Abstract:Torque ripple caused by zero-sequence current (ZSC) and relatively high switching frequency severely worsens the operating performance of an open-winding permanent-magnet synchronous machine (OW-PMSM) system with common dc bus. In this paper, a novel q-axis current injection method based on the angle-shift-based voltage distribution is proposed for the OW-PMSM system with common dc bus. With the proposed method, torque ripple caused by ZSC can be counteracted by the torque component generated by the injected q-axis current. Meanwhile, the corresponding modulation range is analyzed to investigate the availability of the proposed method. Moreover, in order to reduce the switching frequency, zero vector (111) is no longer necessary to compensate the zero-sequence component and conventional space vector pulsewidth modulation (PWM) with zero vectors (000) and (111) can be simplified. The switching actions in one PWM period can be reduced from 12 to 8. The comparison of losses shows that this strategy can effectively improve the efficiency under both heavy load and high switching frequencies. Finally, the effectiveness of the proposed method is validated through an OW-PMSM experiment with common dc bus.

A Double Zero-sequence Voltage Injection PWM Strategy for a Five-leg Inverter Supplying Dual Three-phase Permanent Magnetic Synchronous Motor

A PWM Strategy for Six-Phase Dual Stator Induction Motor Fed by Two Identical Voltage Source Inverters

Control Strategy for Open Winding PMSM System Supplied by the Z-source and Voltage Source Integrated Converters

Zero-sequence Component Injection ZVS-PWM for Three-phase Grid Inverter with Arbitrary Power Factor Angle

The PWM Strategy in Full Modulation Region for Dual Three-phase-induction Motors Based on Vector Decomposition and Superposition Principle

Analysis of zero state vector distribution based on space vector PWM techniques for dual Y shift 30 degree PMSM

An Impulse Modulation Strategy for the M-Phase Permanent Magnet Synchronous Motor with the Current Source Inverter

Investigation of Decoupled PWM Strategy for a Three-Phase Open-End Winding Permanent Magnet Synchronous Motor Using a Five-Leg Inverter

Zero Sequence Current Suppression Strategy for Open Winding PMSG Fed by Semi-controlled Converter

Realization of A Spwm Inverter for Multi-Phase Induction Motor Drives

Non-sinusoidal Output Voltage for Multiphase Variable Speed Drives with Space Vector PWM

An Enhanced SVPWM Strategy Based on Vector Space Decomposition for Dual Three-Phase Machines Fed by Two DC-Source VSIs

SVPWM control strategy for a three phase five level dual inverter fed open-end winding induction motor

A Carrier-Based Pwm Method with Zero-Sequence Current Elimination for Multiphase Double-End Winding Drives

Torque Ripple Suppression Method with Reduced Switching Frequency for Open-Winding PMSM Drives with Common DC Bus.

A Sensorless Drive Strategy for Open-End Winding PMSM with Common DC Voltage Based on Lower Switching Frequency

A Novel SVPWM Scheme for Field-Oriented Vector-Controlled PMSM Drive System Fed by Cascaded H-Bridge Inverter

New space vector PWM drive for the control of two-phase BLDC

Space Vector Modulation Based On Lookup Table For A Dual-Inverter-Fed Open-End Winding Pmsm Drive

Two New-type Control Strategies for Six-Phase Open Winding PMSM

An improved two-phase PWM strategy for inverters in electric vehicle