Abstract:The frequency bandwidth of the conventional electro-hydraulic vibration exciter is highly dependent on the servo valve's response speed, which is always limited to a rather narrow range. A novel scheme of electro-hydraulic vibration exciter using a two-dimensional valve (2D valve) to control a hydraulic actuator is proposed in order to extend the frequency range. In this 2D valve, the rotary and linear motions of a spool are controlled independently to produce the reciprocating motion of the piston of the cylinder. The frequency and the amplitude of the excited waveform are separately controlled by the rotary motion and the sliding motion of the spool respectively. The frequency is related to the rotary speed of the spool and the coupling pattern between the grooves on the spool and windows on the sleeve. This configuration could easily extend the frequency of the hydraulic vibration exciter by increasing the rotary speed of the spool and the number of the grooves on the spool area. Based on the work principle of the electro-hydraulic vibration system, the mathematical models are first established considering a nonlinear relation between pressure and flow. Then the analytic solution to excited waveforms is solved using the subsection integration method. And the expression equations of correlated parameters are given. Finally, real excited waveforms are obtained to validate the theoretical analysis result. The results reveal that the load of electro-hydraulic vibration exciter using a 2D valve is mainly the elastic force in low frequency section, so the ascent and descent slopes of excited waveform demonstrated somewhat asymmetrically in respect that the direction of the elastic load is changed. The extent of asymmetry depends on the 2D valve's axial opening. When it exceeds a critical value, the excited waveform tends to the saturated state because of pressure saturation. The exciter waveform is also influenced by hydraulic resonance as the input frequency approaches the hydraulic resonant frequency.

Experimental and Numerical Investigations of Hydraulic Resonance Characteristics of a High-Frequency Excitation System

Experimental Investigations on the Nonlinear Dynamics of Magnetorheological Dampers

Joint clearance effects on dynamics of two-axis hydraulic vibration test system

Resonance Analysis of High-Frequency Electrohydraulic Exciter Controlled by 2D Valve

Modeling and Analysis of Hydraulic Controlled Rotary Valve Excitation System

Design, Modeling and Experimental Validation of a Variable Resonant Electro-Hydraulic Fatigue Testing System

Numerical Study on a Compound Hydraulic Pulsation Attenuator Based on String-Fluid Resonance

Experimental analysis of attenuators in hydraulic circuits

Output Characteristics of a Horizontal Type Electro-Hydraulic Excitation System with Inertial Loading: Modeling and Experimentation

Numerical Simulation and Experimental Analysis of an Active Hydraulic Excitation System Based on Pulsating Flow

Waveforms Analysis and Optimization of New Electro-Hydraulic Excitation Technology

Characteristics Study of Electro-Hydraulic Load-Sensing Control System for Mobile Machines

A Hybrid Lumped Parameters/Finite Element/Boundary Element Model to Predict the Vibroacoustic Characteristics of an Axial Piston Pump

Research on Electro-Hydraulic Servo Resonance Technology

Cavitation Resonance: the Phenomenon and Unknown

Theoretical and Experimental Investigations of Vibration Waveforms Excited by an Electro-Hydraulic Type Exciter for Fatigue with a Two-Dimensional Rotary Valve

Theoretical investigation of the contributions of the excitation forces to the vibration of an axial piston pump

Dynamic Impact of Hydraulic Systems Using Pressure Feedback for Active Damping

Study on Synchronous Vibration Control of an Electrohydraulic Vibration Exciter

INVESTIGATION INTO CAVITATION INDUCED NOISE WITHIN HYDRAULIC RELIEF VALVE

Experimental Study on the Vibration Control Capability of a Hybrid Squeeze Film Damper