Abstract:Build-up/wash-off models were originally developed for small-scale laboratory facilities with uniform properties. The effective translation of these models to catchment scale necessitates the meticulous calibration of model parameters. The present study combines the Mat-SWMM tool with a genetic algorithm (GA) to improve the calibration of build-up and wash-off parameters. For this purpose, Mat-SWMM was modified to equip it with the capacity to provide comprehensive water quality analysis outcomes. Additionally, this research also conducts a comparative examination of two distinct types of objective functions in the optimization. Rather than depending on previous literature, this study undertook a numerical campaign to ascertain an appropriate range for the relevant parameters within the case study, thereby ensuring the optimization algorithm's efficient functionality. This research also implements an integrated event calibration approach, i.e., a novel method that calibrates all rainfall events collectively, thus improving systemic interaction representation and model robustness. The findings indicate that employing this methodology significantly enhances the reliability of the outcomes, thereby establishing a more robust procedure. The first objective function (TSS instantaneous less squared difference function, OF 1), which is widely employed in the literature, was designed to minimize the difference between observed and predicted instantaneous Total Suspended Solids (TSS) concentrations. In contrast, the second function (mass and mass peak consistency function, OF 2) considers integral model outputs, i.e., the overall mass balance, the time of the peak mass flow rate, and its intensity. The analysis of the outputs revealed that both objective functions demonstrated sufficient performance. OF 1 provided slightly better performance in predicting the TSS concentrations, whereas OF 2 demonstrated superior ability in capturing global event characteristics. Notably, the optimal parameter set identified through OF 2 aligned with the physically plausible ranges traditionally recommended in technical manuals for urban catchments. In contrast, OF 1's optimal set necessitated an expansion in the acceptable parameter ranges. Finally, from a computational burden viewpoint, OF 1 demanded a significantly higher number of function evaluations, thus implying an escalating computational cost as the range expands. Conversely, OF 2 necessitated fewer evaluations to converge toward the optimal solution.

Comparative implementation of melody search in auto-calibrating SWAT

Impact Of Two Calibration Strategies On Flow Simulation In Qiantang River Basin, China

Exploring the Performance of Ensemble Smoothers to Calibrate Urban Drainage Models

Comparison of multi-objective and single objective calibration for SWAT model: a case study on Musi river basin, India

Simulation of water balance equation components using SWAT model in Samalqan Watershed (Iran)

Application of SWAT model and SWAT-CUP software in simulation and analysis of sediment uncertainty in arid and semi-arid watersheds (case study: the Zoshk–Abardeh watershed)

Multi-gauge calibration comparison for simulating streamflow across the Major River Basins in Madagascar: SWAT + Toolbox, R-SWAT, and SWAT + Editor Hard calibration

A COMPARISON OF SIMULATED RUNOFF BASED ON GROUND RAIN GAUGES AND PERSIANN-CDR SATELLITE PRECIPITATION RECORDS USING SWAT MODEL

Enhanced SWAT calibration through intelligent range-based parameter optimization

Multi-objective synchronous calibration and Pareto optimality of runoff and sediment parameters in an arid and semi-arid watershed

SWAT and IHACRES models for the simulation of rainfall-runoff of Dez watershed

An automatic parameter calibration method for the SWAT model in runoff simulation

Optimization of a SWAT model by incorporating geological information through calibration strategies

Calibration and validation of SWMM model in two urban catchments in Athens , Greece

Multi-station calibration strategy for evaluation and sensitivity analysis of the snowmelt runoff model using MODIS satellite images

Automatic calibration of SWMM parameters based on multi-objective optimisation model

Calibration, validation and uncertainty analysis of a SWAT water quality model

SWAT manual calibration and parameters sensitivity analysis in a semi-arid watershed in North-western Morocco

New optimization strategies for SWMM modeling of stormwater quality applications in urban area

Impact of Direct Soil Moisture and Revised Soil Moisture Index Methods on Hydrologic Predictions in an Arid Climate

Comparative Performance Evaluation of HEC-HMS and SWAT Models in Stream Flow Simulation: the Case of Bilate and Gidabo Watersheds, Ethiopia