Abstract:Commercial application of Li–S batteries is greatly restricted by their unsatisfactory cycle retention and poor cycling life originating from the lithium polysulfide (LiPS) shuttling effect and sluggish sulfur redox kinetics. Various strategies have been proposed to boost the performances of Li–S batteries, including nanostructured sulfur composites, functional separators/interlayers, electrode/electrolyte additives, and so on. However, how to combine two or more strategies to efficiently settle these challenging issues confronted by Li–S batteries is in desperate need. Here, we demonstrate a powerful combined strategy of introducing novel 3D WS2/carbon nanotube (CNT) networks built by hybridization of 1D CNTs with 2D WS2 into Li–S batteries, simultaneously serving as a functional cathode additive and separator coating. Such 3D WS2/CNTs networks with abundant edge sites, a large active surface, and a fast electron pathway twice perform functions from the cathode side and separator surface: (1) to suppress polysulfide diffusion through a physical barrier and chemical interactions; (2) to accelerate LiPS conversion reactions; and (3) to enhance conductivity for better sulfur reactivation and high utilization. As a result, the as-built WS2/CNTs-incorporated battery configuration achieves a commendable combination of capacity, rate, and cycle stability (1491 mA h g–1 at 0.2 C, 754 mA h g–1 at 5 C, and initial capacity of 1069 mA h g–1 with an ultralow decay rate of 0.040% per cycle over 1000 cycles at 1 C) along with remarkably mitigated anode corrosion and low self-discharge.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c13193.TG plot for the Super-P/sulfur composite, SEM images of CNTs, XPS survey spectra of WS2/CNTs before and after Li2S6 adsorption, optimized WS2 (001) surface model and Li2S6 molecular structure, SEM images of PP and WS2/CNTs separators and digital images of the WS2/CNTs separator under bending/folding and after cycling, SEM image coupled with EDX mappings and TEM image of WS2/CNTs after cycling, polysulfide penetration test of PP, CNT, and WS2/CNTs separators, equivalent circuit models and EIS simulation results, CV and GCD profiles of four different battery configurations, and GCD profiles of the battery using WS2/CNTs as a cathode additive and separator coating at different scan rates, and electrochemical performance comparison of Li–S batteries based on different functional separators or cathode additives (PDF)This article has not yet been cited by other publications.

Carbon Nanotubes/sic Prepared by Catalytic Chemical Vapor Deposition As Scaffold for Improved Lithium-Sulfur Batteries

Porous carbon nanotubes microspheres decorated with strong catalyst cobalt nanoparticles as an effective sulfur host for lithium-sulfur battery

Enhanced Adsorption of Polysulfides on Carbon Nanotubes/Boron Nitride Fibers for High-Performance Lithium-Sulfur Batteries

Carbon Nanotubes-Intercalated Co-N-C As a Robust Sulfur Host for Lithium-Sulfur Batteries

Nitrogen-doped nanotubes and few-layer montmorillonite composites as an effective polysulfides adsorbent for lithium–sulfur batteries

Sulfur-containing polymer/carbon nanotube composite cathode materials for high-energy lithium–sulfur batteries

CuCo2S4 Nanoparticles Embedded in Carbon Nanotube Networks as Sulfur Hosts for High Performance Lithium-Sulfur Batteries

Controlled Construction of Cobalt-Doped Carbon Nanofiber-Carbon Nanotubes as a Freestanding Interlayer for Advanced Lithium-Sulfur Batteries

3D Tungsten Disulfide/Carbon Nanotube Networks as Separator Coatings and Cathode Additives for Stable and Fast Lithium–Sulfur Batteries

Self-Templated Formation of Interlaced Carbon Nanotubes Threaded Hollow Co3S4 Nanoboxes for High-Rate and Heat-Resistant Lithium-Sulfur Batteries.

Self-Templated Formation of Carbon Nanotubes Interpenetrating Ordered Microporous Carbon Nanospheres for High-Performance Li–S Batteries

Carbon Nanotube-encapsulated Chestnut Inner Shell O,N-doped Graded Porous Carbon as Stable and High-Sulfur Loading Electrode for Lithium-Sulfur Batteries

Silicon dioxide molecular sieve with mono-layer carbon deposited in the channels and carbon nanotubes on the outside for lithium–sulfur batteries

Preparation and properties of carbon-modified Ni-CNT@C applied to high-performance lithium-sulfur battery

CNTs@S Composite As Cathode for All-Solid-state Lithium-Sulfur Batteries with Ultralong Cycle Life

Nitrogen-Doped Hollow Carbon Polyhedrons With Carbon Nanotubes Surface Layers As Effective Sulfur Hosts For High-Rate, Long-Lifespan Lithium-Sulfur Batteries

Carbon Nanotube-Connected Yolk–Shell Carbon Nanopolyhedras with Cobalt and Nitrogen Doping As Sulfur Immobilizers for High-Performance Lithium–Sulfur Batteries

Fabrication of NiFe-LDHs Modified Carbon Nanotubes as the High-Performance Sulfur Host for Lithium–Sulfur Batteries

Rational Fabrication of Nitrogen and Sulfur Codoped Carbon Nanotubes/MoS2 for High-Performance Lithium-Sulfur Batteries

Fe-Nx Sites enriched microporous carbon nanoflower planted with tangled bamboo-like carbon nanotube as a strong polysulfides anchor for lithium–sulfur batteries

Synthesis of CoO Nanocrystals Decorated Porous Carbon Nanotube Microspheres As Sulfur Host for High Performance Li/S Batteries.