Abstract:The microstructure and mechanical properties of Mg94Y4Zn2 and Mg94Y4Zn1Ni1 alloys have been systematically investigated by optical microscopy (OM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and an electronic universal testing machine. The as-cast WZ42 alloy is composed of α-Mg matrix, 18R LPSO (long period stacking ordered) phase and a small fraction of Mg24(Y,Zn)5 phases. With the replacement of 1at% Ni atoms, the phase structures in WZN411 alloy remain unchanged, but their chemical compositions vary obviously. A great number of stacking faults exist in α-Mg grains of WZ42 alloy, while they are barely observed in WZN411 alloy. After annealing at 500°C for 12h, there are plenty of 14H LPSO lamellas formed in WZ42 alloy and many nano-scale α-Mg slices generated between 18R phases. In contrast, the 18R in WZN411 alloy is thermally stable, and both the formation of α-Mg slices and 14H lamellas are restricted for annealed WZN411 alloy. Tensile tests indicate that the as-extruded WZ42 alloy exhibits ultimate tensile strength of 390MPa, tensile yield strength of 246MPa and elongation of 2.8% at room temperature. With the replacement of 1at% Ni, the UTS and TYS of WZN411 alloy increase by 20MPa and the ductility improves as well. The improvement of comprehensive mechanical properties could be ascribed to the substitution of 1at% Ni element, which could enhance the degree of solid-solution strengthening and stimulate the thermal stability of 18R phase during annealing and extrusion processes.

Effect of Ni addition on microstructure and mechanical properties of Al–Mg–Si–Cu–Zn alloys with a high Mg/Si ratio

Micro-alloying effects of Ni on the microstructure and mechanical properties of an Al-Zn-Mg-Cu-Sc-Zr alloy

Effect of Zn Concentration on the Microstructure and Mechanical Properties of Al-Mg-Si-Zn Alloys Processed by Gravity Die Casting

Effect of Addition of Ni and Si on the Microstructure and Mechanical Properties of Cu–Zn Alloys

Effect of Ni addition on the microstructure, conductivities and mechanical properties of as-cast Al-Fe alloys

Effect of nickel on the microstructure and mechanical property of die-cast Al–Mg–Si–Mn alloy

Effect of Ni Addition on the Solidification Process and Microstructure of Al-12%Si-4% Cu-1.2%Mn-x%Ni Heat-Resistant Alloys

The Evolution of Microstructure and Mechanical Properties at Elevated Temperature of Cast Al–Li–Cu–Mg Alloys with Ni Addition

Effect of Ni on Microstructures and Mechanical Properties for Multielemental Nb–Si-Based Alloys

Effects of Ni content on microstructure and wear behavior of Al–13Si–3Cu–1Mg-xNi-0.6Fe-0.6Mn alloys

Effects of Ni Addition on the Microstructure and Compressive Deformation Behavior in Zr–Cu–Ni Martensitic Alloys

Effect of Zn Content on the Microstructure and Mechanical Properties of Mg–Al–Sn–Mn Alloys

Effect of substitution of 1at% Ni for Zn on the microstructure and mechanical properties of Mg94Y4Zn2 alloy

Influences of Mg content on the microstructures and mechanical properties of cast Al–2Li–2Cu–0.2Zr alloy

Influence of Ni Contents on Microstructure and Mechanical Performance of AlSi10Mg Alloy by Selective Laser Melting

Influence of Ni-CNTs additions on the microstructure and mechanical properties of extruded Mg-9Al alloy

Effects of the Mg/Si Ratio on Microstructure, Mechanical Properties, and Precipitation Behavior of Al–Mg–Si–1.0 wt %-Zn Alloys

Effect of Minor Ni Addition on the Microstructure, Mechanical Properties and Corrosion Behavior of Mg–2Gd Alloy

Effect of Casting Process and Zr, V Addition on Microstructure and Mechanical Properties of Al–12Si-4.5Cu–2Ni Alloy

Effect of Alloying Elements on Mechanical Properties and Microstructure of Al-Si Alloy

Effect of Mn Addition on Microstructure and Mechanical Properties of Cast Al-2li-2cu-0.8mg-0.4zn-0.2zr Alloy