In Situ Synthesis and Electrochemical Performance of MoO3-x Nanobelts As Anode Materials for Lithium-Ion Batteries.

Qi-Long Wu,Shi-Xi Zhao,Le Yu,Lu-Qiang Yu,Xiao-Xiao Zheng,Guodan Wei

DOI: https://doi.org/10.1039/c9dt02917f

IF: 4

2019-01-01

Dalton Transactions

Abstract:MoO3−x nanobelts with different concentrations of oxygen vacancies were synthesized in situ, whose effects on lithium-ion storage performance were researched.

What problem does this paper attempt to address?

In-situ TEM Experiments and First-Principles Studies on the Electrochemical and Mechanical Behaviors of Α-Moo3 in Li-ion Batteries

Yonghe Li,Hong Sun,Xiaopeng Cheng,Yuefei Zhang,Kejie Zhao

DOI: https://doi.org/10.1016/j.nanoen.2016.06.045

IF: 17.6

2016-01-01

Nano Energy

Abstract:Metal oxides hold the promise of high-capacity anodes for Li-ion batteries. Lithiation of binary metal oxides proceeds with two typical mechanisms: insertion and conversion. We characterize the two-step lithiation behavior of α-MoO3, namely, Li intercalation in the layered α-MoO3 leads to the formation of crystalline Li2MoO3 in the early stage of lithiation, and further Li insertion coverts LixMoO3 to metallic Mo and amorphous Li2O. The intercalation process is thermodynamically more favorable and is accompanied with a minor volumetric change, while the conversion reaction is kinetically slow and induces large deformation. Furthermore, instead of showing significant Li-embrittlement as seen in typical oxides, α-MoO3 remains defects free despite the nearly 100% repetitive volumetric change during lithiation cycles. The reaction mechanism, structural evolution, and mechanical behaviors are unveiled through coordinated in-situ transmission electron microcopy experiments on α-MoO3 nanobelts and first-principles computational studies. The results provide fundamental perspectives in the course of developing reliable high-capacity electrodes for Li-ion batteries.
Boosting the electrochemical performance of MoO 3 anode for long-life lithium ion batteries: Dominated by an ultrathin TiO 2 passivation layer

Xiaopeng Cheng,Yonghe Li,Lijun Sang,Jinyao Ma,Huifeng Shi,Xianqiang Liu,Junxia Lu,Yuefei Zhang

DOI: https://doi.org/10.1016/j.electacta.2018.03.009

IF: 6.6

2018-01-01

Electrochimica Acta

Abstract:In this report, using atomic layer deposition (ALD) technique, TiO2 layer with different thickness is conformally deposited on the surface of MoO3 nanobelts for enhanced-performance anode. Impressively, the MoO3@85-TiO2 (85 cycles coating) nanobelts anode shows its best comprehensive value: The initial Coulombic efficiency (CE) dramatically increases from 44% to 73% compared to bare MoO3 electrode; It also delivers highest initial specific capacity of 1153.7 mAh g−1 at 100 mA g−1, which is superior to the uncoated MoO3 (427.3 mAh g−1). Additionally, MoO3@85-TiO2 nanobelts show a remarkable long-life stability from initial 913.6 to 935.8 mAh g−1 after 400 charge-discharge cycles at 400 mA g−1. The advanced TEM characterizations reveal that the TiO2 layer can experience a transition from amorphous into crystalline Li2Ti2O4 with cubic structure (a = 8.375 Å) during cycling, which are acted as an efficient lithium ion conductor. Furthermore, the quantified mechanical properties demonstrate a remarkable decrease in the bending elastic modulus of MoO3@85-TiO2 nanobelts compared to that of pristine MoO3. Therefore, the boosted electrochemical performance can be attributed to efficient lithium ions transportation across the moderate conductor layer and robust mechanical integrity that the large volume variation. These results advance the understanding in the coating regulated materials for enhanced-performance LIBs.
Oxygen Vacancy-Enriched MoO3−x Nanobelts for Asymmetric Supercapacitors with Excellent Room/low Temperature Performance

Qi-Long Wu,Shi-Xi Zhao,Le Yu,Xiao-Xiao Zheng,Yi-Feng Wang,Lue-Qiang Yu,Ce-Wen Nan,Guozhong Cao

