Abstract:The present work proposes to investigate the effect of an ultrahigh molecular weight silicone rubber (UHMW-SR) and two ethylene methyl acrylate copolymers (EMA) with different methyl acrylate (MA) content on the mechanical and fire performance of a fireproof acrylonitrile butadiene styrene copolymer (ABS) composite, with an optimum amount of ammonium polyphosphate (APP) and aluminum diethyl phosphinate (AlPi). ABS formulations with a global flame retardant weight content of 20 wt.% (ABS P) were melt-compounded, with and without EMA and UHMW-SR, in a Brabender mixer. During this batch process, ABS P formulations with UHMW-SR and/or EMA registered lower torque values than those of ABS P. By means of scanning electron microscopy (SEM), it was possible to observe that all ABS composites exhibited a homogenous structure without phase separation or particle agglomeration. Slightly improved interfacial interaction between the well-dispersed flame-retardant particles in the presence of EMA and/or UHMW-SR was also noticed. Furthermore, synergies in mechanical properties by adding both EMA and UHMW-SR into ABS P were ascertained. An enhancement of molecular mobility that contributed to the softening of ABS P was observed under dynamic mechanical thermal analysis (DMTA). An improvement of its flexibility, ductility and toughness were also registered under three-point-bending trials, and even more remarkable synergies were noticed in Charpy notched impact strength. Particularly, a 212% increase was achieved when 5 wt.% of EMA with 29 wt.% of MA and 2 wt.% of UHMW-SR in ABS P (ABS E29 S P) were added. Thermogravimetric analysis (TGA) showed that the presence of EMA copolymers in ABS P formulations did not interfere with its thermal decomposition, whereas UHMW-SR presence decreased its thermal stability at the beginning of the decomposition. Although the addition of EMA or UHMW-SR, as well as the combination of both in ABS P increased the pHRR in cone calorimetry, UL 94 V-0 classification was maintained for all flame-retarded ABS composites. In addition, through SEM analysis of cone calorimetry sample residue, a more cohesive surface char layer, with Si-O-C network formation confirmed by Fourier transform infrared (FTIR), was shown in ABS P formulations with UHMW-SR.

Preparation and properties of antibacterial ABS plastics based on polymeric quaternary phosphonium salts antibacterial agents

Nucleating Agent-Containing P(Lla-Mb-Bsa) Multi-Block Copolymers with Balanced Mechanical Properties

Preparation and Evaluation of Antibacterial Functional Plastics

Synthesis of Quaternary Fluoroalkyl Phosphonium Salts with High Thermal Stability and Their Application As Antibacterial Agents for Polycarbonate (PC)

Research on effect of ABS,MAH,DCP on property of PA6/ABS blend

Preparation and Characterization of Antibacterial Polycarbonate (PC) Using Quaternary Fluoroalkyl Phosphonium Salts with Various Counter Anions

Controllable Synthesis and Antimicrobial Activities of Acrylate Polymers Containing Quaternary Ammonium Salts

Preparation and Characterization of Antibacterial Polycarbonate (PC) Using High Thermal Resistant Quaternary Fluoroalkyl Phosphonium Salts as Antibacterial Agents

Preparation and properties of antibacterial styrene‐acrylic emulsion based on bis‐quaternary ammonium salt‐containing mono‐methacrylates as polymerizable antibacterial agents

Preparation and antibacterial properties of polypropylene composite with bisphenol A-type benzoxazine

Preparation of PC MABS Alloys by Bulk and Their Properties

Synthesis of N-Phenylmaleimide/Styrene/Alpha Methyl Styrene/Maleic Anhydride Tetrapolymers and Its Modification to ABS Resin

Phosphorus-Based Flame-Retardant Acrylonitrile Butadiene Styrene Copolymer with Enhanced Mechanical Properties by Combining Ultrahigh Molecular Weight Silicone Rubber and Ethylene Methyl Acrylate Copolymer

Enhanced heat resistance of ABS/poly(N-(4-fluorophenyl) maleimide-alt-triallyl isocyanurate) composites based on solid-state interfacial reaction

Application of polyhexamethylene guanidine hydrochloride to polylactic acid/polyphenylene block copolymer antibacterial composite membranes: Manufacturing technique and property evaluations

Synthesis and Antibacterial Performance of Quaternary Phosphonium Salts with Reactive Hydroxyl Group

Preparation of an Antibacterial Branched Polyamide 6 via Hydrolytic Ring-Opening Co-Polymerization of ε-Caprolactam and Lysine Derivative

A Novel Functional Compatibilization Strategy for Poly(lactic acid) and Poly(butylene adipate- co -butylene terephthalate) Blends to Achieve a Stable Co-continuous Structure and Excellent Antibacterial Performance

Structure and Properties of Heat‐resistant ABS Resins Innovated by NSM Random Copolymer

Quaternarized cationic poly[(vinyl chloride)‐ co ‐(vinyl chloroacetate)] binary copolymer as non‐migration antibacterial additive in PVC matrix

Synthesis and Antimicrobial Activities of Acrylamide Polymers Containing Quaternary Ammonium Salts on Bacteria and Phytopathogenic Fungi