Abstract:Dynamic response of open-cell metal foam under low-velocity impact loading is important in applications involving impact resistance and energy absorption, etc. Assuming that metal foam is a conceptually continuous material, the macroscopic mechanical behaviors, both static and dynamic, must be studied. Within the dynamic mechanical properties of metal foam, impact response becomes the renewed interest to understand the characteristics of impact deformation. The present work aims to experimentally and numerically analyze the low-velocity impact response of open-cell metal foam. A series of low-velocity drop impact tests are realized on the open-cell metal foam samples with different relative densities and at different impact velocity. Afterwards, a well compiled program in Python controls the whole multiple drop impact process on each sample of metal foam. Corresponding numerical modeling and the simulation for single impact analysis are continuously carried out with the finite element (FE) program ABAQUS/Explicit. Proper meshing technique, loading and boundary conditions are conducted on all the foam models, and at the same time, the required mechanical properties: elastic module, Poisson's ratio, uniaxial stress-strain response and strain-rate dependence are utilized. In conclusion, the simulated results provide the good agreements with the experimental results in the case of low-velocity impact testing of open-cell metal foam. Experimental procedure and numerical simulation offer good approaches to improve the impact resistance and energy absorption of the open-cell metal foam.

Flow Stress of Open-Celled Aluminum Foams Based on Current Density and the Optimal Foam for Energy Absorption

Fabrication and Compressive Behavior of Open-Cell Aluminum Foams Via Infiltration Casting Using Spherical CaCl2 Space-Holders

Compressive Properties and Energy Absorption of Aluminum Foams with a Wide Range of Relative Densities

An Analytical Stress-Strain Model for Open-Cell Metal Foam

The Strain Rate and Density Dependence of the Mechanical Properties of Closed-Cell Aluminum Foam

Micro-CT in the mechanical properties and energy absorption of closed-cell aluminium foam

Deformation mechanism of closed-cell aluminum foam under uniaxial compression

Dynamic and Static Compression Tests and FEA Analyses of Aluminum Foam Specimen with Variable Density in the Loading Direction

Low Strain Rate Compressive Behavior of High Porosity Closed-Cell Aluminum Foams

Effect of Cell Diameter Variations on the Mechanical Behavior of Aluminum Foams: Experiments and Modeling

Compressive behavior and energy absorption analysis of casting skin-wrapped aluminum foams

Early Compressive Deformation of Closed-Cell Aluminum Foam Based on a Three-Dimensional Realistic Structure

Influence of Cell Wall Material and Cell Numbers on Mechanical Properties of Closed-Cell Aluminum Foams

Unlocking the Thermal Efficiency of Irregular Open-Cell Metal Foams: A Computational Exploration of Flow Dynamics and Heat Transfer Phenomena

Experimental Investigation of the Fatigue Crack Propagation in a Closed-Cell Aluminum Alloy Foam

A Simulation Method to Evaluate Electrical Conductivity of Closed-Cell Aluminum Foam

Experimental investigation of the fatigue of closed-cell aluminum alloy foam

Mechanical Properties Of Open-Cell Metal Foams Under Low-Velocity Impact Loading

Study on Quasi-Static Compressive Properties of Aluminum Foam-Epoxy Resin Composite Structures

THE MECHANICAL BEHAVIORS OF CLOSED-CELL ALUMINUM-ALLOY FOAMS WITH SPHERICAL PORES

Rate-Dependent Constitutive Model Coupled with Temperature Softening for Open-Cell Aluminum Foam