Abstract:A range of Fe-Cr-Ni alloys are used in nuclear power plants due to their high mechanical strength and corrosion resistance. As a major component of these alloys, Ni contributes to the formation of austenite microstructures. In many nuclear reactor applications the alloys are exposed to ionizing radiation (g-rays) that can continuously decompose water to a range of highly redox active species (such as •OH, H2O2, O2). The change in water chemistry induced by radiation can affect both the general and localized corrosion behaviour of these alloys. In particular, its influence on the susceptibility of an alloy to localized corrosion such as crevice and stress corrosion cracking (SCC) are important for assessment of reactor component aging. As well, corrosion products that dissolve into the reactor coolant can be transported to the reactor core where they can be neutron activated. This can create a radiological hazard for reactor maintenance personnel. Thus, quantifying the rate of general corrosion and the corrosion product transport in a reactor are important safety, operation and maintenance issues. It has been well established that the type of oxide that forms on a surface is a critical factor in determining both general and localized corrosion behaviour. Both alloy composition and water chemistry affect the type of oxide that forms. Systematic studies that examine the effect of alloy composition on corrosion are rare and those available have been conducted mostly from a metallurgical perspective. There are even fewer studies that examine the combined effects of alloy composition and corrosion environment. A fundamental understanding of the mechanism by which the Fe to Ni ratio in a steel alloy influences the corrosion rate in different environments will provide valuable information that can be used for alloy selection and usage. We have investigated the effect of the Fe to Ni ratio of alloy on oxide formation and growth kinetics. For this study, customized steel alloys with different Ni contents and constant Cr content (18 ± 1 %) were prepared. The Ni content ranged from 15 to 25 wt.%, within the range between AISI 316L and Alloy 800 (Fig. 1). The corrosion kinetics was investigated using a combination of coupon corrosion tests and electrochemical measurements. These measurements were augmented by oxide surface and depth analyses using several spectroscopic and imaging techniques, and by post-test solution analyses for dissolved metal loss. We found that the oxide formed at pH 10.6 and 80 °C has a graded layer structure, consisting of a mixed spinel oxide (FeCr2O4/Fe3O4/NiFe2O4) as an inner layer and Ni(OH)2 as an outer layer. The increase in Ni content from 15 to 25 wt.% does not affect the inner layer but increases the thickness of the Ni(OH)2 layer. The increase in Ni content also decreases the total amount of dissolved metal loss. Gamma-irradiation of the corroding system increases the corrosion potential on these alloys. Correspondingly, gamma-radiation accelerates the formation of passive oxide layers and decreases the overall rate of metal dissolution. The observed kinetics of oxide growth and metal dissolution can be explained by the competition kinetics of oxide growth and dissolution for oxidized metals. Figure 1

Study of titanium nickelide based alloy structure effect on biological environment corrosion resistance

Electrochemical and surface characterization of a nickel–titanium alloy

Study on microstructure and corrosion resistance of Ti-doped nickel-based alloy coatings

Corrosion Properties of Ti-Nb-Sn Alloys Prepared by Mechanical Alloying

In vitro corrosion behavior of nano-multilayered TiN/Ti coated NiTi alloy

In Vitro Corrosion and Cytotoxicity on Microcrystalline, Nanocrystalline and Amorphous NiTi Alloy Fabricated by High Pressure Torsion

Corrosion Behavior of Nickel–Titanium Continuous-Casted Alloys

In vitro corrosion study by EIS of an equiatomic NiTi alloy and an implant quality AISI 316 stainless steel

Effect of Nickel Content on the Corrosion Behaviour of Stainless Steel at 80 °C

Enhanced Corrosion Resistance and Cellular Behavior of Ultrafine-Grained Biomedical NiTi Alloy with a Novel SrO–SiO2–TiO2 Sol–gel Coating

Microstructure, Hardness and Corrosion Behavior of Ni-Ti Alloy with the Addition of Rare Earth Metal Oxide (Gd2o3)

Tribocorrosion Behavior of NiTi Biomedical Alloy Processed by an Additive Manufacturing Laser Beam Directed Energy Deposition Technique

Effects of titanium nitride coatings on surface and corrosion characteristics of Ni-Ti alloy

Effect of titanium addition on the corrosion behavior of CoCuFeNiMn high entropy alloy

Tantalum coating inhibits Ni-migration from titanium out-diffusion in NiTi shape memory biomedical alloy

Electrochemical and wear properties of biomedical Ti–Nb–Ag alloy

Effect of heat treatment on the microstructure and in-situ corrosion behavior of SLM-NiTi alloys

Surface Characterization and Electrochemical Studies of Biomedical Niti Alloy Coated with Tin by Piiid

Corrosion Behavior of Nitrided Layer of Ti6Al4V Titanium Alloy by Hollow Cathodic Plasma Source Nitriding

Mechanical Properties, Bioactivity and Corrosion Resistance of Oxygen and Sodium Plasma Treated Nickel Titanium Shape Memory Alloy

Corrosion resistance, mechanical properties, corrosion fatigue strength and cytocompatibility of new Ti alloys without Al and V