DOI: https://doi.org/10.1039/c9ta03471d

IF: 11.9

2019-01-01

Journal of Materials Chemistry A

Abstract:In situ synthesized oxygen vacancy-enriched MoO3−x nanobelts realized excellent electrochemical performance as asymmetric supercapacitors at room/low temperature.
An Electrochemical Investigation on (moo3+pvp+pva) Nanobelts for Lithium Batteries

W. Chen

DOI: https://doi.org/10.1007/s10008-007-0278-4

IF: 2.747

2007-01-01

Journal of Solid State Electrochemistry

Abstract:Molybdenum trioxide (MoO3) xerogel films modified with poly(vinyl alcohol)+poly(vinyl pyrrolidone) (PVP+PVA) polyblends were obtained by ion-exchange method with sol-gel technique. Investigations were conducted using X-ray "diffractometry", Fourier transform infrared spectroscopy, and cyclic voltammetry. The results show that the H atoms in polyblend are H-bonded with the O atoms in the Mo=O bonds of MoO3 xerogel, which effectively shield the electrostatic interaction between MoO3 interlayer and Li+ ions when MoO3 xerogel is modified by the intercalation of (PVP+PVA). The reversibility of the insertion/extraction of Li+ ions is greatly improved by the modification with polyblend of MoO3 nanocomposite films. MoO3 and (PVP+PVA)(x)MoO3 (x=0, 0.5) nanobelts were obtained by a simple hydrothermal process from MoO3 sol. The electrochemical cells with configuration Li/(LiPF6+EC+DMC)/MoO3 modified by (PVP+PVA) were fabricated and their discharge profiles studied.
Probing Lithium Storage Mechanism Of Moo2 Nanoflowers With Rich Oxygen-Vacancy Grown On Graphene Sheets

Yu Zhou,Hui Xie,Changda Wang,Qun He,Qin Liu,Zahir Muhammad,Yasir A. Haleem,Yuan Sang,Shuangming Chen,Li Song

DOI: https://doi.org/10.1021/acs.jpcc.7b04533

2017-01-01

Abstract:The search for new electrode materials is of paramount importance for the practical apply of lithium-ion batteries (LIBs). Herein, flower-like MoO2 microislands consist of MoO2 nanorods grown on both sides of graphene sheets were synthesized via a solvo-thermal method, followed by a simple thermal treatment in argon. Our EXAFS and ESR data suggest there oxygen-vacancies in MoO2 of the FMMGS hybrids. Besides, by tunning the ratio of glucose and CTAB, samples with different oxygen-vacancies content were synthesized. When used as anode materials for lithium-ion batteries, the oxygen vacancy-rich FMMGS hybrids exhibited obviously higher capacity, rate capability than any nonvacancy samples. Importantly, synchrotron-radiation-based X-ray absorption near-edge structure (XANES), extended X-ray absorption fine-structure (EXAFS) and ex situ X-ray diffraction (ex situ XRD) were employed to elucidate the Li-ion insertion and extraction processes in the MoO2 electrode. Our data clearly revealed that Li2MoO4 was generated during the Li uptake/removal process, which can be attributed to the existence of Abundant oxygen vacancies in MoO2 microislands. This provides us a useful insight for better understanding of dynamic cycling behavior in various Mo-based electrodes.
Facile preparation of MoO 3 @Mo 2 CT x nanocomposite with high lithium storage performance by in situ oxidation

Yitong Guo,Qixun Xia,Yukai Chang,Libo Wang,Aiguo Zhou

DOI: https://doi.org/10.1088/1361-6528/ad1b01

IF: 3.5

2024-01-30

Nanotechnology

Abstract:Abstract In this work, a new MoO 3 @Mo 2 CT x nanocomposite was prepared from two–dimensional (2D) Mo 2 CT x MXene by in situ oxidization in air, which exhibited wonderful lithium-storage performance as anodes of lithium–ion batteries (LIBs). The precursor Mo 2 CT x was synthesized from Mo 2 Ga 2 C by selective etching of NH 4 F at 180 °C for 24 h. Thereafter, the Mo 2 CT x was oxidized in air at 450 °C for 30 min to obtain MoO 3 @Mo 2 CT x nanocomposite. In the composite, in situ generated MoO 3 nanocrystals pillar the layer structure of Mo 2 CT x MXene, which increases the interlayer space of Mo 2 CT x for Li storage and enhances the structure stability of the composite. Mo 2 CT x 2D sheets provide a conductive substrate for MoO 3 nanocrystals to enhance the Li + accessibility. As anodes of LIBs, the final discharge specific capacity of the MoO 3 @Mo 2 CT x composite was 511.1 mAh g –1 at a current density of 500 mA g –1 after 100 cycles, which is about 36.7 times that of pure Mo 2 CT x MXene (13.9 mAh g –1 ) and 3.2 times that of pure MoO 3 (159.9 mAh g –1 ). In the composites, both Mo 2 CT x and MoO 3 provide high lithium storage capacity and can enhance the performance of each other. Moreover, this composite can be made by a facile method of in situ oxidation. Therefore, the MoO 3 @Mo 2 CT x MXene nanocomposite is a promising anode of LIB with high performance.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Synergistic effect of molybdenum dioxide wrapped nitrogen doped carbon nanotubes in binder-free anodes for enhanced lithium storage properties

