for controllable morphology and enhanced fill factors in all-polymer solar cells

Semi‐Transparent Organic Photovoltaics: Sequential Deposition of Donor and Acceptor Provides High‐Performance Semitransparent Organic Photovoltaics Having a Pseudo p–i–n Active Layer Structure (Adv. Energy Mater. 13/2021)