Abstract:A new structure of p-GaN/InGaN heterojunction has been proposed to enhance hole injection for blue GaN-based light-emitting diodes (LEDs). It is demonstrated by the simulation results that a p-GaN (50 nm)/In0.05Ga0.95N (150 nm) heterojunction can make a 25% and 10% increment of hole and electron concentration in the active region, respectively, finally resulting in a 55% improvement on the LED's radiative recombination intensity. The simulation also reveals that the efficiency droop is alleviated from 32.9% to 21.7% at the current density of 100 A cm(-2). The enhanced hole injection is mainly attributed to the increased average background hole concentration of the area between the p-AlGaN electron blocking layer (EBL) to the p-GaN/InGaN heterojunction. The increasing potential barrier of the conduction band, resulting from the introduction of p-GaN/InGaN heterojunction, would also weaken electron leakage and is favorable to the LED's luminous performance. The experimental results show that the wall-plug efficiency (WPE) of the p-GaN/InGaN LED increases by 26.0% at the injection current of 75 mA, in spite of the increasing electric resistance, which impairs the improvement of the LED's performance from the enhanced hole injection. The structure of the p-GaN/InGaN heterojunction is novel in the field of p-type region design, and is a simple but effective way to promote the LED's performance, which is very promising for application in further high-performance LED fabrication.

Enhanced Performance of InGaN‐Based Blue LEDs Using an AlGaN/InGaN Super‐Lattice Last Quantum Barrier

Improvement of Blue Llight-Ight-ight-eeemitting Mitting Ddiodes Iodes with an Undoped Graded Layer As the Electrons Tunneling Barrier Layer

A Gan-Algan-Ingan Last Quantum Barrier in an Ingan/Gan Multiple-Quantum-Well Blue Led

Graphene/p-AlGaN/p-GaN Electron Tunnelling Light Emitting Diodes with High External Quantum Efficiency

Improved the AlGaN-Based Ultraviolet LEDs Performance with Super-Lattice Structure Last Barrier

Performance Improvement of InGaN LEDs by Using Strain Compensated Last Quantum Barrier and Electron Blocking Layer

High Power InGaN/GaN MQWs Blue LED with AlGaN/GaN Blocking Layers

Improvement of Blue InGaN Light-Emitting Diodes with Gradually Increased Barrier Heights from N- to P-Layers

Status of GaN-based green light-emitting diodes*

Advantages of AlGaN-based Deep-Ultraviolet Light-Emitting Diodes with an Al-composition Graded Quantum Barrier.

Improved performance of GaN-based light-emitting diodes via AlInGaN/InGaN electron-emitting layer

InGaN multiple quantum well based light-emitting diodes with indium composition gradient InGaN quantum barriers

The marvelous optical performance of AlGaN-based deep ultraviolet light-emitting diodes with AlInGaN-based last quantum barrier and step electron blocking layer

A new structure of p-GaN/InGaN heterojunction to enhance hole injection for blue GaN-based LEDs

Realization of Highly Efficient InGaN Green LEDs with Sandwich-like Multiple Quantum Well Structure: Role of Enhanced Interwell Carrier Transport

Enhancing the Performance of GaN-Based Light-Emitting Diodes by Incorporating a Junction-Type Last Quantum Barrier

Enhanced Performance of GaInN LEDs by Abrupt Mg Doped P-Algan Electron Blocking Layer

Efficiency and radiative recombination rate enhancement in GaN/AlGaN multi-quantum well-based electron blocking layer free UV-LED for improved luminescence

Last-Quantum-Barrier-Free AlGaN Deep Ultraviolet LEDs With Boosted Efficiency

Performance Improvement of AlGaN-Based Deep Ultraviolet Light-Emitting Diodes with Step-Like Quantum Barriers

Quantum Efficiency Enhancement of a GaN-Based Green Light-Emitting Diode by a Graded Indium Composition p-Type InGaN Layer