Abstract:The stress-based criteria have long been adopted as the major guideline in the design of line pipes, but for those under the displacement control, such as pipelines in seismic regions, landslide areas and subsea environment, the stress-based criteria tend to be relatively conservative, instead the strain-based criteria will be more economic and reasonable to use in the pipe design. Hence, the strain-based design methods in different international standards were summarized and compared, as well as their applicable conditions. In view of the different formulas of the ultimate compressive strain of local buckling in the standards of Norway, Canada, etc., calculations of the ultimate compressive strain were conducted under different radius-thickness ratios and design pressures. It is revealed that the Canadian standard expression and Japanese SUZUKI formula are more conservative. To meet the demand of real engineering application, it was suggested that 0.3 t/D (t refers to the pipe wall thickness; D refers to the external diameter of pipes) be adopted as a conservative estimation of the ultimate compressive strain in the absence of design pressure, and that the Canada standard expression be employed while the design pressure can not be ignored. Because the strain-based design process has not been proposed in the Chinese pipeline codes, the work of this paper can serve as a reference for the research in the relevant areas in present China.

The Research on the Different Loading Paths of Pipes under Combined External Pressure and Axial Tension

The research on the critical loading path of thick-walled pipes under external pressure and cyclic bending

Buckling Response of Offshore Pipelines under Combined Tension, Bending, and External Pressure

A study of the ultimate compressive strain of local buckling in strain-based design of pipelines

Local Buckling Characteristics of Stainless-Steel Polypropylene Deep-Sea Sandwich Pipe under Axial Tension and External Pressure

Buckling Response of Offshore Pipelines under Combined Tension and Bending

Buckling collapse of submarine thick-wall pipe under torque and hydraulic pressure based on vector form intrinsic finite element method

Local buckling of deepwater oil-gas pipeline under high hydrostatic pressure

Buckling Analysis on a Pipe Conveying Fluid under Two Stresses

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

Buckle Propagation Analysis of Deep-Water Petroleum Transmission Pipelines with Axial Tension

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Collapse Of Tubes Under Combined Bending And Axial Compression Loads

On Elastic-Plastic Collapse of Subsea Pipelines under External Hydrostatic Pressure and Denting Force

On the Collapse Failure of Dented Pipes under Bending Moment and External Pressure

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

On the Buckling Crossover of Thick-Walled Pipe Bend under External Pressure

Behaviour of Reinforced Thermoplastic Pipe (RTP) under Combined External Pressure and Tension

On the buckling of mechanically lined pipes under combined tension and bending

Confined Collapse of Unbonded Multi-Layer Pipe Subjected to External Pressure

Buckle Propagation of Offshore Pipelines under External Pressure