Abstract:Despite the fact that a stand-alone ideal heat-integrated distillation column (ideal HIDiC) can be thermodynamically efficient and operationally stable, the application of an ideal HIDiC system to separate a close-boiling multi-component mixture is still a challenging problem because of the possibility of strong interactions within/between the ideal HIDiCs involved. In this work, employment of two ideal HIDiCs to separate a close-boiling ternary mixture is studied in terms of static and dynamic performance. It is found that the ideal HIDiC system can be a competitive alternative with a substantial energy saving and comparable dynamic performance in comparison with its conventional counterpart. The direct sequence appears to be superior to the indirect sequence due to the relatively small vapor flow rates to the compressors. Controlling the bottom composition of the first ideal HIDiC with the pressure elevation from the stripping section to the rectifying section helps to suppress the disturbances from the feed to the second ideal HIDiC. Special caution should, however, be taken when the latent heat of the distillates is to be recovered within/between the ideal HIDiCs involved, because a positive feedback mechanism may be formed and give rise to additional difficulties in process operation.

Development of a partially accurate model and application to a reduced-order control scheme for heat integrated distillation column

Development of Extended Generic Model Control for High-Purity Heat Integrated Distillation Column Using Online Concentration Estimation

Dynamics and Control of High Purity Heat Integrated Distillation Columns

Nonlinear-Model-Based Control of a Heat Integrated Distillation Column Using Model Updating Based on Distributed Wave Velocity

Temperature profile movement investigation and application to a control scheme with corrected set-point for a heat integrated distillation column

Dynamics and Control Designs for Internal Thermally Coupled Distillation Columns with Different Purities, Part 2: Close Loop Analysis and Control Designs

Design and control of an ideal heat-integrated distillation column (ideal HIDiC) system separating a close-boiling ternary mixture

Dynamic Behaviours and Control of Full Tower Heat Integrated Air Separation Columns

Experience-based Identification and Model Predictive Control for a Methanol Recovery Distillation Column

Modeling, Control, and Optimization of Ideal Internal Thermally Coupled Distillation Columns

Estimation of Time-Dependent Parameters of a Heat-Integrated Distillation Column System

Adaptive Temperature Control for Distillation Columns Based on Relative Stability in the Profile Pattern

Control Schemes of Internal Thermally Coupled Distillation Columns for Non-Ideal Mixtures

Implementation Of Advanced Control For A Heat-Integrated Distillation Column System

Model Predictive Control of a High‐Purity Internal Thermally Coupled Distillation Column

Adaptive Model Predictive Control Scheme for Partially Internal Thermally Coupled Air Separation Column

Global Modeling of Heat-Integrated Distillation Column Based on Limited Local Measurements

Internal Model Control of Internal Thermally Coupled Air Separation Column

An Advanced Control of Heat Integrated Air Separation Column Based on Simplified Wave Model

Empirical Modelling and Advanced Control of an Industrial Distillation Column

Nonlinear dynamic behaviors and control based on simulation of high-purity heat integrated air separation column.