Hui Zhang,Zhi Tan,Yuwei Xia,Chao Wang,Haili Pang,Xiaoxia Bai,Hao Liu,Ajit Khosla

DOI: https://doi.org/10.1088/1361-6528/ad8c4c

IF: 3.5

2024-10-30

Nanotechnology

Abstract:Molybdenum dioxide (MoO2) is regarded as a potential anode for lithium-ion batteries due to its highly theoretical specific capacity. However, its further application in lithium-ion battery is largely limited by insufficient practical discharge capacity and cyclic performance. Here, MoO2 nanoparticles are in-situ grown on three-dimensional nitrogen doped carbon nanotubes (NCNTs) on nickel foam substrate homogeneously using a simple electro-deposition method. The unique structural features are favorable for lithium ions insertion and extraction and charge transfer dynamics at electrode/electrolyte interface. As a proof of concept, the as-synthesized nanocomposites have been employed as anode for lithium-ion battery, exhibiting a reversible and significantly improved discharge capacity of ~ 517 mA h g-1 at the current density of 150 mA g-1 as well as superior cycle and rate performance. The first-principle calculations based on density functional theory (DFT) and electrochemical impedance spectroscopy results demonstrate a reduced energy barrier of lithium ions diffusion, improved lithium storage behavior, reduced structure collapse, and significantly enhanced charge transfer kinetics in MoO2/NCNTs nanocomposites with respect to MoO2 powder. The excellent performance makes as-prepared MoO2/NCNTs nanocomposites promising binder-free anode for high performance lithium-ion batteries. This work also provides important theoretical insights for other state-of-the-art batteries design.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Probing Lithium Storage Mechanism of MoO2 Nanoflowers with Rich Oxygen-Vacancy Grown on Graphene Sheets

Yu Zhou,Hui Xie,Changda Wang,Qun He,Qin Liu,Zahir Muhammad,Yasir A. Haleem,Yuan Sang,Shuangming Chen,Song Li

DOI: https://doi.org/10.1021/acs.jpcc.7b04533

2017-01-01

Abstract:The search for new electrode materials is of paramount importance for the practical apply of lithium-ion batteries (LIBs). Herein, flower-like MoO2 microislands consist of MoO2 nanorods grown on both sides of graphene sheets were synthesized via a solvo-thermal method, followed by a simple thermal treatment in argon. Our EXAFS and ESR data suggest there oxygen-vacancies in MoO2 of the FMMGS hybrids. Besides, by tunning the ratio of glucose and CTAB, samples with different oxygen-vacancies content were synthesized. When used as anode materials for lithium-ion batteries, the oxygen-vacancy-rich FMMGS hybrids exhibited obviously higher capacity, rate capability than any nonvacancy samples. Importantly, synchrotron-radiation-based X-ray absorption near-edge structure (XANES), extended X-ray absorption fine-structure (EXAFS) and ex situ X-ray diffraction (ex situ XRD) were employed to elucidate the Li-ion insertion and extraction processes in the MoO2 electrode. Our data clearly revealed that Li2MoO4 was generated during the Li uptake/removal process, which can be attributed to the existence of abundant oxygen vacancies in MoO2 microislands. This provides us a useful insight for better understanding of dynamic cycling behavior in various Mo-based electrodes.
Synthesis, Characterization and Lithium-Storage Performance of MoO2/carbon Hybrid Nanowires

Qingsheng Cao,Lichun Yang,Xinchun Lu,Jianjiang Mao,Yahong Zhang,Yuping Wu,YI Tang

