Abstract:Being aware of the great hazard of transformer winding deformation and insulation damage under the impact of huge electromagnetic forces caused by short circuit faults, this paper presented an analysis method based on explicit dynamic 3-D finite element method, enabling detailed and representative investigations of the mechanical effects of external short circuit faults in power transformers. Considering the displacements and deformations of windings could change the leakage flux distribution and further influence the remaining computation, an electromagnetic-mechanical field coupling model was proposed. To accurately calculate the windings transient deformation, both the disks and spacers were considered as the elastic-plastic body. Meanwhile, the high-voltage and low-voltage windings were modeled into 21 disks and 18 spacers are evenly arranged between the adjacent copper disks. For illustrating the effectiveness of the proposed method, a real full-scale 120 MVA/220 kV oil-immersed transformer model was built to suffer the serious three-phase short circuit fault as the case study. A comparison of the von-Mises stress distribution in healthy, pre-strain and dislocation windings under the same short circuit fault confirmed that the healthy winding can withstand the impact of short circuit fault without any unrecoverable deformation; insufficient mechanical strength, pre-strain and local dislocation are the key factors to winding deformation, rupture even collapse. Additionally, the theoretical model and simulation method can be used as a substitute for costly and cumbersome field tests in faults characteristics analysis of transformer windings.

Modeling and Calculating the Power Frequency Magnetic Field of the Substation Based on the Method of Moments

Measurement and Analysis on Magnetic Field Influence of Substation for Magnetic Shielding Device

THE ELECTROMAGNETIC FIELD CALCULATION IN SUBSTATION BY THE METHOD OF MOMENT

A Calculation Method of Fault Current Distribution and Shunt Coefficient in Substation Based on Phase-coordinate Model

Analysis on Power Frequency Magnetic Field in Typical Designed 220 Kv Substation

Research on lightning intruding waves in 220 kV GIS substation

The Application of Charge Simulation Method in the Electric Field Calculation for Substation

Study On Calculation Method And Simulation Software Of The Electromagnetic Environment Of The Substation'S Key Equipments

Calculation Of Transient Electromagnetic Fields Generated During Switching Operation In Power Substation By The Method Of Moment And Superposition Principle

Equivalent substitution method-based failures analysis for electromagnetic loop

Research on Magnetic Field Characteristics in DC Yard of Dinghai Converter Station Under Monopolar Grounding Fault

A Method to Calculate Short-Circuit Faults in High-Voltage DC Grids

Computation and Analysis of Power Transformer Winding Damage Due to Short Circuit Fault Based on 3-D Finite Element Method

Single‐pole Fault Line Selection Method for MVDC Distribution Grid Based on 0‐mode Power

Study on Calculation and Mitigation Measurements of Power Frequency Electric Field Strength of Residential Buildings Near High Voltage AC Transmission Lines

Simplified Calculation and Coverage of Power Frequency Magnetic Field Around 10kv Air-core Reactors

E-Field Distribution of Circuit with Value Controlled Reactors in 750 Kv Substations

Corrosion Fault Diagnosis for Substation's Grounding Grid Based on Micro Method

Reliability Assessment of Multiple-Voltage Regional Transmission and Distribution System Considering Substation Interior Failure

Multiple Failures Analysis for Complex Electric Power System

Analysis of Affecting Factors on Fault Shunt Coefficient in Substation