Abstract:<p>This paper proposes a steel frame assembled with a concrete-filled steel tubular (CFST)-bordered composite wall structure. The composite wall was fabricated as an assembled seismic member to improve the seismic performance of the steel frame. Therefore, on the basis of a full-sized bare steel frame as a contrast specimen, four full-sized steel frames assembled with CFST-bordered composite wall specimens were designed. The differences among these four specimens include the use of inclined braces in the CFST-bordered composite walls and the different designs of the inclined braces, and these differences are to investigate the influence of the inclined braces on the proposed structures. Low cyclic loading was applied to the specimens, and the seismic behavior of each specimen was analyzed. The experimental results indicated that the seismic performance of the bare frame was greatly enhanced by the assembled CFST-bordered composite wall. The setting of the rebar braces or the CFST braces can significantly increase the yield load, peak load, and dissipation energy capacity, and the inverted V-shaped braces are efficient. The rebar braces can also delay concrete cracking and release strength degeneration. As the first line of defense, the damage of the CFST-bordered composite wall occurs earlier than that of the steel frame, and the damage of the steel frame is slight when the CFST-bordered composite wall is broken. The steel frame can still work as the second line of defense to prevent the collapse of the structure. Furthermore, calculation methods were proposed for determining the bearing capacities of the bare steel frame and the CFST-bordered composite wall based on the failure modes identified during testing and finite element analysis. The calculated results were in good agreement with the test results.</p>

Interaction behaviour of buckling-restrained steel plate shear wall and boundary composite frame

Seismic Behavior of Composite Shear Walls Incorporating Concrete-Filled Steel and FRP Tubes As Boundary Elements

Analytical Study On Buckling Restrained Braced Composite Frames

Experimental study and numerical simulation of seismic performance of stiffened thin steel plate shear walls considering the effect of vertical load on frame column

Seismic Behavior of Buckling Restrained Braced Composite Frames

Seismic Behaviors of High-Strength Bolted End-Plate Connected Composite Steel Beam and Square Concrete Filled Steel Tube Column Frames

Experimental Investigation of Steel Frames with Infill Prefabricated Reinforce-Concrete Shear Walls

Experimental Study on Seismic Behavior of Steel Frame with Prefabricated Reinforced Concrete Infill Slit Shear Walls

Buckling of Flexural-Shear Bracing System and Its Braced Steel Frames

Experimental study on three types of steel plate shear walls under cyclic loading

Experimental and Numerical Investigation of Cross-Shaped Buckling-Restrained SPSWs with Composite Structure

Seismic behavior of composite frame infilled composite steel plate shear walls

Seismic Performance Evaluation on Composite Frame Structures with T-shaped Multi-Cellular CFST Columns

Analysis of Concrete Filled Square Steel Tubular Frame-Steel Plate Shear Wall Structural Systems

Experimental research of seismic performance of concrete filled steel tube composite frame structure with welded buckling-restrained braces

Seismic Behavior of Cfst-Enhanced Steel Plate-Reinforced Concrete Shear Walls

Experimental Research on the Seismic Behavior of CSPSWs Connected to Frame Beams

Seismic Behavior of Steel Plate Reinforced Concrete Composite Shear Walls under Tension-Bending-Shear Combined Cyclic Load

Seismic performance of a steel frame assembled with a CFST-bordered composite wall structure

Numerical modelling and equivalent brace model of cold-formed steel buckling-restrained steel plate shear walls

HYSTERETIC BEHAVIOR OF BUCKLING-RESTRAINED STEEL PLATE SHEAR WALL