Abstract:The wheelset coaxial wheel diameter difference is one of the most common wheel faults of railway vehicles. The existence of the wheelset coaxial wheel diameter difference may lead to the off-load operation of vehicles, resulting in abnormal wheel tread wear, leading to the deterioration of the wheel-rail contact relationship, resulting in the deterioration of the vehicle's operating stability and comfort, and even leading to an increase in the derailment coefficient, affecting the running safety. In order to monitor the freight car wheelset coaxial wheel diameter difference online, a vehicle-track coupling dynamics model based on a trackside detection method was established, and the response of rail lateral displacement under the condition of the wheelset coaxial wheel diameter difference was analyzed. The results show that the existence of the wheelset coaxial wheel diameter difference can lead to a deviation in the vehicle's run, with an increase in the wheelset coaxial wheel diameter difference and an increase in the lateral offset of wheelset increases. The impact of vehicle unbalance loading on the lateral movement of the wheelset is much smaller than that of the wheelset coaxial wheel diameter difference. The existence of the wheelset coaxial wheel diameter difference can be better reflected by detecting the wheelset's lateral displacement. On straight line, the variation of lateral displacement has no infection of vehicle speed, but shows a quadratic growth trend with the wheelset coaxial wheel diameter difference. Based on this, the mapping relationship between the wheelset coaxial wheel diameter difference and wheelset lateral displacement can be obtained. Through a mapping relationship, the size of the wheelset coaxial wheel diameter difference can be reversed precisely through the detection of a trackside lateral movement monitoring system. The reliability of the identification method was verified with a specific test on the trackside monitoring system.

Research of Error Compensation Methods and Equipment for Bogie Wheel Alignment Parameters in Horizontal Plane

Survey of rolling angle measurement methods

Analysis and Compensation of Installation Errors for Circular Grating Angle Sensors

Study on Calibration Method and System Error Compensation of Balancing Machines

Error impact analysis and experimental research for absolute testing of spherical surfaces

Research on the Error Measurement and Error Compensation Technology for CNC Machine Tools

A Study of the Technology of System Deviation Separation and Compensation for a Smart Precision Wheel Boss Detector

Research on an Identification Method for Wheelset Coaxial Wheel Diameter Difference Based on Trackside Wheelset Lateral Movement Detection

Study on Detection Error Analysis, the Error Separation and Compensation Technology of the Intelligent Accurate Measurer of Aluminum Wheel

On-Machine Measurement of Wheel Tread Profile With the 1-D Laser Sensor

The effect analysis of system deviation to the detcetion precision of wheel boss measure

Geometric Analysis of Measurement Errors in a Surface Metrology Class with Closed-Loop Probes

Research on the Errors Measurement for CNC Machine Tools

Research on the Position Error Compensation of Linear Motor

A New Error Measurement Method to Identify All Six Error Parameters of A Rotational Axis of A Machine Tool

Experimental and Numerical Investigation of Bogie Hunting Instability for Railway Vehicles Based on Multiple Sensors

The Detection of Wheel-Flats Based on Fiber Optic Bragg Grating Array

Large-Scale All-Wheel Alignment Globally Registered by Laser Line Family and Verified by Global Benchmark

Online Detection System for Wheel-Set Size of Rail Vehicle Based on 2d Laser Displacement Sensors

In-Service Detection and Quantification of Railway Wheel Flat by the Reflective Optical Position Sensor

Automatic Inspection System for Wheel-Aligning Parameters