DOI: https://doi.org/10.1039/b921001f

2010-01-01

Journal of Materials Chemistry

Abstract:This paper presents a novel strategy to synthesize MoO2/carbon nanowires based on organic-inorganic hybrid nanocomposites with nanometre periodic structures. The organic-inorganic hybrid precursors provide uniform reactions throughout the composites for achieving novel carbon-hybrid structures and nano-morphology via easy calcination. Through the systematic physical characterization including scanning electron microscopy, transmission electron microscopy, X-ray powder diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy, etc., the one-dimensional and carbon-hybrid structure of MoO2/C nanowires was confirmed. This synthetic strategy is also proved universal for other novel MoO2/C nanostructures based on various organic-inorganic hybrid precursors. Furthermore, the MoO2/C hybrid nanowires show good rate capability even at the high current density of 1000 mA g(-1) as anode material for lithium ion battery.
Nanocomposite of ultra-small MoO2 embedded in nitrogen-doped carbon: In situ derivation from an organic molybdenum complex and its superior Li-Ion storage performance

Cheng Zheng,Weixin Wu,Qixin Deng,Yafeng Li,Mingdeng Wei

DOI: https://doi.org/10.1016/j.jcis.2021.02.035

IF: 9.9

2021-06-01

Journal of Colloid and Interface Science

Abstract:MoO2 is a promising anode material for lithium-ion batteries, however, the lithiation of bulk MoO2 is usually limited to addition-type reaction at room temperature, and the conversion reaction is hindered because of the sluggish kinetics. Herein, a nanocomposite of MoO2 embedded in nitrogen-doped carbon (MoO2/NC) is synthesized through the in situ thermolysis of an organic molybdenum complex MoO2(acac)(phen) (acac = acetylacetone, phen = 1,10-Phenanthroline). Owing to the fact that [MoO2]2+ can be strongly chelated by phen, the molybdenum source in the MoO2(acac)(phen) precursor is highly dispersed, leading to the formation of ultra-small MoO2 nanoparticles in the nanocomposite, which can facilitate the conversion reaction. Moreover, the NC matrix can guarantee a high electrical conductivity and effectively accommodate the volume changes triggered by the conversion reaction. Consequently, the MoO2/NC nanocomposite exhibits outstanding electrochemical properties, including large reversible capacity of 950 mA h g-1 at 0.1 A g-1, high-rate capability of 605 mA h g-1 at 2A g-1, and excellent cycling stability over 500 cycles as an anode material for lithium-ion batteries.

chemistry, physical
Preparation of Carbon Coated Moo2 Nanobelts and Their High Performance As Anode Materials for Lithium Ion Batteries

Lichun Yang,Lili Liu,Yusong Zhu,Xujiong Wang,Yuping Wu

DOI: https://doi.org/10.1039/c2jm31364b

2012-01-01

Journal of Materials Chemistry

Abstract:Carbon coated MoO2 nanobelts were successfully synthesized via a hydrothermal method followed by calcination under inert atmosphere, using alpha-MoO3 nanobelts as the precursor and self-template, ethanol as the reducer and glucose as the carbon source. Under the protection of polysaccharide resulting from glucose polycondensation, the 1-D morphology can be well retained during the reduction and carbonization processes. Tested as anode materials for lithium ion batteries, the carbon coated MoO2 nanobelts exhibit a reversible capacity of 769.3 mA h g(-1) at a current density of 100 mA g(-1) in the first cycle, and retain 80.2% of the capacity after 30 cycles. When the current density increases, this material shows high rate capability and good cycling performance.
Facile Synthesis of Magnesiated Alpha-Moo3 and Its Electrochemical Performance in Li-ion Batteries.

Qingqin Liang,Yueming Li,Jinghong Li

DOI: https://doi.org/10.1166/jnn.2012.5810

2012-01-01

Journal of Nanoscience and Nanotechnology

Abstract:A facile approach has been developed for the synthesis of layered structure of magnesiated alpha-MoO3 based on the precipitation reaction, in which alpha-MoO3 nanoneedles were prepared as intermediates. The layered magnesiated alpha-MoO3 has been characterized by X-ray powder diffraction (XRD) and scanning electron microscopy (SEM). And the electrochemical performance as cathode materials in Li-ion battery shows that the magnesiated alpha-MoO3 had a capacity of 300 mAh x g(-1) at the first discharge and a fairly good cycle performance at the current density of 200 mA x g(-1). The great improvement indicates that the magnesiation method is an effective way to enhance electrochemical performance for the layered cathode materials.
Improvement of Lithium Storage Performance of Molybdenum Trioxide by A Synergistic Effect of Surface Coating and Oxygen Vacancies

