Abstract:In the field of non-destructive evaluation (NDE) of solid metal materials, it has been a challenge to detect surface and internal defects simultaneously by using a single physical mechanism technique. Conventionally, different testing techniques, in which each one is particularly sensitive to a certain type of defect, are employed to gain full defect information. However, a separated testing method is always a time-consuming and laborious work. Here, we report a magnetoelectric-ultrasonic hybrid transducer and multimodal system for quantitative NDE of metal, which integrates a magnetoelectric composite wrapped with a coil for generating alternating current field and simultaneously measuring magnetic abnormal of surface defects (referred to as ME-ACFM) and a dual-piezoceramic ultrasonic transducer (DP-UT) for generating acoustic pulses and detecting the echo signal of internal defects, respectively. A bipulse signal with different pulse widths is used for excitation of the hybrid transducer, in which one is corresponded to the resonant frequencies of 5 MHz for DP-UT, and another to 122 kHz for ME-ACFM. The huge difference between two resonant frequencies is helpful for restraining signal interference each other. Experimental investigations show that when scanning the tested specimens (standard steel No.45 and aluminum plates), the surface and internal defects information can be obtained simultaneously almost without a dead zone. The surface defect resolutions of 0.1 mm width and 0.1 mm depth, and the inside defect resolution of 2 mm blind hole are obtained; the experimental errors for surface defect (crack) depth up to 5 mm are around 5 %; while experimental errors for ultrasonic depth measurement (with a blind zone of 1.25 mm) is less than 0.63 mm. The proposed hybrid transducer and multimodal system open up a new way for designing multi-physical mechanism based NDEs.

Detection of Surface Defects in Film-Coated Metals and Measurement of Coating Thickness

Nondestructive Evaluation of Special Defects Based on Ultrasound Metasurface

Detecting features of defect metal based on laser ultrasonic technique

Quantitative Detection of Surface Defect Using Laser-Generated Rayleigh Wave with Broadband Local Wavenumber Estimation

Differential Two-Wave Mixing Interferometer for Crack Detection in Metallic Structures Based on Laser-Induced Ultrasound

Quantifying Hidden Defect In Multi-Layered Structures By Using Eddy Current System Combined With A Scanner

Design and Testing of a Micro Thermal Sensor for Non-Contact Surface Defect Detection.

Surface defects evaluation system based on electromagnetic model simulation and inverse-recognition calibration method

Noncontact Group-Delay-Based Sensor for Metal Deformation and Crack Detection

Width and Depth Gauging of Rectangular Subsurface Defects Based on All-Optical Laser-Ultrasonic Technology

Non-ferromagnetic thin metal micron-sized defect detection system based on coherent accumulation-difference method

Thickness Measurement of Nano-Metallic Film with Electromagnetic Sensor under Large Sensor-Sample Distance

Microwave cavity resonator sensor with an octagonal cross section for thickness measurement of coatings on carbon fibre composites

NDT of the Shape of a Thin 3D Slit on the Metal Surface by Millimeter Waves

Metal Thickness Measurement System Based on a Double-Coil Eddy-Current Method with Characteristic Ratio Detection.

A Defect Detection Method for the Surface of Metal Materials Based on an Adaptive Ultrasound Pulse Excitation Device and Infrared Thermal Imaging Technology

A magnetoelectric-ultrasonic multimodal system for synchronous NDE of surface and internal defects in metal

A 3-D Imaging Method for Local Shallow Defects on the Surface of Ferromagnetic Materials

Thickness Measurement of Metallic Film Based on a High-Frequency Feature of Triple-Coil Electromagnetic Eddy Current Sensor

A Defect Visualization Method Based on ACFM Signals Obtained by a Uniaxial TMR Sensor

Theoretical limits of magnetic detection of structural surface defects at the nanometre scale