Abstract:Cu-SSZ-13 and Zr-modified Cu-SSZ-13 catalysts with different Zr/Cu mass ratios were prepared by ion-exchange and impregnation methods, respectively. The NH3-SCR performance tests were performed using the catalyst performance evaluation device to investigate the effects of different Zr/Cu mass ratios on the catalyst ammonia-selective catalytic reduction (NH3-SCR) performance. X-ray diffraction, ICP-OES, BET, NH3 temperature-programed desorption (NH3-TPD), H2 temperature-programmed reduction (H2-TPR), X-ray photoelectron spectrometry, and in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS) were used to characterize the catalysts. The results show that the prepared Cu-SSZ-13 catalyst had good catalytic activity. Zr introduction was carried out on this basis. The results showed that proper Zr doping improved the catalytic activity at low temperatures and widened the high-temperature stage, with an optimal activity stage at a Zr/Cu mass ratio of 0.2. The NO x conversion efficiency was close to 100% at 200 °C and over 80% at 450 °C. The active species were well dispersed on the catalyst surface, and the metal modification did not change the crystal structure of the zeolite. The NH3-TPD results showed that the Zr-modified catalyst had more abundant acid sites, and the H2-TPR results indicated that the Cu species on the catalyst had excellent reducibility at low temperatures. The interaction between Cu and Zr could regulate the Cu+ and Cu2+ proportion on the catalyst surface, which facilitated the increase in the Cu+ for fast SCR reaction at low temperatures. With abundant acid sites and both SCR reactions following the Eley-Rideal (E-R) and Langmuir-Hinshelwood (L-H) mechanism on the catalyst surface at a low temperature of 150 °C, more abundant acid sites and reaction paths created favorable conditions for NH3-SCR reactions at low temperatures.

Low-Temperature Solid-State Ion-Exchange Method for Preparing Cu-SSZ-13 Selective Catalytic Reduction Catalyst

Redistributing Cu species in Cu-SSZ-13 zeolite as NH3-SCR catalyst via a simple ion-exchange

Identification of Active Sites and Reaction Mechanism on Low-Temperature SCR Activity over Cu-SSZ-13 Catalysts Prepared by Different Methods

High Activity and Wide Temperature Window of Fe‐Cu‐SSZ‐13 in the Selective Catalytic Reduction of NO with Ammonia

Insight into solid-state ion-exchanged Cu-based zeolite (SSZ-13, SAPO-18, and SAPO-34) catalysts for the NH3-SCR reaction: The promoting role of NH4-form zeolite substrates

Quasi-operando Quantification of Cu(ii) Ions in Cu-SSZ-13 Catalyst by an NH3 Temperature-Programmed Reduction Method

Study on the Performance of the Zr-Modified Cu-SSZ-13 Catalyst for Low-Temperature NH3-SCR

Cu-SSZ-13 zeolite–metal oxide hybrid catalysts with enhanced SO2-tolerance in the NH3-SCR of NOx

Effect of Fe Addition on the Structure and SCR Reactivity of One-Pot Synthesized Cu-SSZ-13

Rapid synthesis and hydrothermal stability enhancement of Cu-SSZ-13 zeolites for nitrogen oxide removal

Quasi- operando quantification of Cu( ii ) ions in Cu-SSZ-13 catalyst by an NH 3 temperature-programmed reduction method

Environmental benign synthesis of Nano-SSZ-13 via FAU trans-crystallization: Enhanced NH3-SCR performance on Cu-SSZ-13 with nano-size effect

Catalytic Activity of Cu–SSZ-13 Prepared with Different Methods for NH3-SCR Reaction

Tuning the high-temperature hydrothermal stability of one-pot derived Cu-SSZ-13 in the presence of SO 2 for selective catalytic reduction of NO x by ammonia

Promoting Effect of Mn on In Situ Synthesized Cu-SSZ-13 for NH3-SCR

Quantitative Cu Counting Methodologies for Cu/SSZ-13 Selective Catalytic Reduction Catalysts by Electron Paramagnetic Resonance Spectroscopy

In-Situ Synthesis of Cu-SSZ-13 Catalyst: Effect of Crystallization Time on NH3-SCR Performance

Disparate Essences of Residual, Ion-Exchanged, and Impregnated Na Ions on Topology Structure for Cu/SSZ-13 NH3 Selective Catalytic Reduction Catalysts

Exploring the optimal ratio of elemental components of the Cu/SSZ-13 framework: the reformation of NH<sub>3</sub>-SCR properties

Toward rational design of a novel hierarchical porous Cu-SSZ-13 catalyst with boosted low-temperature NO reduction performance

In-situ Interzeolite Transformation Synthesis Cu-SSZ-13 from Coal Fly Ash-derived Zeolite for NH3-SCR Reaction