Abstract:Carbon-based composite materials, denoted as C/C composites and possessing high thermal conductivity, were synthesized utilizing a three-dimensional (3D) preform methodology. This involved the orthogonal weaving of mesophase pitch-based fibers in an X (Y) direction derived from low-temperature carbonization, and commercial PAN-based carbon fibers in a Z direction. The 3D preforms were saturated with mesophase pitch in their raw state through a hot-pressing process, which was executed under relatively low pressure at a predetermined temperature. Further densification was achieved by successive stages of mesophase pitch impregnation (MPI), followed by impregnation with coal pitch under high pressure (IPI). The microstructure and thermal conductivity of the C/C composites were systematically examined using a suite of analytical techniques, including Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), and PLM, amongst others. The findings suggest that the volumetric fraction of fibers and the directional alignment of the mesophase pitch molecules can be enhanced via hot pressing. The high graphitization degree of the mesophase pitch matrix results in an increased microcrystalline size and thus improved thermal conductivity of the C/C composite. Conversely, the orientation of the medium-temperature coal pitch matrix is relatively low, which compensates for the structural inadequacies of the composite material, albeit contributing minimally to the thermal conductivity of the resultant C/C composites. Following several stages of impregnation with mesophase pitch and subsequent impregnation with medium-temperature coal pitch, the 3D C/C composites yielded a density of 1.83 and 2.02 g/cm3. The thermal conductivity in the X (Y) direction was found to be 358 and 400 W/(m·K), respectively.

A C<sub>20</sub>-based 3D carbon allotrope with high thermal conductivity

Thermal Conductivity of A New Carbon Nanotube Analog: the Diamond Nanothread

A C20 Fullerene-Based Sheet with Ultrahigh Thermal Conductivity

Lower thermal conductivity of body centered cubic carbon (C14): a comparative study with diamond

A Possible Superhard Orthorhombic Carbon

Ultrahigh Thermal Conductivity Of Carbon Allotropes With Correlations With The Scaled Pugh Ratio

Orthorhombic C36: a Sp2–sp3 Carbon with Pressure-Induced Metallization and Superconductivity

Thermal Transport in Planar Sp2-Hybridized Carbon Allotropes: A Comparative Study of Biphenylene Network, Pentaheptite and Graphene

A New 3D Carbon Allotrope Composed of Penta-graphene Nanotubes with Low Lattice Thermal Conductivity.

Ultra-high thermal conductivity of two-dimensional C 23

The Microstructure and Thermal Conductive Behavior of Three-Dimensional Carbon/Carbon Composites with Ultrahigh Thermal Conductivity

Ultra-high thermal conductivities of tetrahedral carbon allotropes with non-simple structures

High and Anisotropic Thermal Conductivity of Body-Centered Tetragonal C4 Calculated Using Molecular Dynamics

Design of a Class of New Sp 2 – Sp 3 Carbons Constructed by Graphite and Diamond Building Blocks

From layered 2D carbon to 3D tetrahedral original allotropes C12 and C18 with physical properties related to diamond: Crystal chemistry and DFT investigations

An Efficient Strategy for Searching High Lattice Thermal Conductivity Materials

Two semiconducting three-dimensional all-sp2 carbon allotropes

A Stable Trigon-Based 3D Carbon Allotrope with Ultralow Lattice Thermal Conductivity

A New Two-Dimensional All-Sp3 Carbon Allotrope with an Indirect Band Gap and Superior Carrier Mobility

D-carbon: A New sp3 Carbon Allotrope

Thermal Conductivity Reduction in Carbon Nanotube by Fullerene Encapsulation: A Molecular Dynamics Study