Abstract:The selective catalytic reduction (SCR) technique that converts NOx from the outlet of industrial boilers at low temperature (<200 °C) requires catalysts that possess both the oxidization property of NOx and the adsorption ability to NH3. However, owing to unsuitable redox capacity, most NH3-SCR catalysts such as MnO2/TiO2 and MnO2–CeO2/TiO2 suffer from poor activity and N2 selectivity and SO2 poisoning. Benefiting from constructing mesoporous MnCeSmTiOx amorphous mixed oxides by the coprecipitation method, enhanced SO2-tolerant low-temperature NH3-SCR performance was achieved. The MnCeSmTiOx catalysts have an amorphous and mesoporous structure with a BET surface area of 214 m2·g–1. The NO conversion could reach nearly 100% at 140–320 °C and maintain >90% at 400 °C and a gas hourly space velocity of 80,000 h–1. The selectivity of N2 could be maintained at ≈100% at 100–320 °C and stay at >90% up to 400 °C. Besides, the MnCeSmTiOx catalyst preserves higher catalytic performance after introducing H2O and SO2 compared with the catalysts without adding Sm. The redox properties, acidic properties, and reaction intermediates of catalysts were analyzed by X-ray photoelectron spectroscopy, hydrogen temperature-programmed reduction, ammonia temperature-programmed desorption (NH3-TPD), O2-TPD, pyridine-IR, thermogravimetry–differential scanning calorimetry, and diffuse reflectance infrared Fourier transform. The synergistic effect of the Lewis acid sites and oxidation catalytic sites of mixed oxides serves for the conversion of NO to N2 by following the Langmuir–Hinshelwood mechanism. Doping Sm into MnCeSmTiOx can increase oxygen vacancies and transfer electrons to Mn4+ and Ce4+, which facilities the formation of active adsorbed NO2, bidentate nitrate, and bridging nitrate intermediates and suppresses SO2 poisoning by inhibiting the oxidation of SO2 by Mn4+ and Ce4+. Our work could be beneficial to modulate the redox capacity of active sites on NH3-SCR catalysts so that NOx can be eliminated in complex flue gas at low temperatures.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acscatal.0c02567?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acscatal.0c02567</a>.Experimental details, kinetic experiments and the calculation process of the reaction rate, reaction order, and TOF; XRD patterns; TEM images; and in situ DRIFTS spectra with adsorption of NH3 NO + O2 on MnSmTiOx and CeSmTiOx catalysts (<a class="ext-link" href="/doi/suppl/10.1021/acscatal.0c02567/suppl_file/cs0c02567_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

The Behavior of Different Pretreated La 0.8 Sr 0.2 MnO 3 /Α-Al 2 O 3 in CH 4 -SCR of NO with Water Vapor

Catalytic performance of MnO 2-CeO 2/Ti 0.25Zr 0.25Al 0.5O 1.75 monolith catalyst for low temperature selective catalytic reduction of NO with NH 3

Experimental Study on Reduction of NO by CH4 over La0.8Sr0.2MnO3/α-Al2O3 in Excess of O2

ICOPE-15-C068 the Selective Catalytic Reduction of NO_x with CH_4 on La_<1-x>Sr_xMnO_3 (x=0.2, 0.4) Catalysts

Catalytic oxidation of NO with O2 over Pt/γ-Al2O3 and La0.8Sr0.2MnO3

Selective Catalytic Reduction ofNOx by Methane over La(1-x)SrxMnO3 Perovskites

Performance of Low-temperature SCR of NO with NH3 over MnOx/Ti-based catalysts

NO reduction by CH4 in the presence of O2 over La2O3 supported on Al2O3

Effect of Calcination Conditions on MnOx/Al2O3 Catalytic Efficiency for NO Oxidation

Alkali-induced Deactivation Mechanism of V2O5-WO3/TiO2 Catalyst During Selective Catalytic Reduction of NO by NH3 in Aluminum Hydrate Calcining Flue Gas

Enhancement of NO Oxidation Activity and SO2 Resistance over LaMnO3+δ Perovskites Catalysts with Metal Substitution and Acid Treatment

Effect of Water Vapor on NH3–NO/NO2 SCR Performance of Fresh and Aged MnOx–NbOx–CeO2 Catalysts

Low-temperature SCR of NOx by NH3 over MnOx/SAPO-34 prepared by two different methods: a comparative study

No Reduction by Ch4 in the Presence of Excess O-2 over Mn/Sulfated Zirconia Catalysts

Improved Activity and SO 2 Resistance by Sm-Modulated Redox of MnCeSmTiO x Mesoporous Amorphous Oxides for Low-Temperature NH 3 -SCR of NO

NH 3 -SCR Performance of Mn-Fe/TiO 2 Catalysts at Low Temperature in the Absence and Presence of Water Vapor

Physicochemical and Catalytic Properties of La0.8K0.2CuxMn1-xO3 for Simultaneous Removal of NOx and Soot: Effect of Cu Substitution Amount and Calcination Temperature

Influence of Different Supports on the Physicochemical Properties and Denitration Performance of the Supported Mn-based Catalysts for NH3-SCR at Low Temperature

Fe-Mn/Al2O3 Catalysts for Low Temperature Selective Catalytic Reduction of NO with NH3

Synergistic Removal of NOx and VOCs from Flue Gas on Mn-Based Catalysts

Highly Selective Catalytic Reduction of NOx by MnOx–CeO2–Al2O3 Catalysts Prepared by Self-Propagating High-Temperature Synthesis