Abstract:In this work, based on the diffraction principle of reflective blazed grating, the structure size of the convex spherical blazed grating unit is determined, the machining accuracy of the convex spherical blazed grating is formulated, the effects of tool nose radius and Poisson burr on the diffraction efficiency of the convex spherical blazed grating are analyzed, and the performances of cutting convex gratings with microcrystalline aluminum RSA6061 and RSA6061+ chemically plated NiP for two workpiece materials are compared. A convex spherical blazed grating with a radius of curvature R = 41.104 mm, substrate diameter 14 mm, grating density 53.97 line/mm, and blaze angle of roughly 3.8° is turned by a four-axis ultra-precision machining system by adjustment of the cutting tool, workpiece material, and cutting parameters, as well as modification of the layouts of the blazed grating on the convex sphere. The results of the testing of convex spherical blazed grating elements in both layouts show that the size error of the grating period is close for both layouts, the size error of grating height is smaller in the equal-along-arc layout, the blaze angle error in the equal-along-projection layout is only 0.74%, and the average roughness of the blazed surface is less than 5 nm to meet the processing quality requirements of the reflective convex spherical blazed grating. The greater the blaze angle accuracy of the blazed grating, the higher its diffraction efficiency, so the grating element with an equal-along-projection layout has a higher diffraction efficiency than the grating element with an equal-along-arc layout. RSA6061+ chemically plated NiP material is superior to RSA6061 material in Poisson burr height and blazed surface roughness, which is more suitable for Offner-type imaging spectrometers in the spectral range 0.95–2.5 μm (SWIR).

Optimized Highly Efficient Multilayer-Coated Blazed Gratings for the Tender X-ray Region.

High efficiency multilayer coated laminar gratings with high line density for tender X-ray region

Design of Large-Deflection-angle High-Diffraction-efficiency High-Dispersion Hybrid Gratings

Design and Fabrication of 1000 Line/Mm Soft X-Ray Freestanding Blazed Transmission Gratings

Design Optimization of a Periodic Microstructured Array Anode for Hard X-Ray Grating Interferometry.

Optimization Of A Variable-Angle Spherical Grating Monochromator

Fabrication of 1200 lp/mm Laminar gratings for 1 m Seya-Namioka monochromator at NSRL

Convex Blazed Grating of High Diffraction Efficiency Fabricated by Swing Ion-Beam Etching Method.

Extreme Ultraviolet and Soft X-Ray Diffraction Efficiency of a Blazed Reflection Grating Fabricated by Thermally Activated Selective Topography Equilibration

Design and fabrication of soft x-ray blazed diffraction gratings

Mo/Si multilayer-coated ruled blazed gratings for the soft-x-ray region

Ultra-Precision Cutting and Characterization of Reflective Convex Spherical Blazed Grating Elements

Fabrication of a high-quality, small blaze angle grating for visible short-wave infrared hyperspectral cameras

Soft x-ray high diffraction efficiency and spectral flux laminar-type W/B4C multilayer diffraction grating for 300–1000 eV

Higher dispersion and efficiency Bragg gratings for optical spectroscopy

The Optimization Design of Broadband Mid-Ir Grating

Fabrication of 1 200 Lp/mm Laminar Gratings for 1 M Seya-Namioka Monochromator at NSRL

Design and Fabrication of Silicon-Blazed Gratings for Near-Infrared Scanning Grating Micromirror

Design and analysis of broadband high-efficiency pulse compression gratings

High-Efficiency Multilayer-Coated Ion-Beam-Etched Blazed Grating in the Extreme-Ultraviolet Wavelength Region

Blazed Silicon Gratings for Soft X-Ray and Extreme Ultraviolet Radiation: the Effect of Groove Profile Shape and Random Roughness on the Diffraction Efficiency