Abstract:Ice formation on concrete surfaces significantly challenges productivity, economic growth, and safety in diverse industrial sectors. Superhydrophobic coatings represent an effective solution to delay ice formation, although their functionality deteriorates under repeated freeze–thaw cycles. To address this issue, carbon nanotubes (CNTs) are frequently employed due to their exceptional photothermal conversion and mechanical properties, which contribute to extending the sustainability of the superhydrophobic coatings. However, the chemical inertness of CNTs often necessitates complex reactions to modify their functionalization. In this study, we have invented a simple method involving the sequential growth of silica on the surface of CNTs and the hydrophobic modification of the silica surface to enhance CNT functionality. These CNTs/SiO2 functionalized nanoparticles were then incorporated into an epoxy resin using a simple spray technique, resulting in a superhydrophobic and photothermal coating on concrete. To fine-tune the coating's properties, we explored the effects of varying the doping levels of the nanoparticles on the surface morphology, roughness, and wettability of the CNT/SiO2-EP coatings. The optimal level of hydrophobicity was achieved by doping the coatings with 300 mg of functionalized nanoparticles, yielding an impressive contact angle of 159.6°. The integration of functionalized nanoparticles into the epoxy matrix not only enhances hydrophobicity but also improves mechanical robustness and abrasion resistance by creating multiscale surface roughness. Additionally, the coating exhibits outstanding chemical stability even under extreme conditions. One of the most significant advantages of these coatings is their ability to extend the ice nucleation time significantly. This effect is primarily attributed to the superior superhydrophobicity of the nanoparticles and the remarkable photothermal conversion capability of the CNTs. Upon exposure to Xenon lamp radiation, the ice droplets rapidly melt, underscoring the impressive performance of these coatings in preventing ice formation.

Durable and Scalable Candle Soot Icephobic Coating with Nucleation and Fracture Mechanism

A Strategy of Candle Soot-Based Photothermal Icephobic Superhydrophobic Surface

Metallic Hierarchical Structures Uniformly Covered with WC@PDMS Composite Coatings Toward Comprehensively Durable Superhydrophobic Surfaces

Crack-Initiated Durable Low-Adhesion Trilayer Icephobic Surfaces with Microcone-Array Anchored Porous Sponges and Polydimethylsiloxane Cover.

Facile Approach for Designing Icephobic Coatings Using Polymers/Silica Nanoparticle Composites via Self‐Formation of Superhydrophobic Surfaces

Facile One-Step Fabrication of PHC/PDMS Anti-Icing Coatings with Mechanical Properties and Good Durability

Self-regulated Secretory Materials for Long-Term Icephobicity

Icephobic Coating Based on Epoxy/Polydimethylsiloxane Interpenetrating Polymer Network Gel

Durable Hydrate-phobic Coating with In Situ Self-Replenishing Hydrocarbon Barrier Films for Low Clathrate Hydrate Adhesion.

Spraying Fabrication of Durable and Transparent Coatings for Anti-Icing Application: Dynamic Water Repellency, Icing Delay, and Ice Adhesion

3D Liquid-Based Porous Coating Integrated with Oleophilic MXene Nanoflakes for Durable Ultra-Low Ice Adhesion and Exceptional Photothermal Slippery Properties

Super-Hydrophobic/Icephobic Coatings Based on Silica Nanoparticles Modified by Self-Assembled Monolayers

Scalable and durable polymeric icephobic and hydrate-phobic coatings

Icephobic Durability of Molecular Brush-Structured PDMS Soft Coatings.

A Sustainable Superhydrophobic and Photothermal Coatings for Anti-Icing Application on Concrete with a Simple Method for CNTs/SiO2 Modification

A superhydrophobic coating harvesting mechanical robustness, passive anti-icing and active de-icing performances

Durable Design of Superhydrophobic Coatings with TiO2 Particles and Al2O3 Whiskers for the Enhanced Anti-icing Performance

Facile Fabrication of Robust Superhydrophobic Ice Shedding Coating with Superior Corrosion Resistance and Temperature Durability

A superhydrophobic Fe 3 O 4 @MSN-PDMS based composite coating with icephobicity, long-term durability and self-healing property for anti-/de-icing

Facile approach to design a stable, damage resistant, slippery, and omniphobic surface

Easily Applicable Superhydrophobic Composite Coating with Improved Corrosion Resistance and Delayed Icing Properties