Abstract:The significant increase in lithium batteries consumption produces a significant quantity of discarded lithium-ion batteries (LIBs). On the one hand, the shortage of high-grade ores leads to the necessity of processing low-grade ores, which contain a low percentage of valuable metals in comparison to the discarded LIBs that contain a high percentage of these metals, which enhances the processing of the discarded LIBs. On the other hand, the processing of discarded LIBs reduces the negative environmental effects that result from their storage and the harmful elements contained in their composition. Hence, the current study aims at developing cost-effective and ecofriendly technology for cobalt and lithium metal ion recovery based on discarded LIBs. A novel synthesized solid-phase adsorbent (TZAB) was utilized for the selective removal of cobalt from synthetic solutions and spent LIBs. The synthesized TZAB adsorbent was characterized by using 13C-NMR, GC-MS, FT-IR, 1H-NMR, and TGA. The factors affecting the adsorption of cobalt and lithium ions from synthetic solutions and spent LIBs, including the sorbent dose, pH, contact time, temperature, and cobalt concentration were investigated. The conditions surrounding the recovery of cobalt and lithium from processing discarded LIBs, were investigated to optimize the maximum recovery. The Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) isotherm models were used to study the kinetics of the adsorption process. The obtained results showed that high-purity CoC2O4 and Li3PO4 were obtained with a purity of 95% and 98.3% and a percent recovery of 93.48% and 95.76%, respectively. The maximum recovery of Co(II) from synthetic solutions was obtained at C0 = 500 mg·L-1, dose of 0.08 g, pH 7.5, T = 25 °C, and reaction time = 90 min. The collected data from Langmuir's isotherm and the adsorption processes of Co agree with the data predicted by the D-R isotherm models, which shows that the adsorption of Co(II) onto the TZAB seems to be chemisorption, and the results agree with the Langmuir and D-R isotherm models.

Electrochemical Recovery of Cobalt Using Nanoparticles Film of Copper Hexacyanoferrates from Aqueous Solution.

Preparation, characterization and application in cobalt ion adsorption using nanoparticle films of hybrid copper–nickel hexacyanoferrate

Recovery of Nickel and Cobalt Metal Powders from the Leaching Solution of Spent Lithium-Ion Battery by Solvent Extraction and Chemical Reduction

A combined process for cobalt recovering and cathode material regeneration from spent LiCoO2 batteries: Process optimization and kinetics aspects

Recovery of Li and Co in Waste Lithium Cobalt Oxide-Based Battery Using H1.6Mn1.6O4

Selective separation and recovery of Co(II) and Ni(II) from lithium-ion battery using Cyanex 272 adsorptive membrane

Diverse Surface Chemistry of Cobalt Ferrite Nanoparticles to Optimize Copper(II) Removal from Aqueous Media

Recovery of high-purity metallic cobalt from lithium nickel manganese cobalt oxide (NMC)-type Li-ion battery

Cobalt Electrochemical Recovery from Lithium Cobalt Oxides in Deep Eutectic Choline Chloride+Urea Solvents

Hollow self-floating microspheres capture cobalt (Co 2+ )/nickel (Ni 2+ ) ions from the acidic leachate of spent lithium-ion battery cathodes

Removal of cobalt ions (II) from simulated radioactive effluent by electrosorption on potassium hydroxide modified activated carbon fiber felt

Highly efficient re-cycle/generation of LiCoO2 cathode assisted by 2-naphthalenesulfonic acid

Adsorption of Cobalt onto Zeolitic and Carbonaceous Materials: A Review

Eco-Friendly Recycling of Lithium Batteries for Extraction of High-Purity Metals

Novel MOFs-based ion-imprinted polymer for selective separation of cobalt ions from waste battery leaching solution

Solvent extraction-based recovery of Co from leach solutions of Cu Co ores using a Mextral 6103H-naphthenic acid- isooctanol system

Electrostatic Spray Deposition of Nanoporous Coo/Co Composite Thin Films As Anode Materials for Lithium-Ion Batteries

Preparation and Electrochemical Property of Copper Cobalt Hexacyanoferrate Hybrid Film

Ascorbic-acid-assisted Recovery of Cobalt and Lithium from Spent Li-ion Batteries

Magnetic Copper Hexacyanoferrate Core-shell Nanoparticles for Effective Cesium Removal from Aqueous Solution

A Combined Recovery Process Of Metals In Spent Lithium-Ion Batteries