Abstract:The practicality of non-contact detection of explosive vapors has always faced challenges in miniaturization, sensitivity, and stability. A distributed-feedback (DFB) grating coated with a widely available polyfluorene film has been reported to show improved sensitivity but by the use of high-power pulses from large volume equipment. Here, our study introduces a promising portable design of a DFB sensor that can be pumped by a continuous wave (CW) laser diode to achieve the resonant enhancement effect of fluorescence, and the pump power can be as low as a few milliwatts but still high sensitivity and stability for trace explosive vapor detection can be generated. Moreover, both COMSOL simulations and experiments were conducted to study the influence of the sensor structure on the resonant enhancement and sensing performance. The results evidence that the explosive vapor quenching efficiency of the DFB grating sensor is obviously affected by the grating groove depth and the polyfluorene film thickness, and the highest quenching efficiency can reach 98.3% at 60 s when the average thickness of the polyfluorene film is 20 nm and the grating groove depth is 200 nm. The sensitivity and stability of DFB grating sensors were greatly improved compared with those of the conventional planar substrate sensors, and the signal-to-noise ratio of detection was improved by one order of magnitude. The reusable corrosion-resistant quartz grating, longer luminescence lifetime and low pump-power laser diode will greatly cut the cost of the DFB grating sensor, improve the integration of a detector, and make its application in portable chemical sensor products possible. The practicality of non-contact detection of explosive vapors has always faced challenges in miniaturization, sensitivity, and stability.

Optofluidic laser explosive sensor with ultralow detection limit and large dynamic range using donor-acceptor-donor organic dye

Donor-Acceptor-Donor Organic Dye Based Optofluidic Laser For Sensitive Explosive Detection With A Large Dynamic Range

Coiled Optical Nanofiber for Optofluidic Absorbance Detection.

Ultra-Sensitive Nanofiber Fluorescence Detection In A Microfluidic Chip

Enzyme Catalyzed Optofluidic Biolaser for Sensitive Ion Concentration Detection

Dual optofluidic distributed feedback dye lasers for multiplexed biosensing applications

Distributed Fibre Optofluidic Laser for Chip-Scale Arrayed Biochemical Sensing

A microfluidic device using a green organic light emitting diode as an integrated excitation source.

Donor-acceptor-donor fluorene derivatives for two-photon fluorescence lysosomal imaging.

A Multicolor Microfluidic Droplet Dye Laser with Single Mode Emission

Direct Detection of Dilute Solid Chemicals with Responsive Lateral Organic Diodes

Optofluidic catalytic laser for sensitive ion detection

Fluorescent chemo sensors based on “dually smart” optical micro/nano waveguides lithographically fabricated with AIE composite resins

Recent Advances in Optofluidic Laser for Biochemical Sensing

Sub-molecular-layer Level Protein Detection Using Disposable Fiber Optofluidic Laser

A Sequentially Bioconjugated Optofluidic Laser for Wash-out-free and Rapid Biomolecular Detection.

Reproducible fiber optofluidic laser for disposable and array applications.

A Distributed-Feedback Grating Excited by a CW Laser Diode for Portable Detection of Explosive Vapors with High Sensitivity and Stability

Laser-induced Fluorescence Detection System for Microfluidic Chips Based on an Orthogonal Optical Arrangement.

An integrated, optofluidic system with aligned optical waveguides, microlenses, and coupling prisms for fluorescence sensing

High-sensitivity, disposable lab-on-a-chip with thin-film organic electronics for fluorescence detection