Abstract:In order to investigate the ignition characteristic of ethylene combustion at low-to-medium temperature, contemporary detailed kinetic mechanisms for ethylene combustion, including AramcoMech_1.3 mechanism, Creck mechanism, Glarborg's mechanism, San Diego (UCSD) mechanism and Wang's mechanism, were used to simulate ignition delay times of ethylene combustion by Chemkin Pro software reflected shock tube model and closed homogeneous reactor under the assumption of constant-volume, homogeneous and adiabatic conditions. Simulated ignition delay times of ethylene combustion using these mechanisms disagree with the experimental data from literatures at low-to-medium temperature.Sensitivity analysis was carried out to identify the controlling steps of C2H4 ignition at 800 similar to 1300 K. The sensitivity of ignition delay time was calculated by the formula Sensitivity=[tau(ign)(2k(i))-tau(ign)(k(i))]/tau(ign)(k(i))x100%. Here tau(ign)(k(i)) is ignition delay time based on the original combustion mechanism, tau(ign)(2k(i)) is ignition delay time simulated using this mechanism in which the rate constant of reaction i is doubled through multiplying the pre-exponential factor of reaction i by 2. It was demonstrated that C2H3+O-2=CH2CHO+O(R1), C2H3+O-2=CH2O+HCO(R2) have great sensitivity to the ignition of C2H4 over a wide temperature range, while those reactions involved HO2 (including H-2-O-2 and C2H4+HO2 system) are important for C2H4 ignition process at low temperature.By modifying these rate constants of R1 and R2 with more accurate calculated results and adding C2H3+O-2=C2H3OO reaction and those reactions involved C2H4+HO2 system, one revised mechanism (UCSD-R2) was obtained. UCSD-R2 mechanism can produce better agreement with recent ethylene ignition delay time experimental data from literatures at low-to-medium temperature compared with UCSD mechanism.When UCSD-R2 mechanism was adopted to simulate the ignition delay time of ethylene combustion, the first stage ignition delay time at low temperature (800 similar to 950 K) and negative temperature coefficient at medium temperature (950 similar to 1100 K) were found. They were explained by using sensitivity analysis and rate-of-production analysis. The method of rate-of-production analysis can be employed to calculate the contribution of each reaction to the production and consumption of every species or to calculate total rate-of-production of every species, by Chemkin Pro software closed homogeneous reactor under the assumption of constant-volume, homogeneous and adiabatic conditions. It was demonstrated that C2H4+HO2 system can shorten the ignition delay time obviously, the production and consumption of HO2 radical play a significant role for first stage ignition of C2H4 at low temperature, the consumption of C2H3 radical results in the negative temperature coefficient at medium temperature.

A Shock Tube Study of Ethylene/Air Ignition Characteristics over a Wide Temperature Range

An Experimental and Modeling Study of Ethylene-Air Combustion over a Wide Temperature Range

Investigations of Chemical Kinetic Mechanisms for Low-to-medium Temperature Ignition of Ethylene

Study of N-Butylcyclohexane/air Ignition over a Broad Range of Temperatures in Shock Tube

Shock Tube Measurement of Ethylene Ignition Delay Time and Molecular Collision Theory Analysis

Shock tube experiments and numerical study on ignition delay times of ethane in super lean and ultra-lean combustion

A Shock Tube Study of N-Undecane/Air Ignition Delays over A Wide Range of Temperatures

Shock Tube Study of N-Nonane/air Ignition over a Wide Range of Temperatures

Autoignition of Iso-Octane at Ultra-Lean and Lean Conditions

Ethylene Oxidation Experimental Study and Kinetic Mechanism Analysis Based on Shock Tube

Experimental and Kinetic Study on Ignition Delay Times of Dimethyl Ether at High Temperatures

Investigation of the Ignition Temperature of Ethane-Air Mixtures at Elevated Pressure

Shock-tube measurements of ignition delay times for the ethane/dimethyl ether blends

Shock-Tube Study on Ethylcyclohexane Ignition

An Experimental Investigation of Ethylene/o2/diluent Mixtures: Laminar Flame Speeds with Preheat and Ignition Delays at High Pressures

Ignition Delay Times of Ethane under O2/CO2 Atmosphere at Different Pressures by Shock Tube and Simulation Methods

Shock-Tube Study of Dimethoxymethane Ignition at High Temperatures

Experimental Study on Ethane Ignition Delay Times and Evaluation of Chemical Kinetic Models

Experimental And Kinetic Studies On Ignition Delay Times Of Dimethyl Ether/N-Butane/O-2/Ar Mixtures

A Shock Tube Study of Ignition Delay Times in Diluted Methane, Ethylene, Propene and Their Blends at Elevated Pressures

Shock Tube and Kinetic Study of C2H6/H2/O2/Ar Mixtures at Elevated Pressures