Abstract:Reducing cement consumption by reutilizing solid wastes in soil stabilization and eliminating the residual by-product of cement hydration as much as possible could effectively improve the mechanical performance and economic benefits of problematic soils in underground engineering practices. This study employed red mud and phosphogypsum as additives to improve the engineering performance of cemented silty sands. A series of chemical, mechanical, and microstructural tests were conducted to investigate the optional mixing ratio of red mud and phosphogypsum to replace cement in silty sand stabilization, the strength improvement of silty sand with different total dosages of the composite binder (the mixture of cement, red mud, and phosphogypsum), the ratios of water to the composite binder, and curing ages compared with that stabilized with only ordinary Portland cement, and their mechanical performance enhancement mechanism. The results show that red mud and phosphogypsum could replace about 1/3 of cement consumption to the maximum in soil stabilization. The optional mixing ratio of cement: red mud: phosphogypsum for silty sand stabilization was 16:7:1. Compared with pure cement-stabilized silty sands, the silty sand stabilized with the composite binder achieved a superior mechanical performance at the initial age but a relatively slow increase over the curing age when the binder consumption was the same. The tensile and shear strength of silty sands stabilized with the composite binder were similar to that of only cement. The gradually disappeared calcium hydroxide and the downsized pores illustrated in microstructural observation implied that adding red mud and phosphogypsum in silty sand stabilization could not only compact the internal structure of the soil but also make up the defects of drying shrinkage and shrinkage cracking induced by the by-products of cement hydration. The results of this study can provide a reference for the resourceful utilization of red mud and phosphogypsum and for saving cement consumption in engineering practices.

Influence of Sodium Silicate and Promoters on Unconfined Compressive Strength of Portland Cement-Stabilized Clay

Study on Mixing Cement-Waste By-Product to Stabilize Soft Marine Clay

Stabilization Nature and Unified Strength Characterization for Cement-Based Stabilized Soils

Fundamental Mechanical Behavior of CMMOSC-S-C Composite Stabilized Marine Soft Clay

Understanding the Role of Calcium Silicate Slag in Sodium Carbonate-Activated Green Materials: Influence on Kinetics, Strength, and Efflorescence

Study on Mechanism of Muddy Soil Stabilization

Experimental Study on Mechanical Properties of Soft Clay Stabilized by Industrial By-Products

Unconfined Compressive Strength of Cement-Stabilized Qiantang River Silty Clay

Stabilization/solidification characteristics of organic clay contaminated by lead when using cement.

Distinguishing the effects of cementation versus density on the mechanical behavior of cement-based stabilized clays

Strength Characteristics and Microstructure of Cement Stabilized Soft Soil Admixed with Silica Fume

Influence of C–S–H seed and sodium sulfate on the hydration and strength of limestone calcined clay cement

Optimization of synergy between cement, slag, and phosphogypsum for marine soft clay solidification

TISSUE MICROPROCESSING

The Synergistic Effect of Calcained Coal-Series Kaolinite and Limestone on the Hydration of Portland Cement

Interaction between cement clinker constituents and clay minerals and their influence on the strength of cement-based stabilized soft clay

Experimental Investigation of Unconfined Compression Strength and Microstructure Characteristics of Slag and Fly Ash-Based Geopolymer Stabilized Riverside Soft Soil

Microstructural phase evolution and strength development of low-lime calcium silicate cement (CSC) paste incorporating ordinary Portland cement under an accelerated carbonation curing environment

Strength performance and enhancement mechanism of silty sands stabilized with cement, red mud, and phosphogypsum

The Design of a Novel Alkali-Activated Binder for Solidifying Silty Soft Clay and the Study of Its Solidification Mechanism

The influence of two types of alkali activators on the microstructure and performance of supersulfated cement concrete: mitigating the strength and carbonation resistance