Abstract:Wafer bonding technology is important for most MEMS devices' packaging, especially for RF-MEMS devices. Different materials systems, such as Au-Sn, Au-In, have been developed for wafer bonding. A new bonding system, using Ag-Sn, is investigated in this paper. Comparing to well developed Au-Sn bonding (typically bonding temperature of 280degC ), Ag-Sn would provide a potentially lower temperature, lower cost wafer-level bonding method. Both cap wafer and bottom wafer were sputtered with thin film Ti/Ni. Ti is the adhesion layer, and Ni is the wettability and barrier layer. Sn/Au was evaporated on Ti/Ni for cap wafer. The cap wafer was patterned by lift-off process. Ag was sputtered on Ti/Ni for bottom wafer. The thickness of Sn and Ag was designed based on the composition ratio of Ag3Sn in the bonding layer. Thin Au film could protect Sn from oxidation. Afterwards the cap wafer and substrate wafer were brought into contact and sent into the bonding machine. Bonding process was performed in a nitrogen environment. Different bonding parameters such as bonding force, bonding temperature, dwell time are studied. During bonding, the Sn melted when the temperature reached the melting point of Sn and the liquid Sn broke up the barrier layer of the intermetallic compound of Au and Sn. Then the liquid Sn wetted and dissolved the Ag layer to form the intermetallic compound Ag3Sn. The growth of such an interfacial Ag3Sn intermetallic compound is a liquid-solid diffusion process. The main compositions of the bonding interface are pure Ag and Ag3Sn intermetallic compound, which was investigated by SEM and ED AX. Shear strength of the as-bonded structure and those after reliability tests were measured by a shear force tester. The reliability tests include pressure cooker test (PCT) and thermal cycling test (TCT). It has been concluded that the Ag- Sn bonding with delicately designed bonding process one of the potential methods for wafer- bonding.

Room Temperature Bonding of Si and Si Wafers by Using Mo/Au Nano-Adhesion Layers

Room temperature bonding of diamond/Si with Mo/Au interlayers in atmospheric air

Room Temperature Bonding of Semiconductor Materials Based on Mo/Au Interlayer

Room-temperature Si-SiN Wafer Bonding by Nano-Adhesion Layer Method

Room-temperature Si-Si and Si-SiN wafer bonding

Investigation on the bonding quality of GaN and Si wafers bonded with Mo/Au nano-layer in atmospheric air

Low-Temperature Wafer-to-Wafer Bonding Using Intermediate Metals

Low Temperature Al Based Wafer Bonding Using Sn As Intermediate Layer

Influence of Post-Bonding Annealing Treatment on Interface Characteristics of Si-Si Wafer Bonded Via Room Temperature Surface Activation

RoomTemperature Si/Si WaferDirect Bonding inAir

Nanoscopic Characterization and Mechanism Analysis of LiTaO3/Si Interfaces Prepared by Mo/Au Nanoadhesive Layers for Applications in LiTaO3-Based Devices

Study on Au-Si Bonding of Wafer Level MEMS Vacuum Packaging

Low Temperature Silicon Wafer‐to‐Wafer Bonding with Nickel Silicide

Investigation of Au/Si Eutectic Wafer Bonding for MEMS Accelerometers

Room Temperature Electrical Bonding Technique Based on Titled Copper Nanowire Fastener with Anisotropic Adhesion Properties

Room Temperature Bonding of GaN on Diamond Wafers by Using Mo/Au Nano-Layer for High-Power Semiconductor Devices

Mechanisms for room temperature direct wafer bonding

Room-Temperature Bonding Using Fluorine Containing Plasma Activation and Its Bonding Mechanism

Ag-Sn Fluxless Wafer Bonding Technology

Low Temperature Si/Si Wafer Direct Bonding Using a Plasma Activated Method

A Model of Low‐Temperature Wafer Bonding And Its Applications