Abstract:Trans-radial prosthesis is a wearable device that intends to help amputees under the elbow to replace the function of the missing anatomical segment that resembles an actual human hand. However, there are some challenging aspects faced mainly on the robot hand structural design itself. Improvements are needed as this is closely related to structure efficiency. This paper proposes a robot hand structure with improved features (four-bar linkage mechanism) to overcome the deficiency of using the cable-driven actuated mechanism that leads to less structure durability and inaccurate motion range. Our proposed robot hand structure also took into account the existing design problems such as bulky structure, unindividual actuated finger, incomplete fingers and a lack of finger joints compared to the actual finger in its design. This paper presents the improvements achieved by applying the proposed design such as the use of a four-bar linkage mechanism instead of using the cable-driven mechanism, the size of an average human hand, five-fingers with completed joints where each finger is moved by motor individually, joint protection using a mechanical stopper, detachable finger structure from the palm frame, a structure that has sufficient durability for everyday use and an easy to fabricate structure using 3D printing technology. The four-bar linkage mechanism is the use of the solid linkage that connects the actuator with the structure to allow the structure to move. The durability was investigated using static analysis simulation. The structural details and simulation results were validated through motion capture analysis and load test. The motion analyses towards the 3D printed robot structure show 70–98% similar motion range capability to the designed structure in the CAD software, and it can withstand up to 1.6 kg load in the simulation and the real test. The improved robot hand structure with optimum durability for prosthetic uses was successfully developed.

Feasibility of Ratchet–Pawl mechanism for trans-phalangeal finger prosthetic: a minimalistic design approach

Development of a Lightweight Prosthetic Hand for Patients with Amputated Fingers

Development of an Anthropomorphic Prosthetic Hand with Underactuated Mechanism

Highly Anthropomorphic Finger Design With a Novel Friction Clutch for Achieving Human-Like Reach-and-Grasp Movements

Development and Implementation of an Anthropomorphic Underactuated Prosthesis with Adaptive Grip

Mechanical Design and Feasibility of a Finger Exoskeleton to Support Finger Extension of Severely Affected Stroke Patients

Design of robotic finger using twisted string actuator with modular passive return rotational joints to achieve high grasping force: Application to wearable sixth finger

A Novel Tactile Sensing Array with Elastic Steel Frame Structure for Prosthetic Hand.

Design of novel test rig for prosthetic finger distal interphalangeal and phalanx strengths

Optimal design of dexterous prosthetic hand with five-joint thumb and fingertip tactile sensors based on novel precision grasp metric

Soft Wearable Body-Powered Hydraulic Actuation System for a Prosthetic Finger Design

Development and Control of a Multifunctional Prosthetic Hand with Shape Memory Alloy Actuators

3D Printed Robot Hand Structure Using Four-Bar Linkage Mechanism for Prosthetic Application

A Compliant Four-bar Linkage Mechanism that Makes the Fingers of a Prosthetic Hand More Impact Resistant

A practical 3D-printed soft robotic prosthetic hand with multi-articulating capabilities

Design of a Lightweight Single-Actuator Multi-Grasp Prosthetic Hand With Force Magnification

An original hybrid-architecture finger mechanism for wearable hand exoskeletons

Step by step enhancement of aesthetics for distal phalangeal prosthetic replacement using neoteric stamp technique: A case report

Novel differential mechanism enabling two DOF from a single actuator: Application to a prosthetic hand

A Monolithic Cable-Driven Compliant Wrist for Prosthetic Arms

Human Hand Anatomy-Based Prosthetic Hand