Abstract:Shorter technology enable us to create higher speed oscillators which can provide better resolution in time domain. Therefore, a simple ADC using voltage (or current) controlled oscillator (VCO) and a counter can be implemented using this approach. Conceptually, the operation order in this ADC is similar to a conventional ΣΔ modulator. The CCO integrates frequency to produce output in the form of phase. And the number of stages in the CCO determines the quantization levels (or phase resolution). The difference of quantized phase output produces a frequency proportional to the input signal. Therefore, unlike, a conventional ΣΔ modulator no feedback is required for a first order noise shaping. In order to achieve a low power for moderate performance two key techniques have been used: a) a cross-coupled voltage to current (V/I) converter to achieve non-linearity cancellation (mainly 3rd-order harmonic), and b) a stack structure to share current between V/I converter and CCO to reduce power. This ADC has been simulated using models of typical 130nm CMOS technology. In SPICE simulation, SQDR/SFDR of 67.5 dB/71 dB is achieved over a total signal bandwidth of 5 MHz for an input swing of 300mV (Vpp) for typical corner at room temperature. The analog blocks consumed a total of 96.5μW from a regulated 1.2V supply, whereas, the digital blocks consumed an estimated power of 1.1 mW. Since, the major circuit blocks are digital in nature, the presented circuit is highly amenable with technology scaling.

Advances in Voltage-Controlled-Oscillator-Based ΔΣ ADCs.

A Survey of Voltage-Controlled-oscillator-based ΔΣ ADCs

A Scaling Compatible, Synthesis Friendly VCO-based Delta-Sigma ADC Design and Synthesis Methodology

Low-power Scaling-friendly Ring Oscillator based ΔΣ ADC.

A Synthesis Friendly VCO-Based Delta-Sigma ADC with Process Variation Tolerance

A Purely-Vco-based Single-Loop High-Order Continuous-Time ΣΔ ADC.

Low-Power Scaling-Friendly Ring Oscillator Based Delta Sigma Adc

A Purely-Vco-Based Single-Loop High-Order Continuous-Time Sigma Delta Adc

Vco-Based Continuous-Time Sigma Delta Adc Based on A Dual-Vco-Quantizer-Loop Structure

A Second-Order Purely VCO-Based CT $\delta\sigma$ ADC Using a Modified DPLL Structure in 40-Nm CMOS

A Second-Order VCO-Based ΔΣ ADC with Fully Digital Feedback Summation.

A 0.04-Mm2 0.9-Mw 71-Db SNDR Distributed Modular AS ADC with VCO-based Integrator and Digital DAC Calibration

A Synthesizable 0.0060mm2 VCO-Based Delta Sigma Modulator with Digital Tri-level Feedback Scheme.

A VCO Based Continuous Time Delta Sigma ADC with 10mhz BW 55db SNR and 42db SNDR

A 1.8mW 2MHz-BW 66.5dB-SNDR ΔΣ ADC using VCO-based integrators with intrinsic CLA

Analysis of VCO-Based Continuous-Time ΣΔ ADCs Using a Subset of Phases as the Feedback Signal

An 81.5Db-Dr 1.25Mhz-Bw VCO-Based CT ΔΣ ADC with Double-PFD Quantizer

A PVT Compensated Ring VCO with FVC-Assisted Digital Background Calibration

Second-order VCO-based ΔΣ ADC Using a Modified DPLL

A 1.2 mW 67.5 dB SQDR VCO-based ΣΔ ADC with Non-linearity Cancellation Technique

A Two-stage VCO With Extra Wide Tuning Range