Abstract:Poor cycle and rate performance caused by volume effects and sluggish kinetics is the main bottleneck for most lithium-ion battery (LIB) anode materials run on the conversion reaction. Although nanostructure engineering has shown to be an effective method to reduce the undesirable volume effects, cycling instability usually remains in nanostructured electrodes owning to particle aggregation in discharge and loss of active materials in charge. Here, to make these kinds of materials practical, we have developed a structure of ultrafine MoO2 nanoparticles (<3 nm) confined by a conductive carbon nanosheet matrix (MoO2/C). Instead of running on the conversion mechanism, the Li storage in the MoO2/C composite is through a two-step mechanism in discharge: intercalation followed by the formation of metallic Li, acting as a hybrid host for both Li ion intercalation and metallic Li plating. The Li-storage mechanism has been revealed by in situ X-ray diffraction analysis and in situ scanning transmission electron microscopy with corresponding electron energy loss spectrum analysis, which explains the natural origin of such high capacity along with good cyclability. This unique MoO2/C structure exhibits an excellent discharge capacity (810 mAh g–1 at 200 mA g–1) and cyclability (75% capacity retention over 1000 cycles). The carbon sheet plays a vital role in both a conductive network and a structure supporter with a robust confining effect that keeps the size of MoO2 uniformly under 3 nm even after high-temperature calcination. Our finding provides insights for the design of next-generation LIB anode materials with high capacity and longevity.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c10833?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c10833</a>.Descriptions of materials synthesis; characterization details; electrochemical measurements; the XRD pattern and FTIR for flower-like Mo–PDA composites; the SEM images of the MoO2 nanobelts; the TGA curves of the MoO2/C and MoO2 nanobelts; CV curves, galvanostatic discharge–charge profiles, and rate performance of the MoO2 nanobelts; ex situ STEM and in situ STEM images of MoO2/C after lithiation (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10833/suppl_file/am0c10833_si_001.pdf">PDF</a>)In situ TEM video (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10833/suppl_file/am0c10833_si_002.avi">AVI</a>)This article has not yet been cited by other publications.

Nanocomposite of ultra-small MoO2 embedded in nitrogen-doped carbon: In situ derivation from an organic molybdenum complex and its superior Li-Ion storage performance

Nanoisland-like MoO2 Embedded in N-Doped Carbon Via Mo–N Bonds for Li-Ion Storage

Strongly Surface-Bonded MoO2@Carbon Nanocomposites by Nitrogen-Doping with Outstanding Capability for Fast and Stable Li Storage

Ultrafine molybdenum oxycarbide nanodots encapsulated in N,P co-doped carbon nanofibers as an advanced anode material for lithium-ion batteries

Controlled Synthesis of Ultrafine β-Mo2C Nanoparticles Encapsulated in N-Doped Porous Carbon for Boosting Lithium Storage Kinetics

Atomic Mo-NC-sourced robust MoO3/C nanocomposite for high-performance Li-ion storage

Synergistic effect of molybdenum dioxide wrapped nitrogen doped carbon nanotubes in binder-free anodes for enhanced lithium storage properties

Three-dimensionally ordered mesoporous multicomponent (Ni, Mo) metal oxide/N-doped carbon composite with superior Li-ion storage performance

Ultrafast Li-storage of MoS 2 Nanosheets Grown on Metal-Organic Framework-Derived Microporous Nitrogen-Doped Carbon Dodecahedrons

Confining Ultrafine MoO 2 in a Carbon Matrix Enables Hybrid Li Ion and Li Metal Storage

Conformal Conversion of Polyphosphazene@Sb2MoO6 Nanowires to N/S-Doped/Carbon-Coated SbPO4/MoOx for High-performance Lithium Storage

Ultrasmall Fe3O4 nanodots within N-doped carbon frameworks from MOFs uniformly anchored on carbon nanowebs for boosting Li-ion storage

Interconnected MoO 2 /MoS 2 @NC nanosheets as anodes with high-rate and long-life for lithium-ion and sodium-ion batteries

Strong metal oxide-support interaction in MoO 2 / N -doped MCNTs heterostructure for boosting lithium storage performance

Necklace-like carbon nanofibers encapsulating MoO2 nanospheres with Mo–C bonding for stable lithium-ion storage

Facile synthesis of Mo2N quantum dots embedded N-doped carbon nanosheets composite as advanced anode materials for lithium-ion batteries

Interconnected Moo2 Nanocrystals with Carbon Nanocoating As High-Capacity Anode Materials for Lithium-Ion Batteries

Engineering Ag nanoparticles and amorphous MoOx on three dimensional N-doped carbon networks for enhanced lithium storage performance

High‐Capacity and Kinetically Accelerated Lithium Storage in MoO 3 Enabled by Oxygen Vacancies and Heterostructure

Facile preparation of MoO 3 @Mo 2 CT x nanocomposite with high lithium storage performance by in situ oxidation

Preparation of porous MoO2@C nano-octahedrons from a polyoxometalate-based metal–organic framework for highly reversible lithium storage