Abstract:Concrete-to-concrete interfaces present both in new and existing construction, are commonly regarded as the weak link. Durability research of interfaces is a vital prerequisite for structural rehabilitation and strengthening applications under marine and coastal environments. Hence, to clarify the chloride ion transport behavior be-tween the new-old concrete composite system and its constituents, microstructural characteristics of the in-terfaces with various preparation methods were determined via field emission scanning electron microscopy. Then, the time-dependent diffusion chloride ion penetration together with its steady-state concentration distri-bution evaluated by using AgNO3 chromogenic, electron microprobe, and energy spectrum methods, as well as the numerical simulation based on the real interface roughness from the 3D laser scanning optical system. Results show that microcracks and a large amount of CaCO3 precipitations were formed in the concrete-to-concrete interface, where its porosity was higher compared to that of the matrix and interface transition zone around coarse aggregate; Therefore, the interface regions have higher tortuosity of water transport channel and strengthen the solution absorption rate, resulting in the internal chloride ions not only diffuse deeper perpen-dicular to the exposed surface but also ingress into the concrete on both sides as the concentration gradient simultaneously, leading to a "diffusion peak" formation. Furthermore, the effects of groove characteristics (such as orientations, clearance, width, and depth) on chloride transport were modeling evaluated in this study, in which the interfacial relationship could be optimized setting the reasonable groove and achieving the goal of durability equivalent to the cast-in-place structure.

Crack-altered durability properties and performance of structural concretes

INCORPORATING PRE-EXISTING CRACKS IN STRUCTURAL ASSESSMENT OF RC STRUCTURES

IMPACT OF CRACKING DAMAGE ON CONCRETE TRANSPORT PROPERTIES

Corrosion-Induced Cracking Propagation Of Rc Beams Subjected To Different Corrosion Methods And Load Levels

Transport Properties of Concrete Altered by Crack-Induced Damage

Characterizing the effect of compressive damage on transport properties of cracked concretes

Experimental and Numerical Study on the Microstructure and Chloride Ion Transport Behavior of Concrete-to-concrete Interface

INFLUENCE OF CRACKING WIDTH TO CONCRETE DURABILITY

Crack shape and rust distribution in corrosion-induced cracking concrete coupled with load

Experimental Study on Some Factors Affecting Fracture Property of Concrete

Model of Chloride Penetration into Cracked Concrete Subject to Drying–wetting Cycles

Early Age Properties and Cracking Control of Concrete

Cracking Behavior of Cfrp Laminate-Strengthened Rc Beams with Premechanical and Postmechanical Environmental Damage

Mechanical properties and numerical simulation of crack interface in reinforced concrete

Fracturing behaviors of FRP-strengthened concrete structures

Crack Propagation and Flexural Behaviour of Rc Beams under Simultaneous Sustained Loading and Steel Corrosion

New concrete cracking model established based on fracture mechanics and damage theory

Experimental study on fracture properties of self-compacting concrete

Influence of Flexural Loading on Chloride Ingress in Concrete Subjected to Cyclic Drying-Wetting Condition

Influence of cracking on chloride diffusivity and moisture influential depth in concrete subjected to simulated environmental conditions

Experimental Investigation on Transport Properties of Cement-Based Materials Incorporating 2D Crack Networks