Chenglong Yang,Xiaowu Liu,Zhenzhong Yang,Lin Gu,Yan Yu

DOI: https://doi.org/10.1002/admi.201600730

IF: 5.4

2016-01-01

Advanced Materials Interfaces

Abstract:3D hierarchical flower‐like carbon coated MoO3−x nanosheets (denoted as MoO3−x NS@C) have been successfully fabricated by a simple hydrothermal method. When used as anode for Li‐ion batteries, the MoO3−x NS@C electrode exhibits excellent cycle performance and outstanding rate capabilities. The charge capacity can reach 1025 mAh g−1 over 150 cycles, and 62% of the charge capacity is retained when the current density increases to 2000 mA g−1. The improved lithium storage performance of MoO3−x NS@C is attributed to the synergistic effect of oxygen vacancies and the carbon coating, which not only enhance the electric conductivity and Li‐ion diffusion coefficient but also lead to superior structural stability and cyclability of the MoO3−x NS@C electrode during repeated lithiation/delithiation process.
Electrochemical Behavior of Alpha-Moo3 Nanorods As Cathode Materials for Rechargeable Lithium Batteries.

Zhenhai Wen,Qiang Wang,Jinghong Li

DOI: https://doi.org/10.1166/jnn.2006.356

2006-01-01

Journal of Nanoscience and Nanotechnology

Abstract:The electrochemical properties of alpha-MoO3 nanorods, which were synthesized via a solution-based method and following calcination, have been reported as a cathode material for rechargeable lithium batteries. Detailed lithium-insertion process of the material has been conducted by means of cyclic voltammetry, galvanostatic method, and impedance technique, and superior features associated with the nanostructures have been observed. The alpha-MoO3 nanorods exhibited an initial discharge capacity of 271.8 mAh/g under a current density of 0.1 mA/cm2 in the range 1.0 approximately 3.0 V, which nearly approached the theoretical capacity 280 mAh/g. Comparison of the structural and electrochemical characteristics with those of bulk alpha-MoO3 suggests the enhanced electrochemical performance might be related to the rodlike structure and increased edge and corner effects.
In Situ Synthesis of MoO3 by Surface Oxidation of Mo2C (MXene) for Stable Near-Surface Reactions in Aqueous Aluminum-Ion Battery

Yi Wang,Tanci Wu,Yong Lu,Wenming Zhang,Zhanyu Li

DOI: https://doi.org/10.1002/anie.202416032

2024-10-21

Abstract:Molybdenum trioxide (MoO3) is a promising positive electrode material for aqueous aluminum-ion batteries (AAIBs) due to its high theoretical capacity. However, MoO3 faces several challenges in an aqueous electrolyte, such as easy dissolution of reaction products, volume expansion, and low conductivity, which severely limit its application in aqueous batteries. In this work, we effectively increased the overall conductivity of the electrode by in situ growing MoO3 on the Mo2C MXene layer. MXene can effectively inhibit the dissolution and structural loss of MoO3 reaction products. Additionally, the coordination effect of Mo2C and MoO3 achieves a stable near-surface reaction on the MXene laminates, resulting in the Mo2C/MoO3 composite exhibiting excellent aluminum storage properties (123.5 mAh/g after 200 cycles at 0.4 A/g). The energy storage mechanism of H+/Al3+ co-insertion/extraction was elucidated through ex situ characterization, and the promotion effect of Mo2C on MoO3 reaction kinetics was verified by density functional theory (DFT) calculations. This work provides new insights into improving the stability of AAIBs cathodes and extends the application of Mo-based MXene in aqueous batteries.
In Situ Growth of MOFs on the Surface of Si Nanoparticles for Highly Efficient Lithium Storage: Si@MOF Nanocomposites As Anode Materials for Lithium-Ion Batteries.

