Ultra-low Cost Porous Mullite Ceramics with Excellent Dielectric Properties and Low Thermal Conductivity Fabricated from Kaolin for Radome Applications

Biao Zhang,Jie Ma,Jian Ye,Yicheng Jin,Chunping Yang,Junjie Ding,Zhiguo Zhang,Zhaoping Hou,Qiang Liu,Feng Ye

DOI: https://doi.org/10.1016/j.ceramint.2019.06.120

IF: 5.532

2019-01-01

Ceramics International

Abstract:Near-net-shape mullite ceramics with high porosity were prepared from ultra-low cost natural aluminosilicate mineral kaolin as raw material and polystyrene micro-sphere (PS) as pore-forming agent. Microstructure, flexural strength, thermal conductivity and dielectric properties of the ceramics were systematically researched. Results show that the porous mullite ceramics possess fibrous skeleton structure formed by a large quantity of interlocked mullite whiskers, which results in good mechanical properties and low-to-zero sintering shrinkage. Flexural strength of the porous mullite ceramics can be up to 41.01 +/- 1.12 MPa, even if the porosity is as high as 62.44%. The dielectric constant and loss tangent of the porous mullite ceramics at room temperature are lower than 2.61 and 5.9 x 10(-3), respectively. Besides, dielectric constant is very stable with the rising of temperature, and the dielectric loss can be consistently lower than 10(-2) when the temperature is not higher than 800 degrees C. In addition, thermal conductivity at room temperature is as low as 0.163 W/m/K when the porosity of mullite ceramics is 80.05%. The infiltration of SiO2 aerogels (SiO2 AGs) can further decrease the thermal conductivity to 0.075 W/m/K, while has just little effects on the dielectric properties. Excellent mechanical, thermal and dielectric properties show that the porous mullite ceramics have potential applications in radome fields. The porous mullite ceramics prepared from kaolin not only have low cost, but also can achieve near-net-shape.