Abstract:Silicon carbide nanoparticle-reinforced nickel-based composites（Ni–Si CNP）,with a Si CNPcontent ranged from1 to 3.5 wt%,were prepared using mechanical alloying and spark plasma sintering.In addition,unreinforced pure nickel samples were also prepared for comparative purposes.To characterize the microstructural properties of both the unreinforced pure nickel and the Ni–Si CNPcomposites transmission electron microscopy（TEM） was used,while their mechanical behavior was investigated using the Vickers pyramid method for hardness measurements and a universal tensile testing machine for tensile tests.TEM results showed an array of dislocation lines decorated in the sintered pure nickel sample,whereas,for the Ni–Si CNPcomposites,the presence of nano-dispersed Si CNPand twinning crystals was observed.These homogeneously distributed Si CNPwere found located either within the matrix,between twins or on grain boundaries.For the Ni–Si CNPcomposites,coerced coarsening of the Si CNPassembly occurred with increasing Si CNPcontent.Furthermore,the grain sizes of the Ni–Si CNPcomposites were much finer than that of the unreinforced pure nickel,which was considered to be due to the composite ball milling process.In all cases,the Ni–Si CNPcomposites showed higher strengths and hardness values than the unreinforced pure nickel,likely due to a combination of dispersion strengthening（Orowan effects） and particle strengthening（Hall–Petch effects）.For the Ni–Si CNPcomposites,the strength increased initially and then decreased as a function of Si CNPcontent,whereas their elongation percentages decreased linearly.Compared to all materials tested,the Ni–Si CNPcomposite containing 1.5% Si C was found more superior considering both their strength and plastic properties.

Nanoparticulate Dispersion, Microstructure Refinement and Strengthening Mechanisms in Ni-coated SiCp/Al-Cu Nanocomposites

Fabrication, Microstructure Refinement and Strengthening Mechanisms of Nanosized SiCP/Al Composites Assisted Ultrasonic Vibration

Microstructure and Mechanical Properties of Sic/Al Nanocomposite

Microstructures and Tensile Properties of Ultrafine-Grained Ni–（1–3.5） Wt% SiC NP Composites Prepared by a Powder Metallurgy Route

Variation of Microstructure and Mechanical Properties with Nano-Sicp Levels in the Nano-Sicp/alcumnti Composites

Microstructures and Tensile Properties of Nano-Sized SiCp/Al-Cu Composites Fabricated by Semisolid Stirring Assisted with Hot Extrusion

Microstructures and Mechanical Properties of Ni-coated SiC Particles Reinforced AZ61 Alloy Composites

Enhanced Combination of Strength and Ductility in Ultrafine-Grained Aluminum Composites Reinforced with High Content Intragranular Nanoparticles

Effects of SiC Nanoparticle Content on the Microstructure and Tensile Mechanical Properties of Ultrafine Grained AA6063-SiCnp Nanocomposites Fabricated by Powder Metallurgy

Precipitation behavior and mechanical properties of Al-Zn-Mg-Cu matrix nanocomposites: Effects of SiC nanoparticles addition and heat treatment

Effects of TiC0.5N0.5 Nanoparticles on the Microstructure, Mechanical and Thermal Properties of TiC0.5N0.5/Al-Cu Nanocomposites

Ni composites reinforced with ultrafine and uniform TiCx and Cr3C2 particles in situ: Enhanced properties and a well-matched interface

Microstructures and Tensile Properties of Al–Cu Matrix Composites Reinforced with Nano-Sized SiCp Fabricated by Semisolid Stirring Process

Densification and Mechanical Properties of Si3N4/SiC Nanocomposite Using Si-Nitrided Si3N4 Powder

Effects of nanosized TiCp dispersion on the high-temperature tensile strength and ductility of in situ TiCp/Al-Cu-Mg-Si nanocomposites

Effect of Micro-Nano Hybrid SiCp on Microstructure and Mechanical Properties of 7075al Alloy

Regulating the Mechanical Properties of (μm B4C+nm SiC)/7075Al Composites Via Nano-Sic Content

Effect of Ni content on the wear behavior of Al-Si-Cu-Mg-Ni/SiC particles composites

Mechanical Behavior of Α-Al2o3-coated SiC Particle Reinforced Nickel Matrix Composites

Preparation and properties of nano-SiC particle reinforced Al-Mg composite

Enhanced mechanical and wear properties of Ni-W-SiC composite coatings by synergistic influence of micro-nano SiC mixture