Abstract:The article proposes three lumped-distributed resonators, each of which introduces two transmission zeros (TZ) at real frequencies into the transfer function of inline bandpass filter (BPF). The use of such resonators in mixed-coupled BPFs without cross-coupling increases the number of TZs from ( $N + 1$ ) to (3 $N + 1$ ). It improves the filter performance. Lumped-distributed resonators represent a stepped-impedance or uniform transmission line segment to which one capacitance or inductance is connected in cascade. These resonators have two antiresonant frequencies $\omega _{p1}$ , $\omega _{p2}$ , which are placed next to the main resonant frequency $\omega _{0}$ , which leads to two TZs. Antiresonant frequencies $\omega _{p1}$ , $\omega _{p2}$ are the poles of the input admittance $Y(j\omega )$ , their position is controlled by the parameters of the resonators. Lumped-distributed resonators can form equidistant TZ pairs, including those of higher degree, allowing the implementation of BPFs with quasielliptic frequency responses and improved selectivity. It has been established that reducing Q-factors of inductor $Q_{L}$ and capacitor $Q_{C}$ do not increase the insertion loss in the passband of BPF. A design method for BPF with mixed couplings between adjacent resonators is established. It is also suitable for filters that use the proposed resonators. As result, the TZ number of such BPFs is increased from ( $N$ $+$ 1) to (3 $N + 1$ ).

Realization of Multiple Transmission Zeroes for Bandpass Filters with Simple Inline Topology.

Compact Quasi-Elliptic Response Wideband Bandpass Filter With Four Transmission Zeros

DUAL-MODE BPF WITH FOUR TRANSMISSION ZEROS USING S-L COUPLING STRUCTURE WITH QUADRATIC FUNCTION COUPLING COEFFICIENT

Individually Controllable Dual-Band Bandpass Filter with Multiple Transmission Zeros and Wide Stopband

Design of Miniaturized Dual-Band Low-Pass–Bandpass and Bandpass Filters

Compact Dual‐layer Substrate‐integrated Waveguide Bandpass Filters with Controllable Transmission Zeros

Lumped-Distributed Resonators Providing Multiple Transmission Zeros in Bandpass Filters With Simple and Mixed Couplings

QUASI-ELLIPTIC WIDEBAND BANDPASS FILTERS USING STUBS LOADED ANTI-PARALLEL COUPLED-LINE

High Selectivity Fifth-Order Wideband Bandpass Filters with Multiple Transmission Zeros Based on Transversal Signal-Interaction Concepts

Design of Novel Compact SISL Filters with Multiple TZs Based on Patch Resonators

Compact Tunable Dual/tri-Band Bandpass Filters with Multiple Zeros

Miniaturized Tri-Band Bandpass Filter Design Using Quarter-Wavelength Shunted-Line Stepped-Impedance Resonators (slsirs) with Multi-Transmission Zeros

Miniaturized Two-Pole Lumped BPF with Four Controllable TZs Using Multiple Coupling Paths

Compact Multiband Bandpass Filter Using Low-Pass Filter Combined with Open Stub-Loaded Shorted Stub

Dual-Band Bandpass Filter With Controllable Stopband Bandwidth

Compact Octa-band Bandpass Filter Based on Controllable Transmission Zeros with Wide Upper Stopband

A W-Band Bandpass Filter with Dual Behavior Resonators Fabricated by Additive Manufacturing

High-selectivity single-ended and balanced bandpass filters using ring resonators and coupled lines loaded with multiple stubs

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

Super High-Selectivity Fifth-Order Bandpass Filter with Twelve Transmission Zeros

Bandpass Filter Using Dual Series-Cascaded Ring Resonators with Multiple Transmission Zeros