Abstract:Finger amputations are the most common upper limb amputation, and they occur approximately 100 times more often than hand amputations. We developed a prosthetic hand for amputees with a thumb and metacarpal. In this case of amputation, the installation of actuators and electrical components is difficult because space is considerably limited owing to the residual metacarpal. This design issue is solved by installing actuators vertically between finger modules and the mounting part where the electrical parts are embedded. With this design, the arrangement between the palm of the patient and the fingers of the prosthetic hand can be adjusted as well. Weight is also an especially important design issue in the development of a practical prosthetic hand because the patient perceives that weight. Most prosthetic hands are attached to the residual limb of the amputee by compressing the contact surface between the product and the amputated body part of the patient. Heavy weight causes users to feel discomfort and fatigue over extended periods of usage. In this study, all frames used in the proposed prosthetic hand were fabricated from nylon using multi-jet-fusion three-dimensional printing. As a result, the weight of the developed prosthetic hand was only 152.32 g but still had the desired strength and stiffness. Each prosthetic finger has four-degree-of-freedom. The distal interphalangeal, proximal interphalangeal, and metacarpophalangeal joints are coupled and driven by power from an actuator, which is transferred to each joint through the tendons. Adduction, abduction, and self-adaptive grasping motions were passively realized using linear and torsional springs. The prototype was fabricated based on these design concepts and functions, and its functionality was verified in experiments using diverse objects.

Development and Control of a Multifunctional Prosthetic Hand with Shape Memory Alloy Actuators

Development of a Multisensory Underactuated Prosthetic Hand With Fully Integrated Electronics

Design and Control of a Multisensory Five-Finger Prosthetic Hand

Development of a Multi-Dof Prosthetic Hand with Intrinsic Actuation, Intuitive Control and Sensory Feedback.

Development of a Multi-DOF Anthropomorphic Prosthetic Hand

Biomechatronic Design and Control of an Anthropomorphic Artificial Hand for Prosthetic Applications

Development and Implementation of an Anthropomorphic Underactuated Prosthesis with Adaptive Grip

Design of an Underactuated Prosthetic Hand with Flexible Multi-Joint Fingers and EEG-Based Control

Development of an Anthropomorphic Prosthetic Hand with Underactuated Mechanism

The Development on a New Biomechatronic Prosthetic Hand Based on Under-actuated Mechanism

Design and Fabrication of a Soft Robotic Hand with Embedded Actuators and Sensors

Development of an Affordable Myoelectric Hand for Transradial Amputees

A Modular Multisensory Prosthetic Hand

Development of a biomimetic transradial prosthetic arm with shape memory alloy muscle wires

Force and motion control of a tendon-driven hand exoskeleton actuated by shape memory alloys

An Underactuated Prosthetic Hand with Coupled Metacarpophalangeal Joints

A Five-fingered Underactuated Prosthetic Hand System

Design And Control Of An Anthropomorphic Prosthetic Hand With A Cosmesis

Development of a Lightweight Prosthetic Hand for Patients with Amputated Fingers

Research on Novel Shape Memory Alloy Multi-Fingered Humanoid Hand

Development of a Prototype Over-Actuated Biomimetic Prosthetic Hand