Abstract:Yttria-stabilized zirconia (YSZ) based potentiometric gas sensors have been widely utilized for detecting NOx (NO and NO2). Nevertheless, it is still remains challenging issue for YSZ-based sensors to sense total NOx due to the opposite response signals to NO and NO2. Herein, we report an efficient strategy to sense total NOx at high temperature (above 300 °C) by designing a dual functional sensing electrode (SE); namely, the SE will simultaneously convert NO (in NOx mixture) to NO2 and electrocatalyze all of the obtained NO2 to generate the response signal of total NOx. In comparison with those previously reported total NOx sensors, the proposed total NOx sensor will be featured with a simplified sensor configuration and desirable long-term stability. To confirm the practicability of the proposed strategy, the NO conversion rate of several metal oxides and their composites have been measured and it turns out that the Co3O4/NiO shows relatively high NO conversion rate. Further study indicates a YSZ-based sensor consisting of (Co3O4 + 20 wt % NiO)-SE and Mn-based RE demonstrates satisfactory performance in detecting total NOx. For instance, analogous response magnitude to NO and NO2 as well as the mixture of NO/NO2 (within 35 ppm) is witnessed for the sensor; particularly, the sensor gives acceptable stability and response/recovery rate at the operating temperature of 500 °C within the examined period. In summary, the use of dual functional SE (e.g., Co3O4/NiO composite SE) indeed addressed those issues of concern in monitoring the level of total NOx and has provided a promising alternative way for designing future high-performance total NOx sensor.

Solid State Electrolyte Type Gas Sensor Using Stabilized Zirconia and MTiO3 (M: Zn, Co and Ni)-SE for Detection of Low Concentration of SO2

High-sensitivity SO2 Gas Sensor Based on YSZ Electrolyte and SrTiO3 Sensing Electrode

A Potentiometric So2 Gas Sensor Based On The Li3po4-Li2sio3 Solid Electrolyte Thin Film

Mixed Potential Type Sensor Using Stabilized Zirconia and La<sub>0.75</sub>Sr<sub>0.25</sub>Cr<sub>0.5</sub>Mn<sub>0.5</sub>O<sub>3</sub> Sensing Electrode for NO<sub>2</sub> Detection

Mixed potential type sensor using stabilized zirconia and La 0.75Sr0.25Cr0.5Mn0.5O3 sensing electrode for NO2 detection

A YSZ-based mixed potential sensor achieving fast detection and complete recovery to SO 2 through combining a high-temperature pulse and Pd catalyst in sensing electrode

YSZ-Based Mixed Potential Type Sensors Utilizing Pd-doped SrFeO 3 Perovskite Sensing Electrode to Monitor Sulfur Dioxide Emission

An Enhanced YSZ Gas Sensor through Optimizing Electrode Thickness for ppb-level H2S Detection

Chemiresistive detection of SO 2 in SF 6 decomposition products based on ZnO nanorod/MoS 2 nanoflower heterojunctions: experimental and first-principles investigations

Potentiometric NO2 Sensors Based on Thin Stabilized Zirconia Electrolytes and Asymmetric (La0.8Sr0.2)0.95MnO3 Electrodes

Mixed-potential Type NO2 Sensor Prepared with CuCr2O4-CuO Composite Sensing Electrode

Novel Solid-State Manganese Oxide-Based Reference Electrode for Ysz-Based Oxygen Sensors

Cu-doped flower-like SnO2 architecture toward promoting SO2 detection: Fast equilibrium and low trace monitoring

High Performance H2S Sensor Based on Ordered Fe2O3/Ti3C2 Nanostructure at Room Temperature

A Fully Solid-State SOx (x = 2,3) Gas Sensor Utilizing Ag-ß″-alumina As Solid Electrolyte

A Mixed-Potential Type NH <sub>3</sub> Sensor Based on Spinel Zn <sub>2</sub>SnO <sub>4</sub> Sensing Electrode

High-Performance Sulfur Dioxide Gas Sensor Based on Graphite-Phase Carbon-Nitride-Functionalized Tin Diselenide Nanorods Composite

Compact Yttria-Stabilized Zirconia Based Total NOx Sensor with a Dual Functional Co3O4/NiO Sensing Electrode

Prototypes of Potentiometric SO2 Gas Sensors Based on Li3PO4 Electrolyte Thin Film

A review of high-temperature electrochemical sensors based on stabilized zirconia

An Amperometric Type NO2 Sensor Utilizing La0.7Sr0.3MnO3-δ-NiO Composite Sensing Electrode