Abstract:We introduce a novel piezoelectric stepper motor featuring high compactness, rigidity, and any direction operability. Here, not only is the structure of high novelty but also the working principle very simple. The piezo stacks unit is sandwiched between two spring finger pieces, with almost equal clamping forces applied between the top of the piezo stacks' unit and the spring finger piece. Applying individual driving signals to each of the five piezo stack pairs, causing deformation one by one in the same direction, followed by simultaneous recovery in the reverse direction, enables movement of the frame part. The optimized clamping force of the piezoelectric stack units and spring fingers ensures maximum output force. The motor's operational capability at low threshold voltages, specifically 8 V for downward movement and 10 V for upward movement, confirmed its efficacy in both vertical and horizontal directions. The motor's operational capability at a low threshold voltage of 10 V confirmed its efficacy in both vertical and horizontal directions. At room temperature, step size ranges from 0.3 to 7.4 µm at 20 Hz frequency and varying driving voltage from 10 to 180 V. It has a maximum travel range of about 5 mm and can lift a maximum load of 220 g in an upward direction, so the maximum output force generated by this motor is 2.2 N. The compact and rigid design is capable of building an atomically resolved scanning probe microscope, and its working ability has the potential to use the cleavage of different types of samples in limited space environments, such as the small-bore superconducting magnet and low temperature.

Characteristics of a Harmonic Piezoelectric Stepping Motor with a Cymbals-Style Amplifier

Development of a Resonant Type Piezoelectric Stepping Motor Using Longitudinal and Bending Hybrid Bolt-Clamped Transducer

A rigid and compact piezoelectric motor with high output efficiency

A bio-inspired piezoelectric motor with simple structured asymmetric stator

Design and Experimental Study of a Stepping Piezoelectric Actuator with Large Stroke and High Speed

Achieving smooth motion in displacement amplification piezoelectric stick-slip actuator

Vibration Analysis of Stepping Piezoelectric Micro-Motor Using Wiggle Mode

Resonant-type Inertia Linear Piezoelectric Motor Based on a Synchronized Switching Stimulated by Harmonic Synthesized Mechanical Square Wave

Design and Experimental Evaluation of a Novel Stepping Linear Piezoelectric Actuator

Piezoelectric-electrorheological Planar Stepper Motor

Multi-DOF and Sub-Micrometer Piezoelectric-Electrorheological Stepper Motor

Development and Experiment Evaluation of an H-shape Linear Piezoelectric Actuator Operated in Stepping Mode

A New Type of Linear Piezoelectric Stepper Motor

A Simple, Compact, and Rigid Piezoelectric Step Motor with Large Step Size

A Four-Foot Walking-Type Stepping Piezoelectric Actuator: Driving Principle, Simulation and Experimental Evaluation

Achieving low-frequency and high-speed motion based on bionic seal principle for piezoelectric actuator

A Long Stroke Linear Stepping Piezoelectric Actuator Using Two Longitudinal-Bending Hybrid Transducers

Design, simulation, and motion characteristics of a novel impact piezoelectric actuator using double statorsstators

Piezoelectric Linear Motor Using Resonant-Type Clamping Based on Harmonic Vibration Synthesis

Design of a Piezoelectric Motor Driven by Sawtooth Wave and Analysis of the Performance

A round-trip piezoelectric actuator with variable step and large displacement