Yuzhen Han,Pengfei Qi,Xiao Feng,Siwu Li,Xiaotao Fu,Haiwei Li,Yifa Chen,Junwen Zhou,Xingguo Li,Bo Wang

DOI: https://doi.org/10.1021/am5081937

IF: 9.5

2015-01-01

ACS Applied Materials & Interfaces

Abstract:A simple yet powerful one-pot strategy is developed to prepare metal-organic framework-coated silicon nanoparticles via in situ mechanochemical synthesis. After simple pyrolysis, the thus-obtained composite shows exceptional electrochemical properties with a lithium storage capacity up to 1050 mA h g(-1), excellent cycle stability (>99% capacity retention after 500 cycles) and outstanding rate performance. These characteristics, combined with their high stability and ease of fabrication, make such Si@MOF nanocomposites ideal alternative candidates as high-energy anode materials in lithium-ion batteries.
Atomically Intercalating Tin Ions into the Interlayer of Molybdenum Oxide Nanobelt Toward Long-Cycling Lithium Battery

Chuanqiang Wu,Hui Xie,Dongdong Li,Daobin Liu,Shiqing Ding,Shi Tao,Heng Chen,Qin Liu,Shuangming Chen,Wangsheng Chu,Bo Zhang,Li Song

DOI: https://doi.org/10.1021/acs.jpclett.7b03374

2018-01-01

Abstract:Atomic intercalation of different agents into 2D layered materials can engineer the intrinsic structure on the atomic scale and thus tune the physical and chemical properties for specific applications. Here we successfully introduce tin (Sn) atoms into the interlayer of α-MoO3 nanobelts forming a new MoO3-Sn intercalation with ultrastable structure. Combining with theoretical calculations, our synchrotron radiation-based characterizations and electron microscope observations clearly reveal that the intercalated Sn atoms could bond with five O atoms, forming a pentahedral structure. Subsequently, the Sn-O bonds induce a less distorted [MoO6] octahedral structure, resulting in a unique structure that is distinct with pristine α-MoO3 or any other molybdenum oxides. Employed as anode for lithium-ion battery, the as-prepared MoO3-Sn nanobelts display a much higher capacity of 520 mAhg-1 at 500 mAg-1 than α-MoO3 nanobelts (291 mAhg-1), with a Coulombic efficiency of 99.5%. Moreover, owing to the strong intercalation from Sn ions, the MoO3-Sn nanobelts pose superior cyclability, durability, and reliability.
In Situ Synthesis of MoO 3 by Surface Oxidation of Mo 2 C (MXene) for Stable Near‐Surface Reactions in Aqueous Aluminum‐Ion Battery

Yi Wang,Tianci Wu,Yong Lu,Wenming Zhang,Zhanyu Li

DOI: https://doi.org/10.1002/anie.202416032

2024-10-22

Angewandte Chemie International Edition

Abstract:Molybdenum trioxide (MoO3) is a promising positive electrode material for aqueous aluminum-ion batteries due to its high theoretical capacity. However, MoO3 faces several challenges in an aqueous electrolyte, such as easy dissolution of reaction products, volume expansion, and low conductivity, which severely limit its application in aqueous batteries. In this work, we effectively increased the overall conductivity of the electrode by in-situ growing MoO3 on the Mo2C MXene layer. MXene can effectively inhibit the dissolution and structural loss of MoO3 reaction products. Additionally, the coordination effect of Mo2C and MoO3 achieves a stable near-surface reaction on the MXene laminates, resulting in the Mo2C/MoO3 composite exhibiting excellent aluminum storage properties (123.5 mAh/g after 200 cycles at 0.4 A/g). The energy storage mechanism of H+/Al3+ co-insertion/extraction was elucidated through non-in-situ characterization, and the promotion effect of Mo2C on MoO3 reaction kinetics was verified by density functional theory calculations. This work provides new insights into improving the stability of AAIB cathodes and extends the application of Mo-based MXene in aqueous batteries.

chemistry, multidisciplinary
MoO3 Nanobelts/Reduced Graphene Oxide (RGO) Composites as a High-Performance Anode Material for Lithium Ion Batteries

Ji Wen-Xu,Wu Di,Yang Rong,Ding Wei-Ping,Peng Lu-Ming

DOI: https://doi.org/10.11862/CJIC.2015.111

2015-01-01

Chinese journal of inorganic chemistry

Abstract:MoO3 nanobelts/RGO composites were obtained through a facile and efficient hydrothermal procedure by using organic compound sodium salicylate as both structure-directing agent and reducing agent. The crystal structure, morphologies and electrochemical performances of the as-prepared samples were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy, galvanostatic charge/discharge test and electrochemical impedance spectroscopy (EIS). The hybrid material shows a high specific capacity of 1 000 mAh.g(-1) with a good cycling stability as an anode material for lithium ion batterie, which has a much enhanced performance compared to bare MoO3 nanobelts.
Molybdenum Nitride/N-Doped Carbon Nanospheres for Lithium-O-2 Battery Cathode Electrocatalyst

Kejun Zhang,Lixue Zhang,Xiao Chen,Xiang He,Xiaogang Wang,Shanmu Dong,Lin Gu,Zhihong Liu,Changshui Huang,Guanglei Cui

DOI: https://doi.org/10.1021/am400209u

IF: 9.5

2013-01-01

ACS Applied Materials & Interfaces

Abstract:Molybdenum nitride/N-doped carbon nanospheres (MoN/N-C) are synthesized by hydrothermal method followed by ammonia annealing. The as-prepared MoN/N-C nanospheres manifest considerable electrocatalytic activity toward oxygen reduction reaction in nonaqueous electrolytes because of its nanostructure and the synergetic effect between MoN and N-C. Furthermore, the MoN/N-C nanospheres are explored as cathode catalyst for Li-O-2 batteries with tetra-(ethylene glycol) dimethyl ether as the electrolyte. The assembled batteries deliver alleviated overpotentials and improved battery lifespan, and their excellent performances should be attributed to the unique hierarchical structure and high fraction of surface active sites of cathode catalyst.

In Situ Synthesis and Electrochemical Performance of MoO3-x Nanobelts As Anode Materials for Lithium-Ion Batteries.

In-situ TEM Experiments and First-Principles Studies on the Electrochemical and Mechanical Behaviors of Α-Moo3 in Li-ion Batteries

Boosting the electrochemical performance of MoO 3 anode for long-life lithium ion batteries: Dominated by an ultrathin TiO 2 passivation layer

Oxygen Vacancy-Enriched MoO3−x Nanobelts for Asymmetric Supercapacitors with Excellent Room/low Temperature Performance

An Electrochemical Investigation on (moo3+pvp+pva) Nanobelts for Lithium Batteries

Probing Lithium Storage Mechanism Of Moo2 Nanoflowers With Rich Oxygen-Vacancy Grown On Graphene Sheets

Facile preparation of MoO 3 @Mo 2 CT x nanocomposite with high lithium storage performance by in situ oxidation

Synergistic effect of molybdenum dioxide wrapped nitrogen doped carbon nanotubes in binder-free anodes for enhanced lithium storage properties

Probing Lithium Storage Mechanism of MoO<sub>2</sub> Nanoflowers with Rich Oxygen-Vacancy Grown on Graphene Sheets

Synthesis, Characterization and Lithium-Storage Performance of MoO2/carbon Hybrid Nanowires

Nanocomposite of ultra-small MoO2 embedded in nitrogen-doped carbon: In situ derivation from an organic molybdenum complex and its superior Li-Ion storage performance

Preparation of Carbon Coated Moo2 Nanobelts and Their High Performance As Anode Materials for Lithium Ion Batteries

Facile Synthesis of Magnesiated Alpha-Moo3 and Its Electrochemical Performance in Li-ion Batteries.

Improvement of Lithium Storage Performance of Molybdenum Trioxide by A Synergistic Effect of Surface Coating and Oxygen Vacancies

Electrochemical Behavior of Alpha-Moo3 Nanorods As Cathode Materials for Rechargeable Lithium Batteries.

In Situ Synthesis of MoO3 by Surface Oxidation of Mo2C (MXene) for Stable Near-Surface Reactions in Aqueous Aluminum-Ion Battery

In Situ Growth of MOFs on the Surface of Si Nanoparticles for Highly Efficient Lithium Storage: Si@MOF Nanocomposites As Anode Materials for Lithium-Ion Batteries.

Atomically Intercalating Tin Ions into the Interlayer of Molybdenum Oxide Nanobelt Toward Long-Cycling Lithium Battery

In Situ Synthesis of MoO 3 by Surface Oxidation of Mo 2 C (MXene) for Stable Near‐Surface Reactions in Aqueous Aluminum‐Ion Battery

MoO3 Nanobelts/Reduced Graphene Oxide (RGO) Composites as a High-Performance Anode Material for Lithium Ion Batteries

Molybdenum Nitride/N-Doped Carbon Nanospheres for Lithium-O-2 Battery Cathode Electrocatalyst