Abstract:Small-diameter end-mill is a key element for micro-machining technique. It is a new attempt to manufacture a small-diameter tool with polycrystalline diamond (PCD), which is also a hot issue in the research area of micro-manufacturing. PCD end-mills with small-diameter were fabricated and utilized in micro-milling. With a contact simulation model, the stress distribution and potential crack propagation of the PCD tool was revealed via 2D finite element (FE) analysis of 2Al2 aluminum alloy acting on the tool surface. Thereafter, a series of machining experiments on 2A12 micro-part were carried out with the PCD small-diameter end-mill. The wear characteristics of the rake face and flank face were analyzed, and the wear mechanisms of small-diameter end-mills were carefully investigated by using scanning electron microscope (SEM) and energy dispersive X-ray (EDX) spectroscopy. Three typical breakage morphologies of PCD end-mills were demonstrated while machining the aluminum alloy workpiece, i.e., the breakage of the tool tip, the edge chipping, and the peeling off of PCD layer. The consequent experiment results showed that abrasive wear, adhesive wear, and oxidative wear were the predominant characteristics in the damage region of PCD small-diameter end-mill. The effect mechanisms of various wear characteristics were also analyzed and revealed in detail. The experimental results were discussed according to the simulation results and effects on failure behavior of the PCD tool. The research can provide a better understanding for the wear and breakage behaviors of the downsized PCD tool in machining aluminum alloy and underpin the development of micro-milling process with diamond tool.

Effects of WC Grain Size and Co Content on Microscale Wear Behavior of Micro End Mills in Aluminum Alloy 7075 Machining

Effect of Grain Refinement and Composition on the Wear of Cemented Carbide Cutting Tools

Effect of particle size and high-energy ball milling time on microstructure and mechanical properties of WC-10Co cemented carbides with plate-like WC grains

Micro Milling Performance Assessment of Diamond-Like Carbon Coatings on A Micro-End Mill

Influence of cutting parameters on PCD tool wear during milling tungsten carbide

Cutting Edge Damage in Grinding of Cemented Carbides Micro End Mills

Wear and breakage behaviors of PCD small-diameter end-mill: a case study on machining 2A12 aluminum alloy

Cutting Performance of Different Coated Micro End Mills in Machining of Ti-6Al-4V

Effects of Nano-Al2o3 and Nano-Zro2 on the Microstructure, Behavior and Abrasive Wear Resistance of WC-8Co Cemented Carbide

Investigation on micro-milling of cemented carbide with ball nose and corner radius diamond-coated end mills

Effect of WC grain size on mechanical properties and microstructures of cemented carbide with medium entropy alloy Co-Ni-Fe binder

Tool Runout Effects on Wear and Mechanics Behavior in Microend Milling

Investigation of the Machined Surface Integrity of WC-High-Entropy Alloy Cemented Carbide

Wear of End Mills with Carbon Coatings When Aluminum Alloy A97075 High-Speed Processing

Effects of Different Chamfered Cutting Edges of Micro End Mill on Cutting Performance

Investigation on the Performance of Spark Plasma Sintered Ultrafine WC-Co Cemented Carbide End Mills During High-Speed Precision Milling of Ti-6Al-4V Alloy

Effects of WC Particle Size on Sintering Behavior and Mechanical Properties of Coarse Grained WC–8Co Cemented Carbides Fabricated by Unmilled Composite Powders

The Effect of Grain Size and Cobalt Content on the Wear of Ultrafine Cemented Carbide Tools

Effect of coarse grained WC addition on microstructure and mechanical properties of WC-Co cemented carbide

Effect of Carbon Content on Microstructure and Mechanical Properties of WC-10Co Cemented Carbides with Plate-Like WC Grain

Cutting Performances of Diamond Coated Milling Tools in Machining Aluminum Alloy