Abstract:Hydraulic fracturing has become an essential stimulation treatment for improving the development efficiency of low-permeability oil reservoirs. However, fracturing fluid inevitably causes reservoir damage. This study proposed a combined method of microscopic and macroscopic experiments to investigate the nature of formation damage of fracturing fluid by quantifying its influence on porosity, permeability, and pore structure. Nuclear magnetic resonance technology combined with core flooding test and parallel sample comparison method was applied to quantitatively evaluate the damage degree and identify the main damage types of hydroxypropyl guar (HPG) fracturing fluid and slickwater fracturing fluid. The microscopic damage mechanisms of these fracturing fluids were analyzed by thin section petrography, X-ray diffraction, rate-controlled mercury intrusion, scanning electron microscopy, and wettability tests. The results show that the total permeability damage degree of HPG fracturing fluid filtrate is 30.43%, of which water sensitivity, water lock, and macromolecule adsorption account for 6.06%, 23.26%, and 1.11%, respectively. Water lock is the major damage factor. Regarding the damage of slickwater fracturing fluid filtrate, water sensitivity causes the severest damage, corresponding to 39.08% of core permeability loss, whereas macromolecule adsorption and water lock contribute 13.21% and 0.97%, respectively. Water sensitivity damage causes reduced porosity, decreased permeability, and narrower pores, resulting from hydration, swelling, dispersion and migration of clay minerals. Water lock damage increases the movable pore volume, decreases the permeability, increases the pore radius, decreases the throat radius, and increases the pore throat ratio, which increases the flow resistance to the oil phase. The magnitude of water lock damage is closely related to the surfactant content and performance, rock wettability, and pore throat radius ratio. Macromolecule adsorption damage leads to a decrease in permeability, a reduction in the number of large pores, an increase in the number of small throats, and an increase in the pore throat radius ratio due to the absorption and retention of macromolecules on the surfaces of the pores and throats. Increasing the flowback volume of slickwater fracturing fluid can recover part of the macromolecule absorption damage. This research can provide a reliable reference for the optimization of fracturing fluid performance, enhancement of the fracturing effect and reservoir protection of low-permeability reservoirs.

Reducing Hydroxypropyl Guar Gum Adsorption on Rock by Silica Nanoparticles for Tight Reservoir Damage Remediation

Experimental investigation on the high-pressure sand suspension and adsorption capacity of guar gum fracturing fluid in low-permeability shale reservoirs: factor analysis and mechanism disclosure

Study on the Mechanism of Nanoemulsion Removal of Water Locking Damage and Compatibility of Working Fluids in Tight Sandstone Reservoirs

Water Management and Oil Recovery Improvement Performance of High-Strength Preformed Particle Gels in Fractured Conglomerate Reservoirs

Investigation on the microscopic damage mechanism of fracturing fluids to low-permeability sandstone oil reservoir by nuclear magnetic resonance

Design of facile technology for the efficient removal of hydroxypropyl guar gum from fracturing fluid

Gas Sorption and Diffusion Damages by Guar-Based Fracturing Fluid for CBM Reservoirs

Study of a low-damage efficient-imbibition fracturing fluid without flowback used for low-pressure tight reservoirs

A Novel Fracturing Fluid Based on Functionally Modified Nano-Silica-Enhanced Hydroxypropyl Guar Gel

Preparation, Evaluation and Field Application of Thermally Induced Crosslinked Polymer Gel Leakage Plugging Agent

Cause analysis and solutions of water blocking damage in cracked/non-cracked tight sandstone gas reservoirs

Carboxyl/alkyl composite silica-based amphiphilic nanoparticles enhanced spontaneous imbibition of low permeability sandstone rocks at reservoir conditions

Coupled Computational and Laboratory Investigations of Interface Interactions between Binary Polymers, Hydroxypropyl Guar, and Potassium Formate for Crosslinked Hydraulic Fracturing Fluids

Comparative Studies on Hydraulic Fracturing Fluids for High-Temperature and High-Salt Oil Reservoirs: Synthetic Polymer Versus Guar Gum

Influence of reservoir physical properties on guar gum fracturing fluid damage in unconventional tight reservoirs

Experimental Investigation of Hydraulic Fracturing Fluid Based on Pseudo Gemini Surfactant with Polysaccharide Addition

Adsorption polymer on reservoir rock and role of the nanoparticles, clay and SiO2

Preparation of Amphiphilic Janus-SiO2 Nanoparticles and Evaluation of the Oil Displacement Effect

Effect of a SILICA/HPAM Nanohybrid on Heavy Oil Recovery and Treatment: Experimental and Simulation Study

Novel approach to improve shale stability using super-amphiphobic nanoscale materials in water-based drilling fluids and its field application

Ultra-Stable Silica Nanoparticles as Nano-Plugging Additive for Shale Exploitation in Harsh Environments