Abstract:Sodium silicate and promoters have been widely used as supplementary cementing materials substituting ordinary Portland cement to improve the properties of stabilized soils. In this paper, the developments of mechanical properties of specimens stabilized with cement-based stabilizer, which consists of cement, sodium silicate and composite promoter, is investigated by unconfined compressive strength (UCS) test and scanning electron microscope (SEM). The failure strain and secant modulus are also obtained in UCS tests. The test results indicate that the supplementary cementing materials perform effectively pozzolanic reactions and improve the mechanical properties of cement stabilized clay. The contribution of pozzolanic effect is regarded akin as an addition of cement and the total cement content is the summation of cement content and equivalent cement content of the supplementary cementing materials. According to this premise, the clay-water/cement ratio hypothesis for stabilized clay is proposed for analyzing and assessing the development of the mechanical properties. The phenomenological models for predicting the compressive strength and secant modulus of specimens stabilized with the selected cement-based stabilizer are developed and verified. The comparison of predicted results and laboratory results indicates that the deviation is mostly within 10%. The microstructural analysis observes the changes of cementitious products in stabilized clays and confirms the pozzolanic effect of the supplementary cementing materials. On account of the efficiently pozzolanic effect, the addition of sodium silicate (<2%) and composite promoter (<4%) can be equivalent to several times cement content. Hence, the economic and environmental mix design is developed with the addition of the supplementary cementing materials. (C) 2014 Elsevier Ltd. All rights reserved.

Effect of salt on strength development of marine soft clay stabilized with cement-based composites

Interactive Influence of Water and Fines Contents on the Strength of Compacted Cement-Stabilized Clayey Sands: Insights and Predictive Framework

Fundamental Mechanical Behavior of CMMOSC-S-C Composite Stabilized Marine Soft Clay

Stabilization Nature and Unified Strength Characterization for Cement-Based Stabilized Soils

A Novel Strength Model for Cement Marine Clay Based on the Mechanical-Chemical Coupling Behavior

Effect of Salinity on Strength Behavior of Cement-treated Dredged Clay at High Initial Water Contents

Effects of Cyclic Seawater Exposure on the Mechanical Performance and Chloride Penetration of Calcium Sulfoaluminate Concrete

Mechanical characteristic and microstructure of salt-rich cement soil

Experimental Study on Soft Clay Stabilized with Cement-Based Stabilizer

Analysis of Strength Development in Soft Clay Stabilized with Cement-Based Stabilizer

Influence of Sodium Silicate and Promoters on Unconfined Compressive Strength of Portland Cement-Stabilized Clay

Chloride Ingress Profiles and Binding Capacity of Mortar in Cyclic Drying-Wetting Salt Fog Environments

Effect of modified supplementary cementitious material on performance of mortar and concrete in marine environment

Meso-scale Mechanical Deterioration of Mortar Due to Sodium Chloride Attack

Degradation effect of seawater on the long-term dynamic behavior of artificially cemented sand

Experimental Study on Mechanical Properties of Soft Clay Stabilized by Industrial By-Products

Early Strength-Promoting Mechanism of Inorganic Salts on Limestone-Calcined Clay Cement

Study of the Effects of Fine Coral Powder and Salinity on the Mechanical Behaviour of Coral Sand-Seawater Cement Mortar

Distinguishing the effects of cementation versus density on the mechanical behavior of cement-based stabilized clays

Unconfined Compressive Strength of Cement-Stabilized Qiantang River Silty Clay

Study on the chloride ion binding rate of sulfoaluminate cement mortars containing different mineral admixtures