Abstract:LMR sensor become alternative sensors that can replace SPR biosensors. Through a computational approach, obtaining an LMR sensor is succeeded with better sensitivity reaching 72.13°/RIU and wider detection range ranging from 1.331 to 1.401. In this refractive index range, the sensor shows excellent signal stability where the reduction in resonance dip depth is only ≈ 6%. Until now, Surface Plasmon Resonance (SPR) biosensors still rely on gold as their transducer element, and this makes cheap analytical devices difficult to achieve. On the other hand, lossy mode resonance (LMR) sensors offer transducers with more alternative materials due to their flexibility, which can be excited in p‐ and s‐polarized light. In this research it is carried out a numerical investigation using the transfer matrix method on LMR sensor composed of molybdenum disulfide (MoS2) as lossy layer and Cytop as matching layer. The reflectance curves for different thicknesses of MoS2 and Cytop are numerically investigated. The results obtained show that the chip consisting of 250 nm Cytop and 4 layers of MoS2 has a penetration depth 3 times higher than conventional SPR chips. If sensors with two types of polarization are compared, sensors with s‐polarized light have shown higher sensitivity reaching 72.13°/RIU with a wider dynamic range starting from a refractive index of 1.331 to 1.401. In this refractive index range, this sensor has displayed good signal stability where the reduction in resonance dip depth is only ≈6%. These computational results make the proposed structure very promising to be applied in the quantification of biological materials.

Temperature Sensor of MoS2 Based on Hybrid Plasmonic Waveguides

Ultrasensitive and Multifunction Plasmonic Temperature Sensor with Ethanol-Sealed Asymmetric Ellipse Resonators

A Sensitive Bi-Reflection Surface Plasmon Resonance Waveguide Sensor Based On Sion

Advancing Sensitivity in Guided-Wave Surface Plasmon Resonance Sensor through Integration of 2D BlueP/MoS2 Hybrid Layers

Optical Temperature Sensor Based on Polysilicon Waveguides

Tunable temperature sensor based on an integrated plasmonic grating

Sense High Refractive Index Sensitivity with Bragg Grating and MIM Nanocavity

Novel High-Sensitivity Racetrack Surface Plasmon Resonance Sensor Modified By Graphene

Orthogonal mode couplers for plasmonic chip based on metal–insulator–metal waveguide for temperature sensing application

SPR Dual-Parameter Sensor With Ag/MoS2 Composite Film for Refractive Index Detection in High-Temperature Environment

Metal-Insulator-Metal Plasmonic Sensor Utilizing Grating-Defect Waveguide and Cavities for Temperature Sensing and Biological Applications

Hybrid magneto-plasmonic structure consisting of hexagonal periodic nanodisks array with giant transverse magneto-optical Kerr effect for sensing application

High-Property Refractive Index and Bio-Sensing Dual-Purpose Sensor Based on SPPs

Molybdenum Disulfide‐based Lossy Mode Resonance Sensors: Uncovering Wider Dynamic Range and High Sensitivity Through Computational Approaches

Fiber Optic SPR Sensor Based on the Heterostructure of MoS2/WS2 with High Figure of Merit

Periodic stub implementation with plasmonic waveguide as a slow-wave coupled cavity for optical refractive index sensing

Design of an optimized $\text{MoS}_2$-based highly sensitive near-infrared surface plasmon resonance imaging biosensor

Highly sensitive plasmonic sensor with a coupled split-square-ring resonator

Strain‐Plasmonic Coupled Broadband Photodetector Based on Monolayer MoS 2

A high sensitive sensor using MIM waveguide coupled with a rectangular cavity with Fano resonance

Compact resonant plasmonic hybrid waveguide refractive index sensors for aqueous medium