Abstract:The effect of rolling temperature on the incomplete recrystallization behavior and the relationship to mechanical properties in 0.06C–4Mn-1.2Cr (wt.%) steel was investigated. Three plates of experimental steel were produced by hot rolling at different temperatures and intercritical annealing processes in this study. The microstructure of experimental steels was examined by optical microscopy (OM), scanning electron microscopy (SEM), X-ray diffraction (XRD), electron backscatter diffraction (EBSD), and transmission electron microscope (TEM). The mechanical properties of test steel were examined by impact test and tensile test. Austenite reversion and cementite precipitation-dissolution was numerically simulated under the assumption of local equilibrium. With the decrease of hot rolling temperature from 1000 °C to 800 °C, the uniform equiaxed prior austenite grains microstructures changed to heterogeneous microstructures of laminated and ultrafine prior austenite grains arranged alternatively. The tensile and impact tests revealed that the medium manganese steels rolling at 800 °C had an excellent combination of mechanical properties. Elongation had a great relationship with retained austenite fraction and stability. The fractography of impact specimens was examined to explore the toughening mechanism of the micro-laminated steels. The steel with uniform equiaxed grain structure exhibited a relatively low tensile strength of 750 MPa and low elongation of ∼20% and an extremely poor low-temperature toughness of ∼40 J at −40 °C. An enhanced low-temperature toughness (∼233 J at −40 °C), as well as an improved tensile strength (823 MPa) and higher elongation of ∼40%, was obtained in the steel with heterogeneous microstructures. The content of austenite in heterogeneous microstructure is twice that in uniform equiaxed grain structure. And cementite dissolved more thoroughly in the heterogeneous microstructure. The high austenite content of heterogeneous microstructures enabled the steel to be significantly stronger and ductile, which contributed to the high tensile strength and elongation to some extent. It is concluded that the effect of interface decohesion resulted in the occurrence of delamination. And the high austenite content and delamination greatly improved the low-temperature toughness of experimental steel.

Effects of rolling process and microstructure on the brittle crack initiation and arrest of a marine steel under low‐temperature

Effect of rolling temperature on microstructure and mechanical properties of medium manganese steel

The Influence of Controlled Rolling and Cooling on Microstructure and Mechanical Properties of Marine Steel

Effect of rolling reduction below γ non-recrystallization temperature on pancaked γ, microstructure, texture and low-temperature toughness for hot rolled steel

Effects of rolling process on microstructure and mechanical properties of ultra high strength steel

Microstructure evolution and mechanical properties of metastable austenitic medium Mn steel fabricated by warm caliber rolling

Microstructural Evolution and Mechanical Properties of 6cr13 Martensitic Stainless Steel Subjected to Cold Rolling and Heat Treatments

Effect of Microstructure on Low-Temperature Fracture Toughness of a Submerged-Arc-Welded Low-Carbon and Low-Alloy Steel Plate

Influence of warm rolling temperature on multi-scale lamellar structure and mechanical properties of medium carbon steel

Microstructure evolution and compressive properties of a low carbon-low alloy steel processed by warm rolling and subsequent annealing

Effects of Warm Rolling Temperature on Microstructure Evolution and Mechanical Properties of Medium Carbon Martensite Steel

Effect of Rolling Process Parameters on Transverse Cracks on the Surface of Q345 Steel

Study of Cryogenic Treatment on the Microstructure and Mechanical Properties of Marine 10Ni5CrMoV Steel

Effect of rolling temperature on microstructure evolution and mechanical properties of high carbon high manganese steel

Effects of intermediate annealing and rolling on plastic failure and grain refinement of Al-Mg-Li alloy

Microstructural effects on central crack formation in hot cross-wedge-rolled high-strength steel parts

Effect of Warm Rolling Temperature on the Microstructure and Texture of Microcarbon Dual-Phase (DP) Steel

Effect of Controlled Rolling on the Strength and Toughness of Low‐Alloy Martensitic Steel

Effect of Prior-Austenite Grain Size on the Microstructure and Mechanical Properties of Ultrafine-Grained Dual-Phase Layer-Structured Steel Produced by Hot Rolling of Intercritical Annealed Bainite

The impact of intercritical annealing temperature on microstructure and mechanical properties of an ultra-low carbon medium manganese heavy steel plates

Effects of Annealing Time on Microstructure Evolution of Bidirectional Warm Rolled Medium Carbon Martensite Steel