Abstract:Considering shortcomings of the current technology in controlling ground surface settlement and reducing the effect of excavation on the surrounding environment. This paper presents an experimental study on the flexural performance of composite structures of concrete-filled steel tubes, which are proposed as a new type of pipe-roof structure. It is also called as steel tube slab (STS) structure. The most important feature of this structure is that the adjacent steel tubes are connected using flange plates, bolts, and concrete in the transverse direction, forming the supporting system after pouring concrete. The main design parameters considered in this investigation are the connection type, spacing between the tubes, welding of the top flange, and thickness of the bottom flange. By conducting six flexural experiments, the failure process and crack development in the composite beams and their load–displacement curves are investigated. The results of laboratory tests show that the composite beams exhibit ductile failure. Increasing connections between the steel tubes has an obvious effect on the load-carrying capacity and flexural stiffness. The spacing between tubes can improve the flexural stiffness of STS beams, while having a limited effect on the longitudinal load-carrying capacity of the STS structure. Welding of the top flange and thickness of the bottom flange shows limited effect on the flexural performance of STS composite beams. Moreover, a series of numerical models is established to further identify the optimum tube thickness-to-flange-thickness ratio in terms of the flexural bearing capacity and stiffness. The numerical solutions suggest that the optimum ratio of the flange thickness to the tube thickness is between 1.0 and 1.25. Finally, a theoretical model for the flexural stiffness of the cross-section of this structure is also proposed, and the predicted results are found to be in excellent agreement with the test results. The research results can provide references for design and construction of STS method.

The Structural And Construction Performances Of A Large-Span Half Steel-Plate-Reinforced Concrete Hollow Roof

Experimental Study on Construction Tension and Local Component Failure of Double Inner and Outer Latticed Shell String Structure

Stability analysis of roof structure of Zhejiang University Zijingang Gymnasium

Shear Performance of Single Steel-Plate Concrete Composite Beams with Various Transverse Reinforcement Configurations

Investigation of the shear resistances of steel-concrete-steel composite structures with bidirectional webs

Seismic Performance Assessment of Composite Frame–High-Strength Steel Plate Wall Core Tube Resilient Structural System

Experimental Investigation on Seismic Behavior of Steel Truss-RC Column Hybrid Structure with Steel Diagonal Braces

Experimental Study and Theoretical Analysis on Seismic Performance of RC Shear Wall with STRC Columns and Embedded Steel Plate

Deflection prediction of assembly integral steel-concrete floor voided with steel mesh boxes

Numerical Simulation Study on Mechanical Bearing Behavior of Arch Steel–Concrete Composite Sandwich Roof

Interaction behaviour of buckling-restrained steel plate shear wall and boundary composite frame

Experimental study on seismic performance of frame with steel-hollow core partially encased composite spliced beam

Shear Failure Mechanisms of SCS Sandwich Beams Considering Bond-Slip Between Steel Plates and Concrete

Shear behavior of pre-damaged RC beams strengthened with steel plate and UHPC

Prefabricated tubular light roof truss assembled with screwed novel modular connectors: Full-scale test and FE modelling

Experimental and numerical study regarding H-steel all-bolted connection steel frame with composite wall boards

Experimental investigation of the seismic performance of an L-shaped roof-sidewall joint with a cogging composite connection

Experimental Study on Aseismic Performance of a Full-Scale Multi-Story Residential Building of CTSRC Structure

Performance Analysis of Heavy Duty Cast Steel Supports for Structures with a Large Span Steel Roof

Experiments and Numerical Simulations on the Seismic Performance of Steel-Frame Composite Wallboard Shear Walls

Flexural performance of a novel pipe-roof structure and optimization